Welcome Guest ( Log In | Register )

3 Pages  1 2 3 >Bottom

Outline · [ Standard ] · Linear+

> AMD Socket-754 Overclocking Database, Athlon64, Sempron, AMD Mobile CPU

views
     
TSjslut
post Jan 13 2006, 05:23 PM, updated 14y ago
Senior Member
2,236 posts

Joined: Jan 2003
From: KL




AMD Socket-754 Overclocking Database
for Athlon64, Mobile Athlon64, Sempron, Mobile Sempron & Turion64




Rules and requirements:
1. Only 1 post each for one system.
2. One single screenshot of SP2004/Prime95, two CPU-Z (each showing CPU and RAM properties) is required.
3. CPU stepping is a must! Check for your CPU stepping on top of your processor. Also include informations such as applied CPU voltage, cooling method
4. Include other necessary informations such as motherboard type, memory configuration.
5. Only results with at least 8 hours prime stable will be accepted. Set your SP2004/Prime95 to run custom test with 8-512K in-place FFT (for CPU with 512KB L2 cache) or 8-1024K in-place FFT (for CPU with 1MB L2 cache).
6. All of the requirements above are mandatory.


Tools:
SP2004 - http://sp2004.fre3.com/download.htm
CPU-Z - http://www.cpuid.com/cpuz.php

Lowyat.NET Socket-754 Rankings

01. xxxxx 0528 UPMW | Cyclone87 | 2715MHz | 1.45V | Sempron 2800+ E6 | AIR
02. LBBWE 0527 EPAW | soulfly | 2704MHz | 1.63V | Sempron 2800+ E6 | AIR
03. LBBWE 0527 UPMW | sidewinder | 2656MHz | 1.568V | Sempron 2800+ E6 | AIR
04. xxxxx xxxx xxxx | briangan | 2590MHz | 1.5V | Sempron 3000+ E3 | AIR
05. LBBWE 0532 TPMW | superpc | 2560MHz | 1.55V | Sempron 2800+ E6 | AIR
06. LBBWE 0539 BPBW | goldfries | 2501MHz | 1.5V | Sempron 2800+ E6 | AIR
07. LBBWE 0527 UPMW | low yat 82 | 2403MHz | 1.5V | Sempron 2800+ E6 | AIR
08. xxxxx xxxx xxxx | pukarix | 2400MHz | 1.568V | Athlon64 3000+ CG | AIR
09. xxxxx xxxx xxxx | superpc | 2277MHz | 1.45V | Sempron 2500+ E6 | AIR
10. xxxxx xxxx xxxx | termignoni | 2240MHz | 1.45V | Sempron 2500+ E6 | WATER

This post has been edited by goldfries: Feb 16 2008, 09:16 PM
soulfly
post Jan 20 2006, 07:52 PM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



CPU: AMD Sempron 2800+
STEPPING: LBBWE 0527 EPAW
SPEED: 2704MHz (338MHz x 8)
VOLTAGE APPLIED: 1.63V
COOLING: AIR

MOTHERBOARD: DFI LANParty UT nF3 250Gb
RAM: 512MBx1 OCZ EL Platinum Rev2 1.1
DIVIDER: 5/6
RAM TIMING: 2.5-4-3-10 @ 1T
RAM VOLTAGE: 2.8V

POWER SUPPLY: Enermax FMA EG465P-VE 460W
CPU COOLER: Thermalright XP-90 with Thermaltake UFO fan

user posted image
TSjslut
post Jan 20 2006, 08:23 PM

[email protected] [email protected]$[email protected]
*******
Senior Member
2,236 posts

Joined: Jan 2003
From: KL




so bro, do i need to put back the results or this would be a new one??
soulfly
post Jan 20 2006, 11:32 PM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



a new one ....

8 hours prime stable brows.gif
superpc
post Jan 21 2006, 09:32 AM

Owned by Doggies
*****
Senior Member
954 posts

Joined: Jul 2005
From: Anywhere!


lol mine one oso up
anyway they wil be new result soon brows.gif
soulfly
post Jan 21 2006, 11:19 AM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



don't forget your stepping ya.... i'll replace your old result with the new one.
sidewinderz
post Jan 22 2006, 10:21 PM

Long Live UV!!!
*******
Senior Member
3,966 posts

Joined: Jan 2003
From: Kuala Lumpur



mine....

user posted image

CPU: AMD Sempron 2800+
STEPPING: LBBWE 0527 UPMW
SPEED: 2600MHz (325MHz x 8)
VOLTAGE APPLIED: 1.575V
COOLING: AIR

MOTHERBOARD: DFI LANParty UT nF3 250Gb
RAM: 1Gb Infenion BE-6
DIVIDER: 3/2
RAM TIMING: 2.5-3-2-8 @ 1T
RAM VOLTAGE: 2.8V

POWER SUPPLY: Tt Butterfly PurePower 480W
CPU COOLER: Thermalright XP-90c with Thermaltake UFO fan
goldfries
post Jan 25 2006, 02:44 AM

40K Club
Group Icon
Forum Admin
44,372 posts

Joined: Jan 2003




CPU: AMD Sempron 2800+
STEPPING: LBBWE 0539 BPBW
SPEED: 2500MHz (312MHz x 8)
VOLTAGE APPLIED: 1.500V
COOLING: AIR

MOTHERBOARD: DFI Infinity NF4
RAM: 512MB KVR BT-D43
DIVIDER: /11
RAM TIMING: 3-4-4-11 @ i donno how many T
RAM VOLTAGE: 2.6V

POWER SUPPLY: Icute 450w
CPU COOLER: stock HSF

This post has been edited by goldfries: Jan 25 2006, 12:21 PM


Attached thumbnail(s)
Attached Image
lichyetan
post Jan 25 2006, 03:08 AM

*****
*******
Senior Member
2,293 posts

Joined: Jan 2005
From: Penang



Sister Rig Overclocked by me...
CPU: AMD Athlon64 3000++
STEPPING: refer to attachment image
SPEED: 2300MHz (242MHz x 9.5)
VOLTAGE APPLIED: 1.625V
COOLING: AIR

MOTHERBOARD: Abit KV8-Pro
RAM: 1024MB Corsair VS and Apacer
RAM TIMING:DDR333 [email protected]
VOLTAGE: Default

POWER SUPPLY: Cooler Master 450W ACLX
CPU COOLER: Cooler Master Hyper 6
smile.gif
But is my voltages to high, i only pass the prime using tis voltages, lower will fail...
maybe the model of tis amd64 is like tis... newcastle... blush.gif
sry for just prime 6 hours cause my sis wanna use her comp when prime was running, so swtiched the comp to default now...

This post has been edited by lichyetan: Jan 25 2006, 03:14 AM


Attached thumbnail(s)
Attached Image
soulfly
post Jan 25 2006, 11:10 AM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



lichyetan, the screenshot does not show any stepping info. cpu-z only shows the core revision, not the stepping.

the only way to read the stepping is by looking on top of the processor.
goldfries
post Jan 25 2006, 12:21 PM

40K Club
Group Icon
Forum Admin
44,372 posts

Joined: Jan 2003




yaw jslut, i've updated with stepping. kindly update. thx.
lichyetan
post Jan 25 2006, 11:33 PM

*****
*******
Senior Member
2,293 posts

Joined: Jan 2005
From: Penang



QUOTE(soulfly @ Jan 25 2006, 11:10 AM)
lichyetan, the screenshot does not show any stepping info. cpu-z only shows the core revision, not the stepping.

the only way to read the stepping is by looking on top of the processor.
*
sry guys, but it's my sis rig, lazy to take out the hyper 6 cause very hard to install the heatsink... btw felt very sry cause cannot post the stepping here...
soulfly
post Jan 26 2006, 12:17 AM

revving towards 10,000 rpm
Group Icon
VIP
15,894 posts

Joined: Jan 2003
From: Miri



err.... your sis knew that u oc her pc ka? sweat.gif
lichyetan
post Jan 27 2006, 01:45 PM

*****
*******
Senior Member
2,293 posts

Joined: Jan 2005
From: Penang



QUOTE(soulfly @ Jan 26 2006, 12:17 AM)
err.... your sis knew that u oc her pc ka? sweat.gif
*
knew already... but i reset it to default speed after finish prime...
superpc
post Jan 29 2006, 10:31 AM

Owned by Doggies
*****
Senior Member
954 posts

Joined: Jul 2005
From: Anywhere!


CPU: AMD Sempron 2800+
STEPPING: LBBWE 0532 TPMW
SPEED: 2560MHz (320MHz x 8)
VOLTAGE APPLIED: 1.55V(Bios Setting onli)
COOLING: AIR

MOTHERBOARD: DFI LANParty UT nF3 250Gb
RAM: TEAM Xtreem 1GB Infineon BT-5K
DIVIDER: 7/10
RAM TIMING: 2.5-3-2-5 @ 1T
RAM VOLTAGE: 2.9V

POWER SUPPLY: Acbel Full Power 400W
CPU COOLER: Thermaltake [email protected] speed

user posted image
superpc
post Jan 29 2006, 04:14 PM

Owned by Doggies
*****
Senior Member
954 posts

Joined: Jul 2005
From: Anywhere!


o bro soli i open two windows but forget to change one to memory section...can it be count oso?edi close the sp2004 windows so cannot take same screenshot for tat 8 hours again

goldfries
post Jan 29 2006, 09:19 PM

40K Club
Group Icon
Forum Admin
44,372 posts

Joined: Jan 2003




1st post never update already ah?
xpentor
post Jan 29 2006, 11:33 PM

New Member
*
Junior Member
7 posts

Joined: Sep 2005


All runnging at stock cooling,
As for the Apacer cheap ram, i raised its volt to v3.1 cool.gif
Attached Image
superpc
post Jan 31 2006, 08:10 PM

Owned by Doggies
*****
Senior Member
954 posts

Joined: Jul 2005
From: Anywhere!


jslut where r u?i see ur last active time oways update one le, nvr com here manage post?
goldfries
post Feb 8 2006, 01:21 AM

40K Club
Group Icon
Forum Admin
44,372 posts

Joined: Jan 2003




i don't get it. i see the list got updated by my report wasn't in there.

why is that so?

3 Pages  1 2 3 >Top
 

Change to:
| Lo-Fi Version
0.0248sec    1.19    6 queries    GZIP Disabled
Time is now: 22nd October 2021 - 02:26 PM