That picture is Penang punya Bukit Tinggi.

haha.. nvrmind la..
btw.. lately my bike really no good..
also dancing when ride on white line..
whats prob eh?
mono? handle? tyre?

itu teluk bahang photo is the most syok corner... lol.... 2nd photo most u-turn wan.. hahhhh

My bike also dancing... I just ignore it.. What i can think of is Tyre, Rim, Mono and Swing arms. Haiz bike accident before sure like that d. I ask my foreman see what wrong with it. Than only let u know

---

Added on April 18, 2012, 2:47 amThat is some of the picture i found in the old LYN thread... Miss the old thread. That how my bike started from sketch...

This post has been edited by TryX: Apr 18 2012, 02:48 AM

my uncle say this is because of tyre , michelin is most cause of it ...

Standard 2t tank for all the bike. Engine inspection for my MSS Kawa Cup bike back then, every 10K mileage, rebuild, none (well at least none before I start modifying the bike). Area below the piston ring are clean with no scratch or burn or anything. Engine inspection/rebuild for current bike, none, just regular service.

---

Added on April 18, 2012, 8:40 amNo ler, my ex ZX150 are my daily ride, to and from college and weekend Bukit Tinggi/track day. Long distance also.

This post has been edited by EyraYus: Apr 18 2012, 08:40 AM

Yus, want to ask if i doesn't want to take brand new kips...which generation kips should i take?? And PDK block gold color size is same with normal kips block? Why can had more hp if use pdk block?

@shyan: google up "ZSR Cyclone". This will answer your question. Need exhaust and CDI to reach that HP.

This post has been edited by alexei: May 8 2012, 03:22 PM

Reed valve ... Xsilap kena tukar juga kalau nak nak rasa pdk power ...

Btw my ear can tahan 2t pipe sound .... But 4T i kadang kadang xboleh tahan ...

Guys..need help..my bike got big problem today..very2 hard to masuk gear..and then when masuk..its jalan sendiri macam ada orang press gas.. y ar?

Timng tinggi kut .....
Chck cable minyak , carb .. Rantai dll

am from penang but using kips.. hehe can join discussion?

saya noob pasal moto bro..camne nk check timing bro? saya xpernah usik moto..rantai ok...saya rase pun cam timing problem jgk

Good Reed Valves is more expensive than the PDK block itself. RM600-RM700.


This articles can be found here!

---

Added on April 18, 2012, 4:14 pmTake your bike to the mechanics. They know how to adjust it back. Either is cable problem or timing problem. Ask them check your Air filter too. If dirty ask them blow the dirt out.

This post has been edited by TryX: Apr 18 2012, 04:15 PM

Rebuild means overhaul or clean head? Well...Which generation kips u recommended?

rebuild = turun sebiji engine .... service .. dan tukar apa yg rosak ...

actually .. LC turun engine boleh afford lagi ....

---

Added on April 18, 2012, 10:07 pmback to tis topic .... ayam wana know tis statement ...

warm up engine is engine manufacture punya idea atau our idea ???? good or bad ??

based on the article ... said tht warming up engine while IDLE no gooding cylinder wall and kotorkan valve .... DLL


i really care will tis protect our engine part or damage our part ???








This post has been edited by thianz: Apr 18 2012, 10:07 PM

this concept is good for fuel injection only
cause fi got temperature sensor but bike dont have so bad combustion will make bike unstable one
for carb still better idle a while let the bike warm a bit but i think lc got temperature sensor?

Why must warm up engine? The answer is simple. When you park your vehicle overnight. Base on the law of gravity, the EO all drop to the bottom of the engine only left very thin layer of oil film at the pistons and all the engine parts. As the day you want go to work. You want start your engine again. This process is where all your engine wear and tear the most. So Remember don't pull the throttle hard when the engine is just awake from the cold start sleep. Let it warm up a little, the oil need some time to warm up and go up again to every moving part of the engine. This method is to reduce wear and tear. And carburetor vehicles is necessary to perform the warming up sections, because carburetor need to get up to certain temperature for it to operate smoothly. Injections vehicles is different they operate more smoothly at cold start environment because they got sensors which can automatically tune the amount of fuel need to be feed to the engines. But doesn't mean u no need to warm them up. All vehicle have to warm up to "Reduce wear and Tear". Hope this help. Tak perlu panas lama lama. Just 2 or 3 min is enough. They talk cock only. Is no good for the environment i agree. But just awhile only wont pollute the environment as much as the LYNAS do..

---

Added on April 19, 2012, 12:01 amMy Yoshimura pipe gone liao....



This post has been edited by TryX: Apr 19 2012, 12:23 AM

Agree both of u and article saids...well..warm up actually 1 minit-2 minit ok already...more than that = useless and harmful to engine....

---

Added on April 19, 2012, 1:03 amBut the best solution is don't rem in first 1km-5km...don't give too much force to ur engine to ensure u had good engine.

This post has been edited by 163119779: Apr 19 2012, 01:03 AM

if 5 km already reach destination lo