apogee gtx.... the corrosion was the result of Swiftech genius aluminium top + copper block, with dunno what coating which that time claim corrosion wont happen when launch

Copper + Acetal = Cheap, no reaction with silver, no problemo....

that pic is like cancer for WC system .
really seram till the bone part !

Yea !
Rampage IV GENE Motherboard Launched today lol

Lucky You...
after long waiting

---

Added on January 18, 2012, 10:30 pmwhich one is better?





This post has been edited by irienaoki: Jan 18 2012, 10:30 PM

Crystal link better [slot 2 n 3] u just lose not more than 40 in 3dmark compare to both 16x

not really like CLink
looks too thin for me
hehehe
i need something bigger

I think we just claimed first watercooled Cosmos II in Malaysia

Cooler Master Cosmos II Super Tower - Watercooled






Some adjustment needed to install the RX360 on the top. There's less than 1 mm clearance for the ram.

Total damage of wallet?
Look good, cooling the mobo vrm also

This post has been edited by pennykia: Jan 19 2012, 12:19 PM

jelly of ur studio setup

very much so

mind listing out the spec of the lighting and such??

Elinchrom 400BX strobes X 2 with 2 soft box. Need to add two more

Damage of the rig is unidentified :lol; I think 7-8k. Just the mobo + casing + gpu already 4k. Not including others

thats a proper setup u got there man

tbh im drooling on that instead of the cosmos II and the innards lol

the lighting is alright, I'd call 4 strobes proper

The rig is running at 5ghz. Will prime till tomorrow. Can't boot into windows stable at 5.1ghz even at 1.53vcore.

5 x 120mm XSPC RX is quite overkill in cooling the CPU only. The Cpu idles at about 2-3C delta. Under max load with fans at low speed = 60C.

Waiting for FC block

1.53 is too high and from my experience will degrade it faster

i got a customer running a 4.8ghz at 1.45v 2600k just under 8 months ago and now the thing need another .05v jump to make it stable again



p/s:the missus forgot to log off again i see

Not stable at 1.5V, raised it to 1.515. All these latest Malaysia chips are kinda meh

My 2600k running 1.45v for 5ghz. Malaysia chip

my chick 5ghz 1.53v during linx

i think cosmos II looks a bit cramp with all the hardwares in .
LD still the best to me .

hello..need advice..i got rasa kit rx240..will that radiator be enough to dump heat from my mobo+cpu?

else im planning to mod my 500R and mount rs 240 for the mobo..

but will rx240 alone do the job?

for ur spec, maybe enough .
if not enough, just add another rad to do the job, should be ok ur pump could handle that