MDSC0039 have 5amp and 10amp version... u can choose either 1 but recommended 5amp
unless the power consumption almost equivalent than 1hp a/c then u may need 10amp version

Here your setup configuration

ok bro.... agreed with the suggested number of device and add another MDSC0039 for my bro room since its for a pc only (so total 3 units of MDSC0039).

can give me the price and your account number inclusive postage to KL?
If no postage... I can meet u up at KL Convention Center for weekdays / any KL area for weekend.

btw i'm interested with the household automation - Automatic night-ON switch. how does it work and where I need to put at my light?

This post has been edited by exkaizen: May 15 2012, 10:12 PM

a bit difficult for me COD around KL...
but my daily working location at PJ, otherwise can COD at shah alam, sunway, subang, along LDP and kepong too...

so ur order is 3 unit MDSC0039 5amp and 2 unit SLAN1236? i will collect stock 2molo if confirmed and PM u the price...

the sensor of household automation should facing out the environment as it can detect the day light in order to swtich on & off the lamp...
but i required to check the stock availability as no much ppl buying it...

yup... my order is 3 unit MDSC0039 5amp and 2 unit SLAN1236...

For COD place we can set at a place to meet-up on weekend...

so the sensor connected between the plug and the lamp is it?

Can i use SF9512DSL for faxing & CLIP ? actually it's same thing and naming different only ?

faxing & clip is analog interface, you have to use ARD version
broadband is digital interface, you have to use DSL version

But the RJ-11 connector is same inside also same, right ?

Same connector (interface). But both version serve different equipments.

COD with gkl83 today morning... easy self installation since seller provide explain how to install... some advice and briefing given...

Good seller...

thanks gkl83, connected to Unifi, no problem with STB Box connection as well...

was introduced to your products by a friend recently. Recently many of my electrical equipment have been getting fried and very frequently. Last night was the worse as the lightning storm in my area & flash flood. It took out my TV or Satellite box (HDMI down still need to trouble shoot what the fried component), computer network card, NAS power adaptor, phone line also down.

In the past 12 months, 2 adsl modems and 2 satellite box =.=''''

Whats best for my current set up.

Point A powers:
-adsl modem (subscribed to Streamyx)
-wireless router
-8 port switch (because previous hit took out the router ports, only 2 left and getting a switch was a cheap & quick solution)
-NAS (network attached storage)
-Laser printer

Point B powers
-Desktop computer (network via LAN cable)
-monitor
-speakers

Point C powers
-TV
-HiFi
-Satellite Boxes (one box is connected via LAN to router)
-Blu-Ray player

Point D powers
-Desktop PC (network via WiFi)
-speakers

Point E powers
-Cordless phone

Hopefully you can give me some suggestions on what I can use to reduce my equipment mortality rate >_<' I need to go kill Diablo and save the world !!!!

This post has been edited by gerald7: May 25 2012, 11:49 AM

Point A
Is there any telephone / ADSL Splitter Filter connected with those equipments?
How many wired lan cables connected to other PC / equipments from modem / router / switch?
Laser Printer & NAS connected via lan cable at Point A?

Point B
you can use SD-4C if consisted of power + lan protection only

Point C
your TV / satellite box connected to any aerial antenna or astro dish?

Point D
you can use MDSC0039 for power protection only

Point E
you can use SF9512ARD, but i recommended to get SF9812ARD + spare SKPXARD if ur DECT phone always damaged by lightning

Other question:
Is it all the equipment of Point A-E located in the same room? If no, which equipments located at different location?

basically POINT refers to 1 power outlet/line... probably should have described it better..

Point A
Is there any telephone / ADSL Splitter Filter connected with those equipments?
- Nope. Directly wired. Should use? I have.... didnt see much difference in using...

How many wired lan cables connected to other PC / equipments from modem / router / switch?
- Switch connects, 1 PC & satellite box
- Router connects, the switch, the modem and the NAS

Laser Printer & NAS connected via lan cable at Point A?
-laser printer connect to PC @ point B via USB. NAS connects to router via LAN. I can set the laser printer to connect to NAS for printing if need....

Point B
you can use SD-4C if consisted of power + lan protection only

Point C
your TV / satellite box connected to any aerial antenna or astro dish?
-yes, satellite dish & aerial antenna

Point D
you can use MDSC0039 for power protection only

Point E
you can use SF9512ARD, but i recommended to get SF9812ARD + spare SKPXARD if ur DECT phone always damaged by lightning

Other question:
Is it all the equipment of Point A-E located in the same room? If no, which equipments located at different location?
No. Points A & B are in the same room. the rest in separate areas.

Tx for the fast response

This post has been edited by gerald7: May 25 2012, 12:26 PM

Here your propose setup... let me know if you insisted to split A & B into different group...


This post has been edited by gkl83: May 25 2012, 01:05 PM

Ok.. Hmm.. Im planning to rearrange my room also. Not so space effective at the moment... So merging points A & B should not be an issue.

Why is there a need to duplicate SLAN1236? Between point A&B + C? or is that an error?

1x SF9812DSL (79) 79
1x MDSC0039FC (63) 63
1x MDSC0039 (53) 53
2x SLAN1236 (39) 78
1x SF9812ARD (79) 79

So estimated around RM 352?

SF9812DSL / ARD is RM89...

for in case the surge come from lan cable itself, it will going BOTH direction to Point A&B and Point C
So both side need lan cable protection to avoid any damages...

Im actually located in East Malaysia. While courier is usually arrives in 24 hours. Im also interested in some spares... and any warranty ?

This post has been edited by gerald7: May 25 2012, 05:07 PM

limited lifetime warranty...
u can restore ur cal-lab unit with small cost around RM10-RM15 for whole life if send the damaged unit to HQ directly rather than purchase new unit after the expired of warranty...

Cool. I'll be going over to KL next thurdays. Staying around BU8, PJ area. Can we set up a time to COD ?

hi, my pc area got a few switches,
1 cpu
1 monitor
1 printer
1 speaker
1 router

Can suggest which protector suit me?

is your router connected to any other PCs (beside ur PC)? connected more than 1 PC onto the same router?
is there any ADSL Splitter Filter or telephone nearby ur PC equipments?