erm.. i drove it today.. maybe i was imagining things. It's ok now. everything normal. haha

=.=.. i aso duno i got kena potong or not. lol..

change oil filter, engine oil, clean TB, and the air intake thingy, change spark plugs, refill anti rust coolant.

all for rm 130.


O.o.. different from my shift points. O.o i think i drive like aunty. lol..

g2@<15, g3@ 20-40, g4 @ 40-55 g5@ 60
lolx..

[quote=IvanWong1989,Aug 14 2012, 02:39 PM]
erm.. i drove it today.. maybe i was imagining things. It's ok now. everything normal. haha

=.=.. i aso duno i got kena potong or not. lol..

change oil filter, engine oil, clean TB, and the air intake thingy, change spark plugs, refill anti rust coolant.

all for rm 130.



what engine oil your car using? sounds like reasonable pricing

thats damn cheap man. he told u just to "clean" throttle body, or he say "reprogramme throttle body"?

cuz my workshop man tell me he will REPROGRAM it. just the service TB thing is already 100++
den change engine oil and normal service everything, total cost is 300 liddat. i think i'm the one kena potong

erm. castrol gtx 15w-40.. O.o

clean tb. lol. no reprogram.

i dun even know tb can program?? O.o

Change air filter to performance if engine stock basically u gain nothing at all... see mightycarmods air filter myth at utube.

from 12sec to 10sec 0-100 huhuhuhu that would need a massive mod if still wan to stick on NA.

---

Added on August 14, 2012, 7:21 pmconfirm kene potong edi.... T/body only can reset or VDO called relearn .... u cant improve power... it just set back to normal operating condition unless reflash or rechip. so far Wira i have no solution yet.

This post has been edited by mxsteven: Aug 14 2012, 07:21 PM

Hellllooo guys ~~~~ he he he ~

New member here . He He He

I owns a Wira 1.5gli efi vdo 4g15 .

he he he ~~~~~

But this car many problem 1................... pening .........

Can I know where do I find the extractor in my car? I scare previously my relative modded it but I Dono den go workshop give ppl potong again

Hi , guys . Just wanted to ask some question about wira carburetor 1.5 .
My dad's wira which is about 15+ , lately being giving problem . The car will choke or vibrate during idling , then the engine will die off , which after could not be started . The first time , we call AAM and the service guy came and tested , taken the air filter out and pour fuel into the cab while starting it , then only the it starts . He say no fuel coming from the pump something like that . Then the car will be fine but it happen again this evening . my dad did the same and it started again .

btw , fuel filter , and the pump changed after the first incident but still have this problem ..
so what u guys think is wrong .

extractor is the exhaust part where connected directly to your engine block... just in front of your engine.

Guys, anyone use Coil Spring Buffer?...will it make our ride higher?...any Cons if installed on old spring?...

i've recently change all 4 new absorber but using back my spring....My rear is stock and front is APM Sportec (i think, its purple color)...i wanted to raise the height abit more...Thinking of using Coil Spring Buffer instead of changing the spring...

I recently installed on my front... Don't feel any different, height and performance...

hmm okay,

i stand infront on my car, i open up my bonet, and there's my engine in the middle, the air filter box on the left. and the black oil steel rode thing is on the right of the engine.

so where is my extractor? is it north of the engine or south?

from what i see just now, i think it's south(towards me) of the engine, and abit at the bottom, not visible from top. is it correct?

ok...this is the photo of wira engine...the red circle is extractor...



the extractor is under the metal plate if im not wrong...



this is what they called 4-2-1 extractor...

hope this helps....

correct me if im wrong any other sifu

Didn't increase the height at all?...my intention is to raise the height a little bit..

Yup, did not increase at all... Kinda regret spending RM 50 for it... No different and very troublesome... Everytime jack up the car, need to slowly adjust it back... Thinking of uninstalling it, but very waste coz use less than 2 weeks...

---

Added on August 14, 2012, 11:23 pmYup, the picture no.1 is stock extractor coz the cover is still on... If the extractor has been change then usually the cover can't fit in...(example is like picture no.2)

This post has been edited by k3v_84: Aug 14 2012, 11:23 PM

Seems like i need to opt for new spring instead of coil spring buffer...>.<

Guys, if i use Heavy Duty Rear spring for my wira 1.3 A/B, will the height increase or the height will be the same but its stiffer?

wow thanks!

den mine should be stock. cuz still have cover on it.

Guess you are if you are VDO as like me.
where's your location ?

VDO, TB cleaning thing (spray some red colour detergent, brush, air dry) + plug in that handheld device, deleted some error code, if not mistaken, he charged me RM60. Cost RM60-RM80 in JB.


I guess RM300 for :
engine oil change including labour + point checking/ services (you can do at home lah) + TB cleaning
if only he give me branded (Shell, Mobil, Petronas, Havoline, Castrol, Idemitsu and etc) fully synthetic oil, also depends how trust-able that shop is, rumors are that some shops selling fake oil.

excuse me all.. erm. may i ask..
when u want to refuel, ya open the fuel cap right. is there suppose to be vacuum sound of air pshshhhhhhh? or not?

edit:

also, i dun get what is VDO or MMC...

seen the word alot in the forum.. but i noobie duno what it means. just curious. some say VDO bad? ym car's vdo

This post has been edited by IvanWong1989: Aug 15 2012, 08:33 PM

mine is semi synthetic one. 5000. dono what brand. forgot d.
Kepong area lo. KL. so maybe because the rental more expansive they charge more expansive?

by the way, whats VDO and how to check whether mine is VDO or not?

---

Added on August 15, 2012, 8:43 pmyes i have the "psssh" sound one. never bother it before cuz it doesnt explode.

and i also want to know whats VDO. and MMC? omg so many things to learn. sifu pls teach

This post has been edited by dont8cum: Aug 15 2012, 08:43 PM