time to dual pump+dual loop

I had a friend who faced the same problem. the problem remained for several days. He went for another pump thought it would gave a better push to the flow,but end up frustrated. What we did then was checked all the rad n cpu block. Then found out that there's some clog in the cpu block caused the low flow. He didnt flush his new bought rad, so the leftover inside it caused the clog inside the cpu block. Thus, mr.shepard, myb u should try to look inside ur cpu block n make sure its clean.

Thanks for the advice, tried tilting the case still no luck. Not gonna lift and shake the case , I'm not that strong coz its very heavy lol

Yeah, already looking for MCP655 at APES penang today but no stock..need to order from APES kl. Maybe go for dual loop single pump only..HAF-X is too small to accommodate 4 pumps...thanks boss

Hmm...I think you're right coz before this i didnt face this problem on this same setup..another tough job tonight it seems

Thanks boss

Sabau je la brooo...

something im working on

so much fittings sponsored or you buy? sure burns a hole in your pocket

some were sponsored.some re-used old fittings

waaa senanag hidup mcm ni...
wc pun dpt sponser

This post has been edited by Zzorro: Dec 24 2012, 06:02 AM

tunjuk bro punye modding skill dulu la kot..baru dapat sponsor..post byk2 gambar rig bro tuu..hahaha

modding pc wakakakak ..aku pandai Modding burger bakar jerrr hehehehe

If Irie was in Penang, for sure I pay him a visit to korek2 and learn modding secret hehe

ahaha nothing to korek with me.

anyway naked RX360 is sexy.

You used kertas pasir bro? Im gonna do the same on my RX360 soon, XSPC paint is no good..mine still new but easily gets dirty and paint off

This post has been edited by shepard: Dec 24 2012, 02:51 PM

damn nice looking rad if do like that.

got like expensive look.

Plus Grit 2500 sandpaper + autosol.....WALLAAAA... must wear sunglasses when sit next to your rig...

This post has been edited by kherel77: Dec 24 2012, 03:37 PM

well let see how it s gonna turn out.
gonna sell it for rx480 anyway since tj07 is to big for this tiny rad

320 grit with water





This post has been edited by irienaoki: Dec 24 2012, 05:53 PM

after done with the RX360 somehow i have some spare times to play with AX480.



so decided to strip it off

pe lg bro.. bleh buat acrylic shroud

i ll stick with the original casing.
less hassle.