so if aesthetic wise is not a concern, which 1 would U recommend? Hey guess vat, I'm using only the i"asingComel" c for a liquid cooling setup, if aesthetic is part of the concern, I would have already choosen at least Tt casing.

But the above is applies only for my 2ndary rig.

Any comment in terms of performance?

Most of the graphic blocks r kindda ex leh, cost almost the price of a graphic card n some even more ex than the graphic card itself, walaueh, vat kindda market Vr in huh , imaging MYR700 ++ for a gpu block, again

Since most of the gpus nowadays genarate higher heat than cpu, does any1 think tht V should put gpu as the 1st priority cooling instead of cpu?

This post has been edited by J1@l_ l_l l\l: Jan 27 2010, 01:37 PM

dual chip gpu waterblocks are always expensive.. infact, watercooling will look the best if u spend a lot of $$ on it
heatkiller always make good waterblocks, so i dont think u need to worry that much in terms of performance

anyway whats an i"asingComel" case o.O?and in what form, tower, midtower?? and what other water cooling setup u building?

This post has been edited by reiben05: Jan 27 2010, 02:42 PM

Sorry mate, it's my typo error, I was trying to tell U i"comel" casing, U know it don't U?

Btw, is look so important when comes to liquid cooling, since I noticed tht aesthetic is part of priority concerns for many rig tuners eg. UV reactive coolant, LED fan, LED waterblock, n so on n so on, r these really practical?

that depends my friend.. it really depends.. u can buy all of these expensive stuffs.. but in the end look ugly.. u need to know what to choose and match it all with ur rig

arctic cooling also have called 'accelero L2 pro' for ATI Radeon HD 5870,5850,5770*,5750*

theres a non-reference 5870 now..

msi lightning 5870..
gigabyte super oc 5870..

i'd prefer the Msi 5870 since the cooler look so much sexier compare to the gigabyte.. dont know how's the temps thou..

This post has been edited by reiben05: Feb 16 2010, 04:00 PM

Is there any aftermarket cooler for HD4870 VRM chip? Change my cooler to Accelero Twin Turbo Pro and the VRM chip was very hot when gaming

How hot is very got? More than 90 degree C?

U might wanna try liquid-cool it, high efficiency yet more quite than the stock cooler.

What are the temps before/after you install the Twin Turbo Pro? Does it hang during gaming or it's just the number which is bothering you?

I'm not going to change to liquid for just the VGA card . If i was, i'm going to change CPU + VGA with liquid cooling

You could say that the number bothering me , the VDDC from original heatsink seems good and it's less than 90'c from Furmark while Twin Turbo Pro shown 130'c

The core temp' really improve with Twin Turbo Pro but not the VDDC , why they make use or small ramsink for VDDC

That's odd because the rest did not report such problems. Did you use back the original front mount plate from the stock cooler before installing the Twin Turbo Pro? You would need it because the original mount plate have thermal pads and can cool the VRM more efficiently.

No can do, the heatpipes can't fit properly with the original plate on it.

Yes i know what you trying to say, use back original cooling plate + Twin Turbo [Normal] method. But Twin Turbo and Twin Turbo Pro heatpipes position is different

Anyone knows a complete set of 5970 crossfire's WC would cost how much?

wow..u might have a super rig..

hows d temp overall?

been reading this n its quite disturbing...dunno whether to believe it or not

2x MSI GTX480 SLI in wc action, cooled by EK FC-480GTX (Nickel+Acetal) @880/4400/1670Mhz, 1.163v

Idle:


Load:


* ambient: 34C, OCed i7 920 @4.4Ghz in the same loop

wut is ur loop consist of?

Anyone know anything about the vf3000a noise level? And how is it when compared to Arctic cooling ttp

Pls refer to my siggy

owikh ure dangerously near 70 for gc on water

J1@/// etc
vlad has stock now one unit left ek gtx295 dual pcb waterblock

with his pricing.. definitely cheaper than u getting this from anywhere