Inverter unit vs non-inverter unit.

Here you can ask Hybird car owner claim on petrol bill is higher than non Hybird car FC or not?
Even in town drove

Especially the main power supply from outdoor unit.

If already consealed for 1 way wire then good luck.

Non-inverter power indoor, so the wire will tap from indoor to outdoor only.

For inverter type indoor need to connected to outdoor and power supply from outdoor to indoor socket.

Unless outdoor had built in power socket for you.

Bingo

drill a wall only

Ya that is commons skills.

I had the same experience, end out like it.

In living look nice without anything


At the back inside my master bedroom.


For 1 way wire from IU = indoor unit, need to add new wire to power supply only, for that consealed wall just tap from IU to Outdoor only.

Option
If wanna install inverter also can, from ID tap to Outdoor only, for Outdoor wire just direct to power supply.
To be drill and tap from anywhere nearest to Outdoor compressor.

This post has been edited by kimsim: Oct 27 2013, 07:29 AM

Get York Cooling King
Higher BTU

BTU meant the capacity like horsepower for more higher BTU such as 9000 BTU for 1hp.

Quite simple and just like s'pore ban on R22 aircond unit, the new stocks all to be come with R410a gas, R22 to be runing in low stocks.

Once no more in stocks of R22 Aircon unit and who will try to hard push on R410a unit?

i would suggest you google them website and download for specs and check for the actual pipes size.

Ask Aircon man come to check gas n see wether there is gas pipes leakage, anyway ur Aircon won't be so fast died

What is your model?
Basic or cheaper model or condenser size too small unit?
Or facing direct sun area?

I got my experience from panasonic deluxe but 9k BTU non-inverter mode, there is keep longer time to cooling smaller room size 3x3x3m only, have to force used 2 fan speed and lower down temperature to 22C, for that unit itself really used much higher energy than inverter from 25C to 26C can be easily cold than non-inverter unit.

Anyone feedback here after you went from non to inverter unit for good reviews?

Thanks

like my friend he is Aircon installer base in s'pore.

For some customers may not change thier copper pipes at all, just reused the original copper pipe n used gas to flashing an existing oil out then to be used back.

Maybe in s'pore standard copper pipes will be more thicken for Kia Su Needed.

Actually in m'sia installer here if they used the same thickness for non-inverter n used in inverter unit do you check it out?
No right if never gas leak = good installation.

Can be try to used the concealed wall of original comes with devolpment one.

Workmanship unsure they can do as much perfectly done.

Good luck

Almost same, where got so easy spoil

So the price unknown as not common ppls who repair it

Pana you would regret lah, samsung more powerful

If like your case, can consider on york R410a non inverter save money and save energy too

14x22 = 2hp
13x14' = 1.5hp good enough

Like 14x22 installed bigger hp can be more efficient than smaller hp more suffer and taking longer for cooling down the room.

Pana still a Pana.

Daikin you pay for york.

Pana in thier selling point was econavi function, wanna too cold they can't guaranty you as what you excepted.

Noise wise still got slightly airflow like a window can't close as fit and drove over 120km/h in highway.

But latest model they will solve it, in thier specs had mention 23dba on thier specs already today.

York or Daikin is repackaged on york model, over my wife kampung usage when new is damn good, after once a services the blower fan coil would be some vibration noisy already, how to solve? Wanna change rubble bearing on left side of blower end.

Also york/Daikin is design non consumers can be self serving, due to thier drainpan can't remove, either you need to remove out whole blower fan coil for clean out internal.

Both for all are good.

So my point go for mitsubishi electric = ME in short form.
ME inverter slightly better for easy clean as well.

This post has been edited by kimsim: Dec 23 2014, 08:37 AM