If I have a router but without QoS, how do I limit the other PC bandwidth for example by installing some sort of software into their PC?

You can use NetLimiter. Version 1.3 better for limiting bandwidth, version 2.x bloated with junk.

NetLimiter can limit bandwidth on other computer??

how about the new multi-user version(3.91 beta) of cFosSpeed?
Prioritising programs and protocol, also can set maximum tx/rx speed on each computer.
http://www.cfos.de/beta/
http://www.cfos.de/traffic_shaping/ts_options_e.htm
Install on each computer and set it to "variable bandwidth with cooperation" mode.

This post has been edited by ming86: May 19 2007, 11:06 PM

anyone know any programme like grabsun netsense that when u install on your computer u can limit other users sharing connection without installing anything on their computer?

im using aztech600E...
can someone help us to configure Qos step by step...tq...

Anyone know how to block ares / limewire?

does anyone know how what software to use to see how many computers are using the network.

one more thing, can i control all others computer with my computer (one computer control all computer)-(limit bandwith) with the software installed in MY COMputer only ?

how to use netlimet?
i installed but cant connect to server...

i think most of the questions are still not answered

yes indeed............

i have used grabsun netsense and IMO its the best software to control other ppls bandwidth on ur computer without even having to go to their computer to install it

but it is a shareware.
i wana purchase it but it is in chinese
so i cant help much but to recommend it like a few pages back ppl have recommended me

i couldn't find any of third party which is compatible to my wrt54g ver7

how come this topic never got sifu come out and teach QoS on Aztech 600E?

im using look@lan can search and see the ip, it free.

Im using the router that had QOS.. but i duno how to set..

Seem many ppl confuse about wat the p2p has done to thier router , actually the problem is nop come from bandwidth. U may wonder y even i dl with bitcomet juz using 30kb/s but my router aslo cannot browse web and even hang up , izit the max bandwidth of ur ISP juz can go for 30kb/s , hv a think .

The problem is because of NAT table in router , when we open p2p software , each connection that we had connect to other peer will eat 1 slot of NAT table(connection include with the peer that u cannot dl from them ) , normally router juz support up to 1028 slot in NAT table(but the router is set to 100<slot<500 default factory) , when the NAT table is full , then we cannot do anything else

Ex of NAT table

Slot------------ip-------------------port----------------OutgoinIP---------------WAN
1---------192.168.1.2-----------50001----------202.123.123.44--------60.xx.xxx.xx
2---------192.168.1.2------------80-------------202.123.344.55--------60.xx.xxx.xx
.--------------.---------------------.------------------------.----------------------.------
.--------------.---------------------.------------------------.----------------------.------
.--------------.---------------------.------------------------.----------------------.------
.--------------.---------------------.------------------------.----------------------.------
1028-------192.168.1.3-----------65000---------60.123.123.123--------60.xx.xxx.x

*192.168.1.2 or 192.168.1.3 is the device that connect to the router ( u or ur fren pc)
*Port 50001 is example of port from bitcomet
*Port 80 is Http port , need for browse
*OutgoinIP is U get connect from who (peer or server)
*WAN is Ur ISP

When u fill up until 1028 slot then ur router will goin to block all other connection mean ur dl will keep with certain peer only (that y ur dl y keep so slow) , then u cannot browse because the slot had fill up with the BT ( that u call hang , u will realise y my connection of router , modem to ISP is on but i cannot browse?). Or even BT down to 0 dl with critical problem of NAT.

So bandwidth management juz can done by if ur router is beyond the NAT but 100% , NAT problem will come b4 bandwidth .
Mb u shd use sevice block like block the certain ip add with the port number start wiv 1000 untill 65534(coz normally ppl wont use port number under 1000 right? and the max port range is 65534) . Then it can prevent them make connection to port and peer mean ur NAT table slot is free to u only HAHAHAHAHAHA

If u wan to know more try the article i post here . I dint read the article but it is to proof wat i am saying .
 p2pnat.pdf ( 880.76k ) Number of downloads: 296
 CMU_ISRI_05_104.pdf ( 180.29k ) Number of downloads: 203


*So far i know that DD-WRT or other 3rd party firmware support up to 4k NAT slot , mb it will solve ur problem or mb nop ( depend ur p2p connection )

This post has been edited by chiafoo: Jul 31 2007, 06:42 PM

Good,its a very good explanation,easy to understand.Thx dude !

I got same problem where my friend hogging the bandwidth using p2p software and at the same time he open bittorrent client. I found it quite unfair to me since im the one who pay for the line and even i ask him to pay halves of the rent, im still at disadvantages.

I'm using D-link DSL-2540T adsl router, is there any way or step by step how to limit the bandwidth to my friend's pc?

Thx

any new solution
i wan play fifa !! house mate dl ><

when u wan to play game , close their port range from 1000-65XXX , normally this service is at access restrictions
of ur router.
If u wan manage the bandwidth pls make sure ur NAT table wont full b4 u set up bandwidth , if u set up bandwidth while ur NAT table full then it wont work , normally when ur router hang mean ur NAT table full . The most effective way is block their port range

how to block?
sorry noob here

---

Added on September 6, 2007, 10:19 amthen when after play unblock?
blockin = no bitcomet connection or all p2p blocked?
if all p2p blocked how to play game ?

This post has been edited by mzhai: Sep 6 2007, 10:19 AM