I understand why the error occurred, so how do i get the sqlite_optimise to work without error?
edited: or do u mean, even though there is error, the sqlite_optimise script already performed what it should performed?

will try the 50MB 
just want to clarify this first, do i need to follow all instructions if i'm on the miui rom with talon kernel?
or i can just start with step 5?

Instructions
1. Copy the CWM zip to your internal sdcard
2. Mount /data and /system in CWM (IMPORTANT!)
3. Install using CWM
4. Wait for bootup
5. Open up Script Manager and launch /sdcard/bolt_scripts/remount_{*} as Root and as Boot. This is done because on Voodoo lagfix, Voodoo will remount the partitions again later after init.d scripts finished launching hence reverting the mounts to stock lagfix mounts. The script then has to be launched only after the Android OS has launched. One way is to use Script Manager.
6. Open up Script Manager and launch /sdcard/bolt_scripts/sqlite_optimize. This script can be used arbitrarily at anytime that you want. Don't load it as boot or copy it to init.d though, it'll significantly slow down your boot up as the script is a very long running script.
7. ????
8. PROFIT

alright, now I understand, but if i may. Those 3 add-on will work as i install it right? no need to use other program to activate it? Thanks again   

i'm using talondev?

TalonDEV-0.5.1-RC1-1000-I9000-CWM3

lorr..doesn't work???
didn't check it because when i flashed it and its done with no erros..
just now i check the kernel version in about phone and it stills the default miui kernel..

so i need to download the other version of thunderbolt! right(not the talon version)?
and then just follow the instructions?

@pika,
can i know how to reflash Stock JVT ROM?
My phones keeps lagging...
Would like to try to reflash the ROM alr...

already installed it through cwm and run the script but when i try to see whether it is works or not, the result was not same as stated at OP

i can find this file under /system/etc/init.d/:
S70darky_zipalign
S98screenstate_scaling
S98system_tweak

using terminal, when i run this code:
sysctl -a | grep vm

i didn't get this:
dirty_ratio = 90
dirty_background_ratio = 70 (when screen is on)
dirty_background_ratio = 55 (when screen is off)
vfs_cache_pressure = 1 (when screen is on)
vfs_cache_pressure = 20 (when screen is off)

same goes to this code:
getprop | grep MEM

the value is not same as this:
[ro.FOREGROUND_APP_ADJ]: [0]
[ro.VISIBLE_APP_ADJ]: [1]
[ro.PERCEPTIBLE_APP_ADJ]: [2]
[ro.HEAVY_WEIGHT_APP_ADJ]: [4]
[ro.SECONDARY_SERVER_ADJ]: [5]
[ro.BACKUP_APP_ADJ]: [6]
[ro.HOME_APP_ADJ]: [3]
[ro.HIDDEN_APP_MIN_ADJ]: [7]
[ro.EMPTY_APP_ADJ]: [15]

how did i conclude this?its not working or i've done it in a wrong way?
wow,can stand up to 1 days?????
how did u do that bro?
any tweaks?

i mean like how we flash nowipe version of custom rom...
cz i'm lazy to restore apps and datas... 

yup that is what i get..

it means thunderbolt! was applied successfully or not?

can i just flash to stock xxjvt and talon kernel only???will it solve the lag prob and increase the battery life??or is a must to make the thunderbolt tweak??how long can stand the battery life after make thunderbolt tweak??

---

Added on November 14, 2011, 7:10 pm
but froyo is quite battery consume right..???

pikachu,
if i want to upgrade from 1.9..1 to 1.9.2,
do i need to restore first or can straight away flash the newest version?

just flash tunderbolt 1.9.2 from 1.7.0..seems nothing different..however got the smooth feel,but not too noticeable.maybe bcoz im running 1.7.0 before...

@pikachu i am on r18 now which one should i flash? so many file for thunderbolt. @@

beware, thunderbolt is not working for CM7, unless u remove the screenstate_scaling before flashing. 

ya saw it on the thread. so many things to read.    a quick question, 40mb 50mb and 60mb which one is better?  i am currently on 40mb my phone is snappier than before.good job pikachu.

Is it xxjvt? It should be the same rite? It kept dropping wifi and the Market was extremely slow. I can't even update my apps. When I switched back to 2.3.3 DXJV9 the wifi was stable and I managed to download all updates with no problems.

Used PIT512 to flash.

I was next to my wifi point all night but still dropped wifi connection.

No point to set static IP as it would be a hassle to always need to 'un-static IP' my phone everytime I need to connect to other wifi networks. My wifi router is 24/7.

checked out the last few pages, ic3joker gave the link, hehe 

---

Added on November 17, 2011, 9:08 pmok now, guys, after I've done flashed the 2.3.5 GB ROM, now, 2nd mission, which custom kernel should I flash?!?! Muahahahahaa!!! (pervert face*)

Last time i flashed speedmod kernel...

It comes with cwm... Which means u can flash to custom roms...

Btw.... Ext4 vs rfs....

Pikachu, playing Asphalt 6 here. Found out at the end it'll get REAL LAGGY. then hang, force close, everything's like not enuf ram. not sure if this is Gingerbread's problem or Thunderbolt

Reflashed to xxjvt with csc home whatever.

Thought would fix the wifi drop issue but still remained the same. It will drop wifi and connect to 3G and then reconnect to wifi. Googled it and seems that there are a lot of people suffering the same.

Haha..just trying whatever I can to solve the wifi thingy.

Router has always been on forever. On static IP now and it seems that even on static IP i get disconection. While the wifi icon would still be there, there would be no access to the internet. Sad..

yo pika,

I was using ur script before i install Neo 18 kernel and it boot alright. Do i still need to delete the file and recompile it and reinstall thunderbolt? thanks

yea... lets get back to the topic~~
i tried to convert file system from EXT4 to RFS...

tried to go into MIUI cwm - with blue coloured font ones... i couldn't find the option le?

but when i flash to speedmod kernel...

i remember that i have this conversion option...

after flash to MIUI, this means im already in EXT4?


thanks!!

Is it just me or I can't make video calls after updating to 2.3.5 xxjvt?

Can anyone help me how to overcome the problem when the phone sleep for about 30 second than when I wakeup the phone took 2 second for the screen the appear