Guys, just found out that he Wifi Direct feature on GNex is NOT working. Anyone know how to get it to work? There is no place to set anything, other than enable/disable.

---

Added on March 1, 2012, 9:02 pmNeed to root first. Then change the wpa_supplicant file. Have to find the right version.

This post has been edited by Harddisk: Mar 1 2012, 09:02 PM

So I can conclude that it's ICS problem?

Not a problem? How to get it to work? I can test it with my GTab though.

Use Power Button as shutter?

That's Wifi Direct for DLNA usage. I want file transfer like using BT to transfer file, instead it uses the Wifi interface. Much much much more faster.

Bro, I meant the peer-to-peer wifi file transfer, phone to phone.

Seems like Wifi direct on ICS is crippled.

Bro, you can try this out with S2 to S2.

They just peer like BT, don't even need to worry about wifi key. Will auto connect.

That's the thing with GNex. No option to configure, and no ways to connect either, as the Share ... Wifi Direct entry is missing from the Sharing menu.

All you can do is Enable it, then connect from S2.

Unfortunately, S2 can't establish a connection to GNex even when Wifi Direct is enabled.

Doesn't work that well and Wifi Direct keeps going off by itself.

At least my SGS can connect to GNex. My GTab terus hang. lol

I think they should stole the implementation in S2, copy bulat bulat. lol.

Oh ya, gallery still doesn't have the Share ... Wifi Direct option (I thought I saw this in 4.0.1).

---

Added on March 2, 2012, 3:49 pmYou tried once, you'll love it.

Pull you further away from iApple. lol

This post has been edited by Harddisk: Mar 2 2012, 03:49 PM

I guess I'm late, but I'm happy to receive it. Guess what just arrived?




Attached thumbnail(s)

Just applied my Ultimate Clear Plus+ screen protector. Initial impression not that good. SP size is obviously way too small with big gaps exposing the screen on the sides. The surface is quite sticky (not smooth like my RM3 SP on SGS) and attracts a lot of prints! Will see how well it fare against scratches after seasoning it, and see if it would became more smooth. There are plenty of tiny bubble dots on it as well if you look at it at an angle. Damn, I can't even see those tiny bubble dots on my cheap sp. I think it's prone to orange peel/wavy effects as well.

Will see if under the sun will get oil stain/rainbow marks or not.



As for the case, it felt cheap (don't flame me). There were some stain leftover from the protective adhesive tape used. Can't rub them off, use celophane tapes could fix it, but not 100% clear. Gotta let it drop off after daily use.



Probably the only GNex case that doesn't expose the pogo pins? Built quality has some rough edges. For the kind of money they are charging, I would expect more...



There's an sp that came with the case. If you are thinking of getting the Plus one, don't bother. I think the 1 that came with could do the job and it's free! The cut size looked EXACTLY the same, the thickness felt the same too and I don't think I could distinguish them if each of them are applied to 2 different GNex and put side by side. Unless someone wanna show his/her alongside mine.

Happy casing.

This post has been edited by Harddisk: Mar 2 2012, 07:34 PM

Yup, metallic. Not going for the Season 2 colours... they are... are to digest, for me.

My sentiment exactly.

This post has been edited by Harddisk: Mar 2 2012, 07:41 PM

Anyone can ajar how to utilise UOT Kitchen for battery icon mod?

@Acquainted does Skype video allows augmented faces?

Wow, so nice one? Mine 7 hours + takes about 18% off my phone.

---

Added on March 3, 2012, 11:41 amConnection wise still acceptable. Just that I never seen H+ appearing on GNex.

Even my friend working inside U mobile said so that he never seen H+ on his GNex.

---

Added on March 3, 2012, 11:43 amWhoa, cheaper than SGS2 non-G.

---

Added on March 3, 2012, 12:03 pmMy phone restarted by itself twice so far.

1st time was probably due to bad signal (usual Android problem, since Eclair or even earlier)

2nd time was when I tried to access to Check-In in Brut Maps.

Despite all the UI changes on ICS, the Android core is still pretty much the same as GB or earlier version. The heat still there if there's lacked of signal, the phone reboots itself it a certain apps failed to access to the internet via the cellular data.

This post has been edited by Harddisk: Mar 3 2012, 12:03 PM

lol.

I just realised something, CRT OFF animation is missing from my phone. I think after I flashed to ICL53F from IML74K. Anyone noticed the change or did my phone just screwed up?

Ya, changed both (dunno their names) to .5x.

EDIT: Yeah, seems like it's the Windows Animation Scale setting.

This post has been edited by Harddisk: Mar 3 2012, 06:59 PM

Get it now!!! Can hardly see any GNex in LYP just now.

Update for Youtube app is for Android 2.1, 2.2. It's to allow the Youtube app to playback HD content. The version that came with our phone is already HD compliant (wah sey, sounds so nice ).

Stupid Unifi. Connection to WhatsApp server sucks, now browsing Youtube from phone gets connection error!

DNS: caused by the DNS setting. Gonna set that in the Unifi router.

This post has been edited by Harddisk: Mar 3 2012, 11:07 PM