QUOTE(CoffeeDude @ Aug 27 2013, 11:03 AM)
Recently my PS3 got 8002F1F9 error
It happened during firmware upgrading.
The PS3 prompted me to upgrade my firmware and so I did via the LAN cable.
The error message appeared halfway thru the upgrade and no matter how many times I restarted the PS3 or restart the upgrade the error message kept coming back like a bad nightmare.
I then went on the internet to find out about this error and found that it refers to a corrupted HDD.
I also learned about PS3's safe mode boot up and how to take out the HDD.
I reformated the HDD to FAT32 using my PC.
I also reformatted a USB stick to FAT32 and downloaded the latest firmware into it.
Booted up the PS3 in safe mode and chose "System update".
Finally my PS3 is alive again!!
Good for you coffee dude. Mine being struck with the same problem but cannot solve It happened during firmware upgrading.
The PS3 prompted me to upgrade my firmware and so I did via the LAN cable.
The error message appeared halfway thru the upgrade and no matter how many times I restarted the PS3 or restart the upgrade the error message kept coming back like a bad nightmare.
I then went on the internet to find out about this error and found that it refers to a corrupted HDD.
I also learned about PS3's safe mode boot up and how to take out the HDD.
I reformated the HDD to FAT32 using my PC.
I also reformatted a USB stick to FAT32 and downloaded the latest firmware into it.
Booted up the PS3 in safe mode and chose "System update".
Finally my PS3 is alive again!!
Need some help here.
Mine is a 320g MY set PS3 slim, update 4.46 through the PS3 internal processes. I leave it to update but was surprise to see the 8002F1F9 error message at 8X% progress .
Tried for 3 nights already, most of the time it will stuck around 8X% but once it did stuck at 99% which I thought sudah ok but it end up with the same error message
Among the approach I tried:
1. Boot into recovery mode but it will still directly goes to the Update screen and stuck at 8X% again. (~ 10 attempts)
2. Swap with another 2.5 120GB HDD from another PS3, it will boot into safe mode but PS3 says I do not have the correct firmware (4.31 or above). (2 attempts)
3.1 I formatted my 2.5 120GB HDD to FAT32 using
3.2 Prepared another external harddisk with FAT32 and put the downloaded 4.46 Update file (PS3UPDAT.PUP) in \PS3\Update\ folder.
3.3 I boot up and press Select and Start 5 second according to on screen instruction to format my 120GB HDD in PS3.
3.4 reboot of PS3, and I am being prompt with the user agreement for updating the firmware and have to choose agree, then the update System Firmware starts again.
3.5 This time, the update process failed at 40%
The thing I not yet / not dare to try:
1. Format the 320GB hard disk to FAT32 and try to update using the external hard disk.
2. Open up and swap parts with another PS3 I have.
3. Send to sony centre
Any suggestion from the forumers?
This post has been edited by kygoo: Sep 13 2013, 02:41 PM
Sep 6 2013, 10:51 AM

Quote
0.0356sec
0.34
6 queries
GZIP Disabled