The latest BIOS 0031 is amazing. Hynix BFR is now working great and finally overclockable.

G.Skill RipjawsZ 2400C9







This post has been edited by owikh84: Jul 11 2013, 06:59 AM

I will test this week.... ...been busy with other things..last 3-4 days.

Btw,

CPU-Z 1.65.0 -(x32/64)........08.July 2013

ftp://ftp.cpuid.com/cpu-z/cpu-z_1.65-setup-en.exe
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.65-en.zip

Asus ROG CPU-Z 1.65.0

Installer:
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.65-rog-setup-en.exe

Portable 32/64-bit:
http://www.mediafire.com/?7sfdyh8gi7ouaad

CPUz-OC 1.65.0

Installer:
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.65-oc-setup-en.exe

Portable 32/64-bit:
http://www.mediafire.com/?53zjx28k36m8yel

G1.-CPUz 1.65.0

Installer:
ftp://ftp.cpuid.com/cpu-z/cpu-z_1.65-g1-setup-en.exe

Portable 32/64-bit:
http://www.mediafire.com/?ed8b6f4lwbiq37l

Cpuz 1.65 interferes with ai suite.

As AIDA64......same.

Low vcore but kinda hot
Mind trying SPI 32M benchable 5ghz what is the lowest vcore??

So far DDR3-2933 booting with my samsung @ 1.70V (not fine tune yet).



This post has been edited by stasio: Jul 12 2013, 06:59 PM

btw i bought the 2.4C9 BFR from owikh.

Now must get some samsungs and mfrs.

samsung 2666 C10 seems hard to get.

Bought myself the ASRock OC Formula Z87 from hikari85. Very powerful, fast boot, brilliant BIOS; yet worth the money.



Saw a lot of extreme crunchers playing with Samsung based RAM kits on this board so I'm not excluded.

G.Skill TridentX 2666C10 @ 2800 9-12-12-25-1T


Team Xtreme 2600C10 @ 2800 9-12-12-25-1T

Your ram voltage at 1.864v?

Give it 2v+ it's not gonna kill these baddass.
Remember old timer Reaper rated 2.2v?

I see. Only samsung-based RAM kits, high-performance kits or DDR3 in general?

This post has been edited by kmarc: Jul 13 2013, 10:59 AM

-sorry i didn't see it..-edited-

This post has been edited by primaroti: Jul 13 2013, 11:12 AM

Samsung scales well with voltage.
2.25v on air is possible.
Not for 24/7 of course I hope everybody can understand that.

2.25v!!?! Wow! Nice!

My rams rated 1.60v 2133mhz and I don't dare go above it.....

According to nickshih,
hynix bfr/cfr double sided sticks is impossible to do 1t on z87 ... It is platform limitation .
I still keep my bbse 8-9-8 and one more 2x4GB ripjaws 9-11-10 (samsung ic).


samsung 2666 C10
http://www.newegg.com/Product/Product.aspx...N82E16820231593

This post has been edited by stasio: Jul 13 2013, 04:55 PM

Did u see owikh running 1t up to 2600 on 4 sticks of bfr.

Hmm,maybe atm on the ASRock......
http://www.xtremesystems.org/forums/showth...l=1#post5198889

Btw,fast test.....4.5.......





This post has been edited by stasio: Jul 13 2013, 09:35 PM

nice

but here is a hint
linx/intel burn test will accept 0.05v to 0.1v less. but not prime
ure realy vcore up to 44 is the same as ure uncore..

meaning try running ure vcore and uncore at 44 both at the same voltage.

thats ure vcore. after that uncore gets tricky but vcore still can scale

btw i found the issue. running 2.4k C9 1T now.

No way u can do this on any other board. Sham RTL guide and bios 031.
Although it was a bit off... 4x4gb is different...

4.5.......LinX 10.3.12......fast test (still not trimmed)



IBT.......


This post has been edited by stasio: Jul 14 2013, 12:01 PM