temps on GC looks okayh.. certainly better compared to those on air haha..
all cooled by 480.. impressive

eh not really

from what i know with RRR ppl etc
they all said gc watercool try not to exceed 70
and even worse when ure running acrylic top full cover gc's.. this part something to do with the washers

VF3000a vs Arctic Cooling TTP


Kgo.

Been looking for top motor open casing with watercool capabilities...anyone know where can find?

a rather good finding

http://www.overclock.net/water-cooling/712...tx-480-sli.html

dont think so
rather misguided

its not like somebody here going to spend a lot of money to cool their cards with a single pass rad. with low rpm fans

The MCW-60 is a good block and tends to cool the GPU very well, no doubt and has been proven. The problem would be to cool those RAM, mosfets, etc on the card which are running really hot. RAM sinks would help but to a certain extent hence people these days prefer to go for a full covered block. If you have some of those cheaper cards where there's no full covered block, the MCW-60 would be good to do the job

my design this air better water, 34 deg only with 5970

By sammmmmas at 2010-06-08


By sammmmmas at 2010-06-08

---

Added on June 9, 2010, 2:45 pm
By sammmmmas at 2010-06-08

---

Added on June 9, 2010, 2:48 pmnormal in 34 ~ 38 , 30% fan speed
gaming times in 48 ~ 51 , 40% fan speed


This post has been edited by sammmmm: Jun 9 2010, 02:48 PM

hey bro, can u plz run furmark?

This post has been edited by metsatsu: Jun 13 2010, 07:31 PM

How if the aircond is down? What is the temperature when operates without the aircond running?

i already seach for 5970 watercooler heat at lowyat plazat,
but nobody sell

---

Added on June 15, 2010, 7:50 pmdownloading 3d vantage
post test result later

This post has been edited by sammmmm: Jun 15 2010, 07:50 PM

U might interested with the g.p.u. waterblocks frm few forumers here? I would say eventhough pricey and risky (leakage), but watercooled g.p.u. is more queite and the best thing is higher efficiency.

U might wanna take a look here and here

can u guys recommend any vga cooler 4 my palit 9600??

my casing is pretty small.. so heat build up easily..

tq

Sounds very hot, sweating here....

What temperature U talking abt?

in noon my gpu can go 2 60..

sometime even when in idle it will go 60..

really worried.. i really sayang my palit huhu

60C in the aircond room? idle or loaded?

My PC is in non-air-conditioned living room and when loaded it goes more than 70C with the fan running at 75% fan speed (if I'm not mistaken, it should be 75%), tht was with stock HSF, and at the mentioned fan speed, it's kindda noisy too.

idle lah..

im non-aircond.. kipas2 ma..

urs can go how high when loaded???

mine noisy too...

Mine is the GTX295

It was able to reach temparature of more than 70C to 80C with the stock HSF running at 70% to 80% of full speed, can't remember the exact figure, but it's somewhere at the given figure.

I've changed to liquid cooled, not more than 50C when loaded (no overclock) in non-aircond living room.

Changed from CM 90CFM to Scythe SlipStream 110CFM x 8



Temp improved by 7-8C, now i7 920 @ 4.56Ghz 1.4v