What is ur temperature both idle and Full Load
?? THX
im planning to get this baby, but not sure my big typhoon can handle it below 50C(full load) in no air conditioned room

Let us see my 840EE [since 805 uses the same 'Presshot' core]


Full Load - 65*C
Idle Load - 51*C (50*C with SpeedStep....)

no, you're wrong. the 805D is using Smithfield core's.



but they do get hot...

go HERE . something interesting about the 805D

Pentium D series temps are better to prescot's if im not mistaken. My friend's Pentium D 830 temps are acceptable. I'll update with him later.

U are in LUCK!

http://www.tomshardware.com/2006/05/10/dual_41_ghz_cores/

Has anyone here managed to hit 4GHz ?

hmmm.. kinda reminds me of celeron 300A >> celeron 450 and celeron 566 > celeron 850...

classic items..

Though the 975 board itself is already at a killer price. I myself dun find this solution at all budget, but it sure gives high end systems a run for their money

you dont need a 975 board to run a 805D. any mobo that support dual core pentium can be used. mobo based on the SIS chipset is pretty cheap. so it makes it a budget buy dont you think?

Ya, it's Tom's hardware selection of wrong mobo (low price cpu + high price mobo).
Here is a better combo:
http://www.madshrimps.be/?action=getarticle&articID=437

This post has been edited by davidletterboyz: May 11 2006, 10:52 PM

although it is virtually smithfield but it's physically 2 x Presscott 1M core..

refer here..
almost 4GHz..

with stock heatsink if ur temp exceeding 60 degree during load it is normal.. even at stock speed..

This post has been edited by newbieockids: May 11 2006, 11:06 PM

Refering to the article. The power consumption is indeed horrible. Air cond rooms only perhaps

Thx for the nice reply...

4 Gigs....im shy of a couple mhz b4 claiming that i achieve that

by the way my temps...

idle: 41c 38c (at nite)

full load: 78c 75c (at nite)

you running it at 4Ghz?? may i know what cooler u are using?

I use Asus P5RD1-VM Ati200 all in one mobo. It does not have any vcore adjustment.

I can achieve 3.6G. Asus probe reading 1.18-1.25v. Which is way below the 1.4v default.

Full load of folding with 8 clients is like 40c at day time and 35c at night time. No air cond.

Also, for PD8xx , there are 2 versions. 1 is revision A0. 1 is revision B0. The PD805 is B0. Which is much cooler. I previously have a PD830 rev A0. At 3.6G and same 8 clients folding, the temperature is 90c. I can feel the hot air coming out. Good to dry my cloth if urgent.

Now, the air coming out from the heatsink is not hot at all. It is only as hot as my forehead.

Smithfield is 2 x Prescott. Intel married the 2 Prescott and they are call Smithfiled.

Ur temerature is very low... are u using watercooled?

Nope. Just Ninja with 100cfm fan. But open casing.

I think for P4/PD Prescott cpu, it is the voltage that make the temperature high.

My mobo cannot adjust the vcore. And some how, the vcore is quite low. But it still manage to go 3.6G 24/7 folding stable.

While I notice many people oc the PD805 to around 4.0-4.2G, but increase the vcore to >1.45v, the temperature goes quite high. More than 50c.

I am assuming that a little bit of vcore increse, makes the temperature goes unpropotionally high. While a little bit of lower vcore, makes the temperature unpropotionally low.

I am not regret that I can only go to 3.6G. Because the usual max limit of P4/PD Prescott is about 4G under normal air cool condition.

I won't be greedy to want to get that extra mhz. At least I know I can sleep well knowing that my temperature is cooler than my body temperature.

hitting 4ghz need 500w pure power PSU.. i guess

PD 8xx as well as 9xx is known to be hot and high power consumption..

i read the Tom's review on PD 805.. at 4.1ghz consume 400w+

this baby gonna makes my electricity bill increase rm20 per month

wow if a 4ghz core requires 400W++ then i need a 1k PSU to power up my cards in SLI and a few raptors heh?

izzit for all Intel or Pentium D only? mine is soc 478? oso "telan" alot of power??

stock cooler.....

OMG. it was unbelieveable

PD stock cooler really kickass

the 400W+ consumption is for the whole system. no way a proc will eat that much

omg...so i was wrong.... so the right formula is "2 x PressH0T (Sun Surface) = Smithfield (Hell)"

I agree. It's difficult to even tame a single Prescott, now u have 2

big consumtion...

Can intel original fan OC till 3Ghz??? what is the temp? Using PD here...

im using ori hsf n running @3.5ghz... temp 37-39 in non aircond room...

wow...upgrade already. cannot push any higher??

wow! Ori fan can OC so high ark? mine not air cond room leh!....

me non-aircond room...

shah81, my socket A mobo dead edi...

dun hv time to push further..maybe will try tis weekend... last saturday tried 3.7@default vcore but not stable...

This post has been edited by lactose_operon: Jun 5 2006, 06:18 PM

dude..im on stock cooling... n my room seldomly use aircond...the temp i got is non-airconditioned...

ooo... icic I'm using Asus P5SD2-x Can OC till 3.7Ghz?? sket temp very high!

Smithfield = 2xPrescott

This post has been edited by pcmoddingmy: Jun 6 2006, 04:05 AM

wahh.. prescott x2 arr. sure the temp is x2 oso .. jk onli

This post has been edited by gengstapo: Jun 6 2006, 08:53 AM

cough..cough..




Attached thumbnail(s)

idle = 39C
full load = 4xC

all on stock..nvr start OC yet..need some guts n guide 2 start OC this

welcome to the club bro

using PD 805 on abit IL8. idle 41 ~ load almost 60 .. all stuff still stock

Sure can 1..Big typhoon's a good cooler lar..

This post has been edited by max_cjs0101: Jul 7 2006, 12:59 PM

may i know what r u all talking about....
how to do the over clocking stuff???

Pentium D 805 (D.Core) 2.60 533 2 MB
GA-8I945PL-G MB
80 GB Maxtor SATA2 8 MB cache
1GB Corsair DDR-400 512MB x 2 pieces
Gigabyte Nvidia 6500 PCI Express Card
Gigabyte cooling fan - gh-pdu21-mf
iCute case
17" Viewsonic LCD
LG DVD R

I never see it go over 50c, Average is 36c daytime - cooling unit is awesome.. gh-pdu21-mf

Overclocked to 3.2 Ghz


Full Load


Idle


Casing



Bought at All IT, good shop, good people, good prices.

in non-aircon ambient? mmm...seems like Pentium D is not as hot as i tot

no aircon here..

Here is the cooling unit

so this is the magic behind huh? very impressive review, how much did u buy btw?

160 rm

my whole system including display was around 2600 rm, not bad ?

Hi All,

I'm running a Pentium 805D on a Gigabyte KN8-SLI mobo. Max stable overclock I have is at 3.9ghz with a mem timing of 4-4-4-12 at a cpu voltage of 1.52v. Managed to run 2 instances of prime95 without any thermal throttling.

But when I bump the FSB to get a 4.0Ghz speed my system is unstable, even with the cpu voltage of 1.56...darn not go any higher....jump it cost it cpu pops

update:

PD805 @ 3.2ghz @ TT Big Typhoon

idle:39C
load:47C

Pentium D is very hot huh?????

Mine PD 820.....

idle temp 63C
load temp 80C


is it normal???

What is ur temperature both idle and Full Load ???


mine
idle : 63'C
full load : 80'C

is it normal????

Your temps are very high. If not overclocked and on stock cooler should be in the region of 38 to 40 degrees. Maybe you should try to cool you casing better.

aiya me too..
after improved ventilation
temp idle 50-55. huhuhh

Anyone here tried to water cool their D proc? I am curious what kinda overclocks are possible.

I am using the coolermaster 500watt supply, it have a analogue power draw meter and when the 805 is clocked at 3.9 Ghz, the power draw is around 350watt plus. Crazy eh...

ur proc is veli hot..mine nw @ 3.4ghz..temp reading is

idle : 41C
load : 49C

my PD 805 oso seems to be hot !! last night...

Idle temp : 118`C .. hot ehh ?

118c or f?
if that ur temp i dunno ur proc still alive or not?

118 can turn ur casing into oven already.

kenot b 118C la..impossible..mayb ur temp reading smthg wrong oledi

else we wont c u post here oledi

118 f i guess..cannot be 118c.. fried egg also can liao.

aiyakk... i sooo sure its 118 C .. but dat was idle temp .. my abit eq mess up my sensor so i was a bit shock .. now ok already .. idle 35C and load 53C

update ur bios 1st

then ur sensor smthg wrong oledi la..

i don think my sensor GOT PROBS because last time when I was priming my system for 4 min.. it always shutdown. sometin wrong wit my abit temp detection. all reading mess up ... sometimes true.. sometimes not.. so now i updated to latest bios n temp dectection software.. no prob so far ....

This post has been edited by Devilc0de: Aug 9 2006, 07:32 PM

where can see tempature for my pc?

if u use intel board.. proabaly got..
if not.. not sur how to see..

u can always c it in ur bios..or if ur mobo provide any monitoring sw,then u can view it from there too

what cpu cooler is good for this processor ? my board is micro atx, so not enuff space to put enormous heatsink. can someone intro me a nice cooler around the same size as the stock one ? thanks !

why not u try gigabyte cooler.. kinda small .. check dis out http://www.neoseeker.com/Articles/Hardware.../pcu21vg/1.html

how many rpm should the stock fan run on idle and on load ? even with the PWM my one run noisier than my kelisa engine. it reaches 4.6k rpm sometimes, and with that my idle temperature will be around 39celcius. Since my mobo is an Asus, i turn on the Q-fan, and this has caused a tremendous drop of RPM til less than 2k rpm using stock fan, however my idle temperature started to rise up til 45-47celcius with casing closed. does that consider ok ?

hi everyone , i m PD805 owner too..
my 805 is running @ 3.4 ,gigabyte 945PG wit ori heatsink
idle = 40 c
full load = 47-49 C
nice processor at low price

wah low la ur temps. use stock cooling ar? or in air con room? or both?

my casing air flow sucks la..close casing temp go up to 45C idle..crazy

CM led silent useless one..cant suck hot air out

Yes , stock cooling wit no air con

my PD 805 temp .. oc to 3.0 ghz . non air con on gigabyte G power pro cooler and CM centurion 5 casing

Sweet Tempreture

Pd owner here,stock speed 2.66ghz,msi 945plneo,stock cooling,no aircond,full load 51-54c any suggestion to cool it down ?

if full load 51-54 ok what. my idle is 52'c. stock clock and cooling. ambient temperature 53'c. remote temp 60'c. remote temp is where ar?

my friend not dual core oo also 5+ on ideal than when full load around 7+

idle temp should be in the region of 30's to low 40's...on stock speed...but if OC then depend on ur volt increase set on the CPU Core...but for 805D the cpu will start to throttle down when temp reaches around 62 C.

full load at tht temp is still ok

i will suggest u change ur hsf

hey dude!!wat's ur temp @ 3.9ghz?

my cpu idls at 52'c. fan speed 1.2k rpm. if stock like that ar? any way to increase fan cpu fan speed?

Jason,

My idle temp at 3.9ghz is around 40C and on full load with 2 instances of prime95 running its around 60C...just barely under the threshold before the cpu starts to throttle...but if I'm running it at 4.0ghz then on full load it will start to thermal throttle the cpu....maybe with water cooling

14 - intel 3.6 overheat

if u look at tom's hardware guide video.. as title above...

i want to know wut;s the diff between hsf of pend 2.6 and p4 that use the round hsf too.. lga775 rite..

fantagero, the link doesnt work

Jason,

My screen shot as below when running at 3.9ghz

voltmodding LGA procs! woot!

http://vr-zone.com/index.php?i=3931

Just bought PD 805 and MSI PM8M3-V H mobo hehehe now plan to buy TT Big Typhoon.. BT really good eh?

Taku,

The big typhoon is a good HS + Fan combo, but if you intend to overclock then you will probably need to take a look at ur mobo among other stuff. But I guess the question is, are you planning to OC ur 805?

Mine's going fine at 4.0ghz.. using watercooling to about 40+ at full load

If anyone's interested, I got an old TT fan that I used all the way up to 3.6 w/o any over heating problems

hmm i bought a cheap mobo coz i tot i only lost my mobo (search at tech support for my case) n want to upgrade to dual core. had i knew my ram n gc also fried i must have upgraded the whole system. Anyways here in kerteh is very hot plus my room's ventilation is not that good.. OC? of coz heheheh

note: just bought mobo oledi want to sell aiyooo cost-benefit analysis fail ooo
running temp @ 59C.. ok or not

This post has been edited by takumin_86: Sep 10 2006, 08:01 PM

hiya taku,

sorry to hear what happened to ur mobo,gc & ram, happens to the best of us sometimes, but cheer up, at least it gives u an excuse to upgrade

59 C is pretty hot, ur quite close to the thermal throttle limit of the Proc, what they temp taken with ur case open or closed? OC'ed already or still at stock speed?

uiyooo at limit ka? must buy TT BT hehehe.. no OC n case open, but my case cover got big fan.. the reason i don't close coz now borrow ram n gc.. anytime the owner can mintak balik

hiya taku, seems like most of ur rig is borrowed

burger.. huhuh i aint giving any link.. huhuh

but after searching.. found it
http://www.tomshardware.com/2004/11/14/the_p4/index.html
http://www.tomshardware.com/site/videos/index.html
hope u can watch the video 1st

BurgerRI,ur temp @ 3.9 is really good..mine @ 3.6 oledi reach 42-44

using BT n casing close..

jason, what ur temp with dual prime95 running?