Thanks, just finish download, will try tomorrow.

Hi, creezalird,

Thanks for your great Full Guide! Wow! This is the most complete and understandable user guide I ever seen, it seems include any kind of well know rooting, updating guide using different methods.

End up I choose to buy the Mobile Odin Pro, it is such simple and easier to use, once against thanks for your Full Guide, without it, I don't even know exist of Mobile Odin Pro as all the while I am using PC Odin or CWM, but this Mobile Odin Pro is much simple and easier to use for flashing Stock Firmware with Root function.

Now testing the I9100GXXLA1 firmware, hopefully it was fixing all my hanging issue, especially the Hotspot hanging issue. All the while I keep facing hanging issue most the time after on and off the Hotspot function. I was hoping it do fix the bugs without need of wipe data as I didn't do it yet, unless it not fix, then just do it. I had install too many things, wipe is a bit troublesome for me even though I got Titanium Backup.

Below is my first impression on I9100GXXLA1 firmware:

• Seems pretty smooth everywhere, I can feel like they is no any slightly jerking issue that happen in previous Malaysian stock rom.
• I try the camera and snapping quite some pictures, and play around the function + view during snap, it seems pretty stable and no hanging.
• Beside cannot set the phone language as Chinese (I no need this also), they is no any issue on displaying Chinese wording anywhere, include SMS, Music Player, Contacts and etc.
• My AnTuTu benchmark jump from 4.8k to now 5.9k Wow! This is a great improvement! From the Bar chart, now my score is quite near to origin I9100 device. I am loosing slightly due to my SD card performance only.
• New Lockscreen - same as Galaxy W Lockscreen. (Anyway I only use WidgetLocker, hehe!)
• Extra app call "Music Hub" which not working in local, it is mainly design for Europe country I believe. Just left it or remove via Titanium Backup. No issue for me.

At the moment, Never Regret Update to I9100GXXLA1. In-fact I shall do it long long time ago. Thanks for your high recommendation in previous few post.

** As for Hotspot wise, I need sometimes to confirm it never hang after on/off as it not every time occur such issue.

This post has been edited by Andrewtst: Mar 4 2012, 02:22 AM

Welcome, haha! I think no harm upgrade it, at least it seems pretty solid this ROM.

This post has been edited by Andrewtst: Mar 4 2012, 01:55 AM

Haha! Now I am charging my phone, tomorrow will know how the battery performance.

If you no need CWM, just buy and use Mobile Odin Pro, it can direct flash XXLA1 (I9100GXXLA1) and did a nicer root for you. Using this method is faster, easier and no yellow triangle.

If you need CWM, later just flash superatmos 3 via ktool, if not mistaken flashing via ktool won't give you any yellow triangle mark.

More infor, kindly head over to creezalird Full Guide, you can find this useful full guide on his signature.

This post has been edited by Andrewtst: Mar 4 2012, 03:25 AM

Actually you can set backup to external sdcard via preference.

Agree, I seldom like custom rom unless it is something special and cool.

Simple tweak stock rom will do.

This post has been edited by Andrewtst: Mar 4 2012, 09:14 PM

Hi, creezalird

Got a question, did superatmos v3.0 much better than stock LA1 kernel?

Do they have SmartAssV2 governor for SetCPU? Is this setting better? Normally what governor you set for SetCPU? I need a great in performance + saving battery setting. Now my battery still drain too fast.

If I flash the superatmos v3.0 via ktool, it will not having yellow triangle right? The superatmos v3.0 can flash via ktool right?

Appreciate much your help.

Oh, thanks a lot. I had no idea set at what, I do set as powersave, before is performance but that quite drain battery. I never try on hotplug before.

I no need superb fast, what I need is they is no any lagging/jerking when flip page or anything that with animation on launcher. I notice it slightly jerking when use on demand.

Thanks a lot for the explanation.

---------------------------------
I also got 1st generation of iPod touch, haha! now it is under freeze world, haha! as I hardly use it. Maybe because I own the 1st generation of iPod touch, iPhone never fancy me, as I feel really bored on it already, nothing much to customize even after jailbreak.

I just try out hotplug, yup! It is the best, no lagging. I find it is the most smoother also. and not always run in full speed.

Hope this solved my battery issue as well with best speed.

Thanks a lot.

This post has been edited by Andrewtst: Mar 6 2012, 02:18 PM

Hi, may I know where to set this? I don't see any setting for it at SetCPU, or I shall use which apps for it?

This post has been edited by Andrewtst: Mar 6 2012, 02:48 PM

I still on stock, I can flash to superatmos 3.0, after that what shall I do? Remove SetCPU and use Voltage Control?

and how and where to get the init.d & pikachu01 thunderbolt script support?

I testing Voltage Controller now, the I/O Scheduler noop or deadline, which is better?

This post has been edited by Andrewtst: Mar 6 2012, 04:07 PM

Oh.

I am a bit confusing now, as SetCPU can set during screen off different speed, this Voltage Controller cannot? Or it no need?

During save as boot, I shall save as init.d.script or choose (Recommended) startup service?

OK thanks, now I just flash to Superatmos 3.0 kernel as for the stock one, don't know why it won't stick my setting as 1200 Mhz. Keep default to 800 Mhz. No issue for Superatmos 3.0

I can save in init.d.script for this Superatmos 3.0

Why it seems everytime I login the Voltage Control, it show Default not save, and back to 800Mhz?

Restarting my phone now. After restart it do show 1200 Mhz now.

This post has been edited by Andrewtst: Mar 6 2012, 04:35 PM

Oh ok, as I notice it keep back to default 800 Mhz.

---

Added on March 6, 2012, 5:23 pmHi, creezalird

How come the AnTuTu benchmark is such low when I set Voltage Control to peformance and 1200 Mhz Max and Min.

Hotplug setting seems higher but still lower a lot compare with previously.

This post has been edited by Andrewtst: Mar 6 2012, 05:23 PM

OK, my last question, how and where to get SIO as I/O Schedule.

o

I already uninstall voltage control as it keep default to 800mhz after a while.

I find antutu CPU master also can set I/O scheduler. and it can proper save my clock setting.

This post has been edited by Andrewtst: Mar 6 2012, 09:14 PM

Snapping photos won't hang for me also.... but snap snap, preview, snap, preview.... then it will hang for me. So now I never preview when the camera still on.