Later on can cabut then upgrade then pasang balik.. No worries, this is how we learn!

I would like to ask , is XSPC RS 240 kit worth investing in? This will be my first water-cooling rig.

The casing i'm currently using is Xigmatek Asgard 382 , does the radiator able to mount on top of my casing with the fan push setup?

I scare it will have clearance issue? Any sifu can help?

Since i'm located in Kuching , not much shop do water-cooling, and no local shop sell XSPC Kit , so i need to order from KL.

Ya, when I change the mobo, I slowly take out whole wc loop...so heavy !! Exspecialy the gpu wb!! Luckily done it smoothly

U got oc or no? if no, u wont notice any different. U need to measure the length between the top of casing until mobo...c can fit the rad with fans or no?
If u worry, u can ask Niclasteoh in onetj help u setup

This post has been edited by shin6619: Jun 17 2013, 07:55 PM

No overclocking , actually i planned to install watercooling just for good looking reason thought. What i scare is it touches the capacitor on the motherboard. Actually i called Niclasteoh for quotation of a custom watercooling kit , + installation etc roughly would be around RM700+ which is out of my budget thought. My budget was around RM600+/-, the kit would cost RM500 and shipping here would cost roughly RM30 (assumption) , installation charge by Niclasteoh RM65 exclude coolant yet, so the main problem here actually was my casing and side issue is my budget problem.

If you willing to help me install then different story la

Don't really know how to measure thought, >_<

This post has been edited by ValityMental: Jun 17 2013, 08:08 PM

Sorry for cant help u install
Because my time full by job, wife and 3 kids..
Try do more research in google and YouTube...
U can do it

ValityMental is the kit you're intersted in using a Raystorm block or a Rasa block?

If it's using a Rasa block, it won't do much for your looks, if you ask me, anyway.

Why not consider Swiftech's AIO solution instead? Works like a proper custom kit, but installs like a regular cooler, IIRC. Looks pretty mean too.

Something to share with you guys.

Just arrived today.

It's okay. I see, no worry bro. Will do some research thought, what i scare now is the clearance issue only If no clearance issue i will straight buy , money ready liao , save for months my pocket money


I'm not sure which one thought , but i know it's with led.

XSPC Raystorm X20 750 RS240

The reason i choose custom water-cooling is because of the tube only la , the tube with coolant really

You're sexy and you know it. Aww!

Ugh, why did I just do that?

Oh ok. Raystorm. yeah then it'll be fancy. haha. stock tubing for XSPC is quite bad though.

LOL

IKR. I'm still looking for a low MOQ EN plater. So hard to find.

The cost of a custom block.

Yeah. Haha. Thanks for the clarification Totally new in pc world thought, just started a while.

I know , heard lots of them saying it's bad. I will grab the clear tube from Niclasteoh , if i'm not mistaken 1m is like rm20+/- . And i just need to buy distilled water and dye for it. Then i'm ready to go , i don't wish to mount the rad and fan on top (Outside) the case , which gonna look bad. Was planning to buy new casing first , but if i buy casing first , then wc gonna be postpone for months again

Dont worry...no clearance issue !!

if u wish to change to good tubing, i offer u my new 3 meter durelene tubing rm80 if u interest...pm me if u wan

This post has been edited by shin6619: Jun 17 2013, 08:26 PM

How you know no clearance issue bro? Let me take pic of my rig for u guys to have a look.



Sorry for the unclear picture. Will take a better one. This is taken previously.




Attached thumbnail(s)

sorry..missunderstanding


emmm...i think only can mount with rad and 15mm height slim fan

This post has been edited by shin6619: Jun 17 2013, 08:34 PM

Just measured , the top to the motherboard is approximately 2.5CM-2.6CM

Around that , so yeah

cant mount....rs240 Dimensions: 121x35x277mm (WxDxH)

u better change casing 1st

If you plan on buying the kit from WM, buy from APES or Cyntrix Technologies. They have better tubing options. You can ask for Clearflex/XSPC Premium tubing from Cyntrix or Primochill Advance LRT from APES. These are one of the better ones around.

If you buy from Cyntrix, I think he's got a custom XSPC starter kit so you totally won't get the stock XSPC tubing at all.

And if your clearance is only about 25mm, you will need to either:

1. Change case
2. Mount radiator elsewhere or externally

Good fans are typically 25mm so yeah.

This post has been edited by pristine: Jun 17 2013, 08:33 PM

Why sorry?

15CM height slim fan haha. Typo bro , 15MM.

So it's possible? The fan aren't a big issue right?



Picture taken just now.

Hopefully it help sifu in helping me >_<


Attached thumbnail(s)

sorry...type too fast
because i tot urs is other casing...

change to better casing 1st

This post has been edited by shin6619: Jun 17 2013, 08:38 PM