yo everybody.. my temp now 43C yeay hahaha waiting for my RAMs n then i'll try to OC.. but coolant not enuf need to buy some more

aarrgghh demmit my mobo manual said can OC but cannot.. anybody OC using MSI 7211? aaarrgh tensen

Anybody is into down volting vcore? So far, i have managed to run my PD805 at 1.17x vcore @ 3.32GHz. Havent try lower vcore yet hehehe.
Temperature is great...never exceed 53C full load. Stock cooling + 120mm fan.

I do have PD805 with Ninja.

Using Asus P5RD1 DDR1 mobo with built-in x300se.  No vcore.  No vdimm.  No voltage adjustment at all.  Can change FSB.

Currently at 175fsb for 3.5G.  Voltage is default, but is between 1.18v - 1.23v.  Temp fully loaded with folding is below 45c.  Can be as low as 38c if at night and raining.

mruzian, hey can see that your able to clock ur 805 at 3.8Ghz...any higher? whats your load temp at 3.8Ghz?

hey man...glad that u went for r120  
Was a bit suprised that it beats TT BT VX by a big margin..thought it could only better 3-5C. 

water cooled is always goin to be better..

I wonder if anyone on lyn broke the 4ghz barrier??

anyone managed to break the 4.0ghz barrier and run stable yet?

I'm thinking about ditching my 805...wanna get a 930...that should be more overclockable rite..

managed to hit a stable 4ghz on a 805d. also able to hit 4.1ghz but I reckon my memory is letting me down, it does seem to be stable or either that its my mobo.

I wasen't want to compare c2d with Pent.D la  fren..
Can tell me how much is PentD's CPU multiplier? Izzit locked?
When OC just adjust the FSB like c2d ?? and set optimum vCore rite?

Edit: Wao.. so good!! PentD can OC more than 50% (2.66 to 4.0Ghz) intresting

I was testing out another proc in my mobo for a couple of days....after that remounted my 805d...without wiping off and reapply a fresh coat of AS5.... my temps were all over the place...proc was thermal throttling even at 3.6ghz....lol...   

(Note to self - reapply new layer of thermal paste everytime remounting CPU) 

Took out my 805D, wiped it down...then felt kinda free, went and lapped the proc 

After reapplying a new coat of AS5...temps are fantastic...

In a non air conditioned room (proc running at 4.0Ghz)
Idle - low 30's C
Load - 50C
(load was done with 2 instaces of prime95)

Let AS5 settle then gonna try higher...lol..things ppl done with too free during weekends..lol

Will try to post some pics up later..wanna let it burn in first.

Using the water cooling kit from the Metalzone bulk. Its a whitwater waterblock with swifttech rad.

I'm curious how those other ppl can manage to clock their 805d's to 5 ghz plus, prbly using phase change cooling 

mm..got 3.2 already..quite ok..

more specific pls..

mm..already reach 3.6 ..might need use better psu..cuz i cant go more than 1.4Vcore.