looks like nearer to raya, sc full with servicing.

perhaps i better wait after raya, to get those minor problem solved.

no need la.. ODO meter can detect your battery and also my VS will do the job also.

ytd around 7pm...park at office car park....maybe whole day is a cold day...when start car....it gv me a kreeeekkkkkkkkk sound...

after sucessful start....i wait for a few second...then turn off the engine and start again....this time the rpm went up to 2k...try start a few times also like that...dont care...go home...

this morning...start car...want go to work...usually start car took about 2 to 3 seconds like that..today it took 5 to 6 seconds only succefully start...keep gek gek gek there there for 5 to 6 seconds...

do u press the brake until the engine finish starting?

Try to release the brake pedal after press start button...

i tried several times, if u immediately release brake pedal right after press "Start Engine"...the rpm will rev up to 2k...

No need to wait until finish starting, rite?

more accurately, wait until the engine finish revving...
u need to wait...

just 1 or 2 seconds...

I mean if we feel the car take more time to start, then release the brake... So the starter will stop moving...

huh... my case... if i press the brake hard hard only i can see rpm rev till almost 2k

I ask somebody to drive and I sit behind. The wind noise seems like come from the small window but possible from the door rubber. the 2 parts just few cm away only.

Normally I done this way... But yesterday due to starting time too long, the starter keep moving but not finish starting... I just released brake, it started with engine rev to 2k..

wah... just happend 30min ago at NSE from Sg Buluh to Rawang direction.

what happen? why 2 car terbalik one?

Do you mind to inform me once you fix it? Which proton service centre are you going?

u must go back SC fix it or u wanna DIY and solve it yourself?

my case is terbalik with urs....i tried 4-5 times ady....dun wan try anymore...dun wan engine rev up to 2k when i start my car...

---

Added on August 7, 2012, 2:06 pmnot sure about this, better take to SC check...

---

Added on August 7, 2012, 2:07 pmbro fulat, even after i put rubber, still got wind noise, guess the wind noise is at the back of the black triangle...T__T

This post has been edited by arthur88: Aug 7 2012, 02:07 PM

kakakak... so weird one... ok... i am testing something.. finally i have figure out my style of driving can make it to less than 10l/100km city drive...

---

Added on August 7, 2012, 2:11 pmyes... its at the back of the triangle there... u push it harder in side or use some silicon. it should work

This post has been edited by fulat: Aug 7 2012, 02:11 PM

yes...

last thing to check is that, do u wait for the electronic stuff finish diagnose/running?

if u done this, still got problem, then better go to SC...

---

Added on August 7, 2012, 2:20 pmout of topic...see this thread number at URL...
2454524

24=die of hunger
54=i die
524=i die of hunger

mandarin sound pronounciation...
all related to death...

This post has been edited by arthur88: Aug 7 2012, 02:20 PM

i used to use the 4 step to start car...then i change to 3 step...

then the 3 step cause the kreeekkkkk sound..

then i turn off...turn on again using 4 step cause it rev to 2k rpm...
this morning also use 4 step...then took it 5 sec to start the car...