Must plug it directly to the PC

---

Added on October 9, 2012, 8:39 pmLatest Dashboard added and E367 firmware section added

This post has been edited by blacktubi: Oct 9 2012, 08:39 PM

i guess E367 after tweak , performances is even better

Those of you guys that have the maxis branded E372 can unlock and reflash it to the latest FW jor

Amazing
+1 on the stability, the signal consistency is

blacktubi I've E367 and thinking to try your tweak, just want to ask that how did u open the E367 casing? Also do I need a router to get better performance?

normally, i cannot get this using my E372 raw plug in USB port, but with this latest FW+dashboard+special DNS, i get this freaking low PING

Huawei modem is very quality, it is very tight there and very hard to be opened.
Unscrew the screw and use your nails or maybe guitar pick


Congratulation

special DNS ?

how do u power up the server fan? separate PSU?

I cant even any screw at all on the modem, also plz answer to me about the router question, thkz.

It is hidden under a white sticker

Note:Once sticker broken > Warranty voided

Not necessary, but a router will supply the enough power for the modem

Cant find any sticker as well, I only see some very small holes somewhere around the place that u put the sim card.

my server fan been modify to connect to a 1.0A power plug adapter

---

Added on October 9, 2012, 9:43 pmif your modem is not that HOT, best leave it as it is and just add a fan blowing will be fine

This post has been edited by chuahcs79: Oct 9 2012, 09:43 PM

As what chuah mentioned, don't open it, it's hard if you don't have a mighty hand

That's the hole just below the SIM Card slot, very small (0.3MM)

---

Added on October 9, 2012, 9:57 pmAs what chuah mentioned, don't open it, it's hard if you don't have a mighty hand

That's the hole just below the SIM Card slot, very small (0.3MM)

This post has been edited by blacktubi: Oct 9 2012, 09:57 PM

Ok I'll try it with a fan 1st and see how, then will decide whether want to open it or not, thanks guys.

result of Option Icon 505 modem with QPST


[attachmentid=3092635]

Thanks for that Sifu Chuah
Added on first page

im using e367.. after update firmware.. why i cannot browse internet... if i connect to my router still can connect to internet...


result after update firmware - i think more worse in term of consistency.... how can i revert to original firmware?

I also install qpst software.. tune power 23 to 26... - result still the same... (maybe its peak hour rite now)...



Attached thumbnail(s)

it dont have to be 26, it can be someties 24, or 25 in TX,..

from screenshot u post, u are log on WCDMA, u need HSDPA, HSPA , HSPA+ or DC-HSPA+ in dashboard in order for getting faster internet WCDMA sometimes zero response in data traffic


u need to try tweak in between 24, 25 too

This post has been edited by chuahcs79: Oct 9 2012, 10:51 PM

Blacktubi,

i just test, same value tweak on Maxis set E372 and Huawei set E372

both no different at all, the only thing can make different is what IP u getting

[attachmentid=3092729]