no need to go for 1.6 set (cost more as you'll need the whole clutch assembly including flywheel). Opt for ordinary Aisin clutch - cheaper and more comfortable.

I've once use a race clutch (triniti 6 pucks) with exedy clutch cover with lightened flywheel. Damn it was overkill.. The car trembles as the clutch plate doesn't have spring damper..lol. After a month (less than 1000km), I replace it with exedy clutch plate (keeping the clutch cover). Clutch still feel hard but less shaking (still overkill in traffic jam). after 2 years of heavy clutching, the clutch cover started to give way - it knock onto the bearing each time I release the clutch. Hence, last week, I changed a new ordinary Aisin clutch set but after fitting it, I realized the clutch could not fully depressed - found out that the flywheel was too thin.. so, a new flywheel was fitted.. Now, I have a light clutch and I love it

erm...
i'm more to a spirited driving...
my fren said after change to 1.6 flywheel...
car will feel better respond...
izit true...?
i'm ok with dat if can gain some power...

unless you can feel the clutch slipping, not really need to change straight away.

change clutch cannot gain power... only can release some power...
if plans to use 1.6 supertouring flywheel, u probably need to skim it to gain more acceleration... if just plug and play, u will lose acceleration but gain slight top speed due to its mass heavier than ur original 1.3/1.5 flywheel....

ic...
okok...
i'll confirm with my fren den...
thx bro for all d advise...

hoho..im planing go for 1.8....letting go my 1.6 include flywheel.... interested?

pm me...
condition & etc...
i ask my fren workmanship how much...
see worth anot...

A Boring Sunday........here's what i did....

morning rain...

Wira Club in LYN
I wanna join
Drive 98' Proton Wira Aeroback
4G15 Injection Auto
Just finish overhaul engine and painting whole car BLACK

wana ask u all sifu...
what size of d mid piping is d best for stock 4g15 engine ar...?
stock is 1.6 inch if not misktaken...
my fren ask me to go 1.7...
so wana ask some opinion from sifu here...
thx in advance...

I'm using 1.75 for my 1.6.....

So far so good ..... Don't go till 2inch should be fine.

what disc brake pad are u guys using now? I prefer low dust....
I tried the Ceramic NAO brake pad from one of the forumer here. The brake pad very grip, but can't last long. Sometimes it will have braking noise a bit.
Now looking for some other nice brake pad to try.

ic...
den 1.7 should be fine for...
going to try for my next service...
hehe...
hopefully can hav better respond after dat...

Going to test RapidStop Performance Brake Pad 550'C soon..and get RapidStop SuperSlots Disc Rotors..

Using PUMATech

Nice combo there

Hi, i have a wira 1.5 brought around 96' and the steering cover broken...i wonder here anyone have spare/used/fine stock steering for my replacement needs?

tq

---

Added on November 15, 2011, 6:31 pmhi bro, you might wanted to aware of the dented curve there...it might look fine now....but after sunlight and heat that area will bubble out themself soon....if you have a perfect sticking(no poking bubles)..recommend you seal the sticker edge with solder so it is sealed

just my 2 cent experience

This post has been edited by Codyx: Nov 15 2011, 06:31 PM

Just a new rim to show off... cant afford buying original rims...bwahahaha...



Super touring flywheel is my next project...btw new issue found...my flywheel oil shield cover leaking...

This post has been edited by verdict: Nov 15 2011, 08:33 PM

ohh... is that a Petronas advertisement??