better don't be too smart by choosing your own oil,

you may void your warranty by using non proton cvt oil

cvt is a sensitive transmission, and very expensive to be replaced

Too far from my place==

---

Added on December 28, 2012, 7:23 pmYalo, SA himself also dunno proton car got ecu or not

---

Added on December 28, 2012, 7:25 pmBro～u haven't tell us any improvement after update, which SC you go?

---

Added on December 28, 2012, 7:27 pmBro～u haven't tell us any improvement after update, which SC you go?

This post has been edited by haur516: Dec 28 2012, 07:27 PM

Went to CoSE.

Improvement/Fixed: no more semput2 during idling.

Btw,

salam sejahtera semua..
*info dari pihak pengurusan PROTON. Bagi sesiapa Pemilik Proton Saga FL/FLX/SE/ yg mempunyai masalah brek belakang terutama ABS dan mengalami masalah brek berbunyi ketika membrek dan jawapan bagi permasalahan tersebut pihak proton sedia menukar BREK DRUM baru yg bersaiz lebih besar berbanding sekarang. Dan sebarang ketukan pada penahan brek tidak lagi diperlukan. hanya tukar kepada brek drum yang baru. setiap branch servis proton telah mendapat memo tentang masalah tersebut. So bagi yang ingin membuat penukaran haruslah membuat pertanyaan terlebih dahulu kepada pihak branch servis proton kawasan anda bagi memudahkan mendapatkan stok brek drum tersebut dan tertakluk pada terma dan syarat.. sebarang pertanyaan boleh ke setiap Servis Centre yang berdaftar. sekian

=copy & paste=

This is getting sarcastic until it's a bit insulting.

my SA didn't mention the exact function of it, on the receipt the item is - seal assy, hood front no 2 (blm)
mybe to improve intake flow or simply blocking dirt cause i already put rubber seal on headlamp and whole grille except near intake, but later found out it's ok to block it anyway

i've been using 2 weeks since the update, as others hv mentioned no more 'semput' issue when idling
crawling traffic jerking mostly gone earlier on update, but now seems to hv, but not as bad as before
i think it's almost the same as preve ecu update.. seems like they change 'D' to use 'L' setting

when i ask for update, the sa asked me if there's any problem b4, in the receipt only said -to update software. no mention of ecu or tcu

This post has been edited by blau-saga: Dec 28 2012, 08:27 PM

Sarcastic? true story bro

Hi...
Can post a pic or 2...? To show wat that seal looks like & where...
TQVM in adv.

---

Added on December 28, 2012, 8:49 pmps. Am wondering if it's of any benefit 2BLMs/FLs? An improvement...?

This post has been edited by zeone: Dec 28 2012, 08:50 PM

hi, i've been a silent reader to this forum since i bought my flx in 2011 august.

here's the photo, not my car.

red = claimed foc item. almost like big-d seal
yellow = my own seal (small-d)


btw, i also hv big-d rubber on the front edge of hood for better seal including between headlamp and hood

if seal whole gap of course la cleaner engine bay, if only the intake don't know

This post has been edited by blau-saga: Dec 28 2012, 08:58 PM

ah huat? no way...
because not tasty only ask lembu come out promote
me old town fag, lols~
p/s: when having promo rm11.99 only will buy

---

Added on December 28, 2012, 9:14 pmwish you luck to get 10ppl

This post has been edited by GP mad man: Dec 28 2012, 09:14 PM

the wash and wax one 5 ppl... the usual plan one 10 ppl la...

eat the reply i gave above... good luck to get 10 ppl la... bila u mau join ? ISH !

So now ade how many?

according to the list now... 1...

I tot r3apers and gajah also doing....u leh?

then 3 lor... i now seriously no budget... the dunlop now really licin licin adi... hahahaha !!!

Tks a meg, Bro! For the pic c/w added illustration re seals.

Is the function juz 2keep out dust?
Did SC ppl tell yu why...?( Apologies...yu oledi answered that in a later post... )

Kinda like blocking airflow...hotter engine compartment?
If seal blocks intake, it'd b like hot-air intake rather than CAI...thereby defeating purpose of putting intake with ducting there in first place, agreed?

Cld yu pls clarify why yu added the big-D rubber seal @yellow-marked locations as well as H/lamps area?
TQ in adv!

This post has been edited by zeone: Dec 28 2012, 09:50 PM

Change already lor

Merz Wax and Wash Bulk

1. dares
2. r3apers
3. Sang Gajah
4.
5.

YAB tak mau meh?

btw, push push push~
to 10ppl...

belum change... hahahaha !! u organize the bulk for me can arh ? done adi u just sms me when u all want to do... cause i will be busy tmr...

at first i thought it the hood cover, so no further question
later found out only that small rubber.. haha

initially i only cover front between bonnet and headlamp/grille except the air intake part
i've search and asked people and my conclusion is the air should be coming from grille upward into the intake, if we assume the intake does suck air
the gap on our saga jz too big compared to other makes or persona for example.

and if the gap does function shouldn't it be big enough to suck more air?

also the engine bay is quite dirty cause water and dust easily came into engine compartment thru the gap



This post has been edited by blau-saga: Dec 28 2012, 10:05 PM

Many tks, Bro! For yr explanation...
Yup, logically appears that cld b the reason...
With our windy & rainy weather...plus our dusty environment!!
Water (& dust,etc) cld b sucked directly in2 intake mouth @that location...

ps. Might b a good idea 2add those Big-D/Small-D seals...4those BLMs/FLs which don't come with the seals...even certain FLX batches?

This post has been edited by zeone: Dec 28 2012, 10:00 PM