Hi. Is it possible to order with an international plug instead of local plug? Like australia plug for example?

Looking for 4 plugs.

Modem, telephone, router and spare.
Unifi optic protection if have

Thank you

Cal-Lab do have 1x Universal socket usually...
if required full universal sockets, customization required.


you may use the combination of TRM-NIF-3 BU+PE and TRM-EP-UK2+US1 for 4-6 power sockets...

Sorry, I'm looking for international plug head, not socket. As in I want to plug in the cal lab into international socket.
eg: australia wall socket -> cal-lab -> appliance.

If don't have, can we change the plug head ourselves? All the components are in the socket box right?

Whats setup do i need if want to protect unifi setup. Protect the LAN?
Any model from TRM-NIF?
Thank you

all Cal-lab come with UK plug only.
You may change to desired plugs but the lightning protection efficiency may vary if compare to the tested standard setup.


Fiber inputs from TM? Is the analog telephone side by side with TM equipment?
any physical LAN cables from router to other PCs?

Thank you for the reply. Will consider my options, as I feel assured using cal-lab and would like to continue using them if my family decides to migrate.

This post has been edited by thewan: Oct 17 2019, 11:31 AM

hi, bro, I bought some of your protector quite some time ago. Now moving to new house and would like your recommendation to protect the following from lightning.

1. Home alarm system (the system come with LAN connection).
2. Autogate system.
3. Fridge.

As these will be on 24/7, need a good protection. Thank you.

for home alarm system, u can use SD-4C for power and LAN protection.
however RJ11 tel cable and each sensor cables may required to protect along too as those can lead the surges into your system

Fridge you may use NILI9920F

About the auto gate, best if you can advise the voltage spec of motor and push button.
I can proposed the right BOM as different auto gate system have different spec and design
http://site.callab2u.com/Clients/callab2u/...%20-%20pro1.bmp

Hello,

Could you pls pm me the price for SP9201-DAF?

I have one damage SP9201-DAf could you advise does your shop does exchange for the damage? Plan to buy one more new too.

Thank you.

bump

i dont have physical shop and none of cal-lab reseller are authorized to restore cal-lab unit.
Best if you could email to callabhq@gmail.com for the restoration request. At the same time you may purchase new units from Cal-Lab while they returning your restored SP9201DAF to minimize the delivery cost on single trip.

MDSC0039 can support 3500watt? I hv extension of 8 gang need to power on 4cpu + 4monitors.

any of this can be wire directly to the circuit breaker?
also any of it has universal socket?

standard power socket only up to 13amp / 2000watt.
Cal-Lab 10amp can support up to 1.5hp air con.
if you have requirement for 3500watt, your PC setup is almost about total 3.0hp air con total consumption. you sure for that?


nope, Cal-Lab dont have ELCB or MCB unit. it simply a "middle man" between the wall power socket and your equipment.
TRM series have universal socket but usually come with 1x universal + 2x UK.

Can it do like tis , 3 faces with power output , each face put 6 gang extension to power on 3pc + 3 monitor , so total power up 9pc + 9 monitor?
Will it overload?

i mean wire directly as in wire to the ELCB, so instead of plugging it to the wall socket. or i remove the wall socket, and direct wire it.

my late feedback.
Highly recommended seller. I bought another 3 units from him.

there have a DIY version which the cal-lab module allowed the open-ended cable to connect into.
but this required some experiences on basic power cabling to install it.

Hi TS,

got 6 socket plugs? Purposely for astro, unifi, ps4 & TV