Looks great. maybe i should give it a try

Update
--------

DONE!!!!!!!!! It is working

I'd like to highlight for those that have already on OpenWRT you will need to 1st flash it back to this firmware 1st http://www.tp-link.com.my/resources/softwa...82817292310.zip

before flashing it to the German firmware.

This link will confirm what i say http://wiki.openwrt.org/toh/tp-link/tl-wr1...iginal.firmware

because the German firmware contains the boot loader which will brick the device if you flash it from OpenWRT to prevent it you have to use one firmware with out the word 'Boot' on the filename

This post has been edited by benlye: Aug 25 2012, 10:18 AM

here

But before you go there..

since u've done this method. you can use port 1, which is the wan port

for the 3rd imaged.. (meaning the 1st openwrt image)

under Vlan ID 1
port 2,3, 4,5 select untagged
port 1 select off

Under Vlan ID11
port 1 select tagged
port 5 select off



This post has been edited by benlye: Aug 30 2012, 06:09 PM

You don't need to do step 1 if you haven't flashed it to OpenWRT.
Just go with step 2 n 3.

Step 4 is not needed as the FACTORY firmware is already the latest.

step 1 is only required if your router is already in OpenWRT