Outline ·
[ Standard ] ·
Linear+
Maxis OpenWRT for TP-Link 1043ND v1.8+ on Maxis FTTH, Custom Router for Maxis FTTH
|
TSsayboon
|
 Sep 6 2012, 09:55 PM
|
New Member
|
QUOTE(blade63 @ Sep 6 2012, 10:37 AM) Apology first as I quite noob in this matters. For clarification...If I buy the latest V1.9 of the TP-LINK 1043 then I need to do the following steps. Steps : 1. FLASH as suggested by Benlye 2. Flash the german version 3. Flash Open wrt (FACTORY) 4. Finally TP LINK upgrade. please confirm and thanks Hi, The steps I've described above is what has worked for me for this model and versions 1.8 and 1.9. So if you followed the instructions above you should be fine. What benlye said needn't be done was that you don't need to flash with OpenWRT factory firmware but directly to the sys upgrade firmeware after you have restored it to the original German TP Link firmware. Hope that clears it up for you. |
|
|
|
|
|
blade63
|
Sep 7 2012, 03:15 PM
|
New Member
|
QUOTE(sayboon @ Sep 6 2012, 09:55 PM) Hi, The steps I've described above is what has worked for me for this model and versions 1.8 and 1.9. So if you followed the instructions above you should be fine. What benlye said needn't be done was that you don't need to flash with OpenWRT factory firmware but directly to the sys upgrade firmeware after you have restored it to the original German TP Link firmware. Hope that clears it up for you. OK will try as per your steps. Thank you very much for all the efforts. cheers |
|
|
|
|
|
TSsayboon
|
Sep 7 2012, 06:14 PM
|
New Member
|
QUOTE(blade63 @ Sep 7 2012, 03:15 PM) OK will try as per your steps. Thank you very much for all the efforts. cheers Sure no prob, do let me know how it goes at the end. |
|
|
|
|
|
benlye
|
Sep 8 2012, 04:57 PM
|
|
|
QUOTE(blade63 @ Sep 6 2012, 10:37 AM) Apology first as I quite noob in this matters. For clarification...If I buy the latest V1.9 of the TP-LINK 1043 then I need to do the following steps. Steps : 1. FLASH as suggested by Benlye 2. Flash the german version 3. Flash Open wrt (FACTORY) 4. Finally TP LINK upgrade. please confirm and thanks You don't need to do step 1 if you haven't flashed it to OpenWRT. Just go with step 2 n 3. Step 4 is not needed as the FACTORY firmware is already the latest. step 1 is only required if your router is already in OpenWRT |
|
|
|
|
|
totally_skint
|
Sep 8 2012, 10:50 PM
|
|
|
How do I go from DD-WRT to Openwrt?
|
|
|
|
|
|
TSsayboon
|
Sep 13 2012, 10:58 AM
|
New Member
|
QUOTE(totally_skint @ Sep 8 2012, 10:50 PM) How do I go from DD-WRT to Openwrt? There is actually a specific file which you need to use for DDWRT to flash it back to the TP-Link firmware. Let me try to see if I still have that file later when I'm home. |
|
|
|
|
|
totally_skint
|
Sep 14 2012, 09:50 AM
|
|
|
QUOTE(sayboon @ Sep 13 2012, 10:58 AM) There is actually a specific file which you need to use for DDWRT to flash it back to the TP-Link firmware. Let me try to see if I still have that file later when I'm home. I got the revert file off klseet's site. Thanks. |
|
|
|
|
|
debbierowe
|
Sep 14 2012, 09:33 PM
|
|
|
maxis only? unifi can?
|
|
|
|
|
|
TSsayboon
|
Sep 14 2012, 09:41 PM
|
New Member
|
QUOTE(debbierowe @ Sep 14 2012, 09:33 PM) Yeap can. For UniFi, it's quite straight forward, just refer to KLSeet's page. |
|
|
|
|
|
yunodie
|
Jan 1 2013, 02:00 PM
|
|
|
hi after i flashed it to the german version, i cant get to the openwrt web UI (as shown in screenshot in Page 1). Am i supposed to flash the second file in the TP Link environment or in OpenWRT environment?
tried to manually type //192.168.1.1/cgi-bin/luci but still couldnt get to the page as shown in screenshot. dont dare to flash it from tplink german version who knows it might brick it?
appreciate your help tq~!
|
|
|
|
|
|
gahkin
|
Jan 16 2013, 02:21 PM
|
|
|
anyone was success flash the openwrt with tplink wr1043nd v.1.10? i just follow by the another suggest way was make my router to become bricked after it.. anyone idea?
|
|
|
|
|
|
jianwei87
|
Jan 16 2013, 02:53 PM
|
|
|
How about the SIP? Will the phone still working?
|
|
|
|
|
|
pisanq
|
Jan 16 2013, 04:23 PM
|
|
|
QUOTE(chingloong83 @ Aug 31 2012, 01:53 PM) * but i figure out when the thomson router up time near 48 hour it will disconnect. or the thomson router data transferd reach 20GB/20GB it will disconnect. the disconnection also will happen near 48 hour or the total data send and received near 40GB in 2 days. i was try 4 user watch pps and youtube in for 2 days. the disconnection happen during it reach its data capacity limited actually Maxis HOME Fiber DHCP leased IP address will be expired every 48 hours that cause your internet connection disconnected every 2 days |
|
|
|
|
|
bsa12
|
Jan 16 2013, 04:30 PM
|
|
|
QUOTE(jianwei87 @ Jan 16 2013, 02:53 PM) How about the SIP? Will the phone still working? I tried it just now. Got my Nexus 7 working on SIP. |
|
|
|
|
|
pisanq
|
Jan 16 2013, 04:32 PM
|
|
|
QUOTE(bsa12 @ Jan 16 2013, 04:30 PM) I tried it just now. Got my Nexus 7 working on SIP. i believe jianwei87 asking about the VoIP service using the stock hardware phone coming bundle with this Maxis HOME Fiber package, not the softphone.. |
|
|
|
|
|
bsa12
|
Jan 16 2013, 04:39 PM
|
|
|
QUOTE(pisanq @ Jan 16 2013, 04:32 PM) i believe jianwei87 asking about the VoIP service using the stock hardware phone coming bundle with this Maxis HOME Fiber package, not the softphone.. stock network phone aslo working fine |
|
|
|
|
|
jianwei87
|
Jan 16 2013, 05:45 PM
|
|
|
QUOTE(pisanq @ Jan 16 2013, 04:32 PM) i believe jianwei87 asking about the VoIP service using the stock hardware phone coming bundle with this Maxis HOME Fiber package, not the softphone.. Ya, that what I need to ask. And how to flash my Linksys E3000 to OpenWRT? |
|
|
|
|
|
pisanq
|
Jan 16 2013, 05:52 PM
|
|
|
QUOTE(bsa12 @ Jan 16 2013, 04:39 PM) stock network phone aslo working fine how you connect the stock phone to TP-Link 1043ND while it don't have the phone port? |
|
|
|
|
|
gahkin
|
Jan 16 2013, 08:52 PM
|
|
|
who can help ? my router to be brick after i flash to openwrt .. cannot ping 192.168.1.1 at all, i was success flash to german tplink.. anyone can help ?
|
|
|
|
|
|
yunodie
|
Jan 16 2013, 10:16 PM
|
|
|
QUOTE(gahkin @ Jan 16 2013, 08:52 PM) who can help ? my router to be brick after i flash to openwrt .. cannot ping 192.168.1.1 at all, i was success flash to german tplink.. anyone can help ? I bricked mine too. You have to go to OpenWrt to learn about how to flash V10. The instructions in this thread is for hardware v8. |
|
|
|
|
Quote
0.0305sec
0.42
6 queries
GZIP Disabled