after one week of long wait, get to see my baby's picture finally...
miss it so much, especially when i driving my old car under the big hot sun without aircond 
cant wait to bring my baby back, but still have to wait for another week to let the paint job done 

[COLOR=blue]Am getting a 2012 version begining of next month!  

This area (red arrows):

[attachmentid=2688061]

after one week of long wait, get to see my baby's picture finally...
miss it so much, especially when i driving my old car under the big hot sun without aircond 
cant wait to bring my baby back, but still have to wait for another week to let the paint job done 

---

Added on February 16, 2012, 9:22 pm
why are the skirts in white? Didn't Honda ready it for you when you collect the car? Or did you just ordered them?

any black insight users here? I know Kelvin is one of them ..hehe from precious post in forum.today is the big day!gettin my baby today..!:D

mine oso black!! congratss bro!

not sure about kl, in penang we have a few members driving black. Me included.   

abit of jdm

I send to bodykit shop to do custom made skirts, and this photo taken after the mold done but havent apply paint yet, that's why the skirts in white

again, what did you do to that part to prevent the sound?
BTW, has anyone tried compared the FC for both the ECON ON and ECON OFF? what's the difference in FC?

and with ECON ON, what's does it really do to save FC? Supposely lower A/C, slower speeds, more Autostop, but what are the Honda's claims / percentages?

Try open the passenger side door. I tried twice and it won't go into long beep. I then tried open the front passenger door, voila done!

just wanna know the PIN Card behind is 6 digits number rite? (with hand writing one)

nope...its a 4-digit code...

4-digit code at the barcode there?

right here
[attachmentid=2689030]

right here
[attachmentid=2689030]

hey bro...
you should not post that photo although u already hide the number...
there is barcode there...

Point no 6 well taken.

Anyway got a new discovery today. All the above points was carefully studied today and i found that everything quite flush and well fit (except point 6 that u just brought up). Compared to my other car with much inconsistent gaps and fitting, there's no way point 1 to 5 contribute to the whistling sound. And I notice the whistle only happens when the speed is 100km/h WITHOUT ANY CAR IN FRONT OF ME.

This further convinced me on the conclusion about the whistling sound came from the front top area of the car. Out of nowhere, i got this crazy idea of releasing the bonnet (but still hooked) and drive it to 100km/h. Conclusion, NO SOUND.

After much observation, i notice there is a gap between bonnet and plastic paneling at the bottom part of windscreen. The rubber lining between that plastic panel and bonnet is flush but slightly sink, making a nice gap for wind to spoilt and whistle at certain velocity going through them. When i release the bonnet, the gap was disturb.

Later I tried to cover them with tape and walla.... 100% no whistling sound.

I will look for a proper rubber lining or flaps to beef it up and took some picture so u can understand / pin point the location. Now back to silent driving 
*any Aerodynamic Eng post available @ Honda Japan?

Point no 6 well taken.

Anyway got a new discovery today. All the above points was carefully studied today and i found that everything quite flush and well fit (except point 6 that u just brought up). Compared to my other car with much inconsistent gaps and fitting, there's no way point 1 to 5 contribute to the whistling sound. And I notice the whistle only happens when the speed is 100km/h WITHOUT ANY CAR IN FRONT OF ME.

This further convinced me on the conclusion about the whistling sound came from the front top area of the car. Out of nowhere, i got this crazy idea of releasing the bonnet (but still hooked) and drive it to 100km/h. Conclusion, NO SOUND.

After much observation, i notice there is a gap between bonnet and plastic paneling at the bottom part of windscreen. The rubber lining between that plastic panel and bonnet is flush but slightly sink, making a nice gap for wind to spoilt and whistle at certain velocity going through them. When i release the bonnet, the gap was disturb.

Later I tried to cover them with tape and walla.... 100% no whistling sound.

I will look for a proper rubber lining or flaps to beef it up and took some picture so u can understand / pin point the location. Now back to silent driving 
*any Aerodynamic Eng post available @ Honda Japan?

Watonk

Your are worth 10 Honda engineers. Well Done 

Something like this is very embarassing. Didn't know honda can be like a proton. 

Even my old proton also don't have wind sound (maybe because engine sound so loud that cannot hear anthing else! ha ha ha) 

Will check and experiment this weekend

Thanks

kudos bro, once had whistling sound in my inspira, also at 100km/h.

mine was from the side mirror. 

The only problem is i'm yet to found any suitable rubber lining or flaps to cover it. I plan to stick the lining from inside the bonnet. Besides that, i know that we can adjust/ align the bonnet by undoing the mounting assembly (left and right). But not sure whether the freeplay is enough to adjust the bonnet slightly towards the windscreen.

Hope the same solution will solve your whistling problem. As mention by ckk, his Inspira whistle at the side mirror. Yes its a different car but the same car could emit noise/whistle from different location.