May i know how many square feet was this awning?

Dear all,

Need some comments- i've been quoted for supplying and building tempered glass (thickness 9mm) with steel frame and 2 supporting pillars, with aluminium lourve at a total of RM9550, roughly about RM119 per sq ft. Is the price quoted reasonable?

Thanks in advance for your feedback

Depend on your glass roof size. The louvres cover the whole roof?

Yes, about 80% will be covered by the louvers

Then the louvers will block the sunlight? Then why go for the glass roof?

This post has been edited by henryj8: May 3 2018, 03:59 PM

i kind of liked the glass roof for asthetic look but i do want the area to be shady. so thats why im combining glass roof with louvers.

so the whole roof would be around 136 ft square.. is the price quoted reasonable?

Hi, what is the normal price for 3 panel window awning? I need an estimate if possible. Thanks.

Just wanted to share pictures of my sky roof, laminated glass 12 mm green tint with steel structure and steel hinge support (no pillars) and 50% aluminium louvers.

This post has been edited by chichichi: Aug 31 2018, 12:55 AM


Attached thumbnail(s)

It was less than 9k

Is this thread still active? Anyone has good installers of aluminum or polycarbonate awnings?

Anyone have contractors who can extend about L 24ft x W 5ft wood and tiles for my existing front porch?
Roughly how much should i budget?

hi bro, what do you mean by wood and tiles?

exactly like TS house in 1st post

Hi, I am going to renovate my house and plan to install awnings above the car porch and master bedroom.

Can suggest any good contractor / installer of aluminium or polycarbonate awnings?

May I know the total SQF?

I know Im opening up an old thread, since I couldnt find any new discussion on Awnings.

Since its a new venture for me, would like to seek advise on things for consideration.

The location is front porch which is 24X20ft.
Im thinking of of going one foot longer for both front and rear length and maybe 6in wide at both left/right of the width, so that water wont fall on wall pillars and reduce the rain drizzles.

I do have a half garden that is around 12X20ft, hence thinking of having ACP 16X20 and 8X20 on Poly Carbonate (PC) with white frosted(so its not clear plank)

Many had said the ACP is 4mm and PC is 3mm
Also thinking of having either 10 or 11ft in height sitting of the roof tiles and front either 9 or 10ft above the gate

Those are the rough Ideas I have. Need to call in the vendors to ask for info, but b4 that would like to get some ideas for the folks here. Thanks

This post has been edited by VeeJay: Oct 12 2023, 06:58 PM

hi sir, how does your pu metal awning hold up so far?

can i get the contact of the contractor? since im also planning to do pu metal anwing

Hi,
what is the Laminated Glass awning rate for 2025?
looking for 21x9sqf

Anyone do those C roof awning with acp or pu metal foam on top and aluminium strip below ...?

Care to share any pros and cons..

Contractor to recommend and to Avoid..?


Thanks 👍

Is it illegal to install these type of cage grille behind the house?