QUOTE(blacktubi @ Oct 12 2012, 09:36 PM)
Don't worry, the driver pack are very universal 
the reason i didn't pin it to first post because i know nothing about linux . LolxTp Link TL-MR3420 3G/3.75G router owner club V1
|
|
 Oct 12 2012, 09:57 PM
Return to original view | Post
#301
|
 
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^  
|
|
Quote|
|
|
|
|
Oct 13 2012, 04:23 AM
Return to original view | Post
#302
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(blacktubi @ Oct 13 2012, 12:26 AM) Found a new device today. so far for TP LINK 3G router, i have confident in MR3420 this model only,MR11U, basically it's a MR3020 come with battery. I might get one Small size, come with battery, USB port. Can be modded into downloading rig http://wiki.openwrt.org/toh/tp-link/tl-mr11u the rest like MR3220, MR3020, MR3040 all have quite a lot of issu from many user feed back,  |
|
|
Oct 15 2012, 03:37 PM
Return to original view | Post
#303
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(iRonTech @ Oct 14 2012, 01:42 PM) TL-MR-3220 work flawlessly with my new Sierra AirCard 320U LTE modem, at first I was thinking need to find the additional modem bin file as this 320U modem did not listed inside tplink 3g modem work list. End up, just plug N play. good to know your seirra woorking well with your MR3220   the 3G signals part (from MR-3220 console), 320U keep showing 35% , while E1762 jumping btw 19% - 25%. Now only a question left, unsure if MR-3220 will optimize the Sierra AirCard "Tru-Flow" feature compare to direct USB modem onto laptop. Added on October 14, 2012, 1:59 pm same problem b4, nothing to do with firmware. Brought MR3220 & E1762 to office (different location) and test it, speed back to normal. End up connectify for the solution |
|
|
Oct 15 2012, 05:50 PM
Return to original view | Post
#304
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(digilife @ Oct 15 2012, 05:47 PM) MR3220 have a VERY strong WiFi antenna, WiFi users would love it kawkaw.......... i think mr 3220 is better than mr3020 or mr 3040..many user facing issue with mr3020 & MR3040 though |
|
|
Oct 17 2012, 04:32 PM
Return to original view | Post
#305
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
already mention , best dont buy first batch product,
it is like a white rats in Lab ,  |
|
|
Oct 17 2012, 09:13 PM
Return to original view | Post
#306
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
my tp link firmware can easily get 14~16Mbps anytime,
dont need open wrt,. and also no auto DC,. stable speed too,. Added on October 17, 2012, 9:23 pm QUOTE(Ruzumaki @ Oct 17 2012, 07:27 PM) My MR3420 cannot survive with TP-link official firmware. oh, for newbie, best stay with tplink firmware as if u try to flash open wrt by brick ur router,.. warranty is void Official firmware throttle my speed to 0.1~0.01mbps speed So I did some research and found the tutorial to flash openwrt on this website. I find it very Newbie Friendly, so I decided to share the link here. http://www.kaskus.co.id/showthread.php?t=10124215 Don't forget to remove the %2A when download the openwrt firmware http://www.4%2Ashared.com/file/LqtTaVCL/openwrt-mr3420-v1-squashfs-fac.html Flashing openwrt require patient and time, configure can be tough for newbie. I manage to install miniupnp and setup DNS myself by googling for 1 days. I brick once my MR3420 once for wrong DNS configuration, but I manage to save back my router due to the very powerful failover function. Openwrt is damn fast and powerful, allow 3G modem to successfully dial connection within 10sec. Damn love openwrt now, my speed damn so consistent all the time 10mbps++ Now I facing a problem is that my 3G modem will dc after idle sometime (few hour), it always dc when there is very less Active IP Connections. (DC when I didn't open any download) I always face dc problem when I put the connection to be on and idle overnight. Although I have set my auto-disconnect value to 0 or a very large value, the DC problem still occur when there is very less Active IP Connections and it idle for long time. The auto-reconnect function in Openwrt is not working as what I expected I saw something like this in my log, I notice there is auto-reconnect mechanism running but it is not successful. I click restart connection button on openwrt network interface webconfig page but it still fail to connect. I found that I have to manually restart the network interface (WAN) so that it only can successfuly reconnect. I use ifdown wan0 ifup wan0 in SSH to let it restart the network interface. Anyone have idea/script how to solve this? Logs » Click to show Spoiler - click again to hide... « This post has been edited by chuahcs79: Oct 17 2012, 09:23 PM |
|
|
|
|
|
Oct 17 2012, 09:33 PM
Return to original view | Post
#307
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(khairilyazit @ Oct 17 2012, 09:31 PM) ok.. my 3420 is acting up.. when my e372 is direct to pc, i can get 300kB-400kB dl.. when at router.. its almost down to its knee... then i guess you need cooling fan to cool down your router + E372,.. heat up modem E372 even with open wrt also useless n my e372 is heating up.. requiring reconnect every 5min or so.. hai.. |
|
|
Oct 17 2012, 09:37 PM
Return to original view | Post
#308
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
the cause is your modem HEAT UP
any modem if heat up, performances will be super worse or DC very often,.. |
|
|
Oct 17 2012, 10:10 PM
Return to original view | Post
#309
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
best for newbie and user dont know linux, stay with original firmware...
|
|
|
Oct 18 2012, 01:31 AM
Return to original view | Post
#310
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(Ruzumaki @ Oct 18 2012, 01:22 AM) Good idea =) try this open wrt but my zte mf680 stuck at 3G. But if the 3G connection dropped, openwrt still unable to reconnect itself... haiz not even H  |
|
|
Oct 18 2012, 01:44 AM
Return to original view | Post
#311
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(Ruzumaki @ Oct 18 2012, 01:34 AM) How come? Mine work very well i tried like 20 times,What is your Wan Protocol and Service Type?? My configuration like this: Protocol : UMTS/3G Service type: UTMS/GPRS Modem device: /dev/ttyUSB1 rebooot, reboot, reboot, all 3G oh, this dont support Huawei E372 too even though is 3G 384Kbps, i have to say the connect modem and performs a lot faster for sure  This post has been edited by chuahcs79: Oct 18 2012, 01:47 AM |
|
|
Oct 18 2012, 01:55 AM
Return to original view | Post
#312
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(Ruzumaki @ Oct 18 2012, 01:54 AM) Thats weird, mayb the one you use is old version of Openwrt? can give me the link where to download the firmware u are using ? The one I am using can support E372 and MF680, I just get it from Kaskus forum  Beside the reconnect issue, openwrt is Very fast, stable and powerful. Can install extra module like transmission torrent dl   Added on October 18, 2012, 5:40 amspeed this hour on tp link stock firmware is good,  so i think after all no matter whether tp link stock firmware or open wrt firmware, still depends on maxis,. the Open WRT firmware can't Reconnect after DC as i try just now,. so is This post has been edited by chuahcs79: Oct 18 2012, 05:40 AM |
|
|
 Oct 18 2012, 03:57 PM
Return to original view | Post
#313
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(kizwan @ Oct 18 2012, 03:24 PM) » Click to show Spoiler - click again to hide... « is there anything i did wrong ? i have to flash back to tplink stock firmware to get online  |
). Also wireless N connection works ok for me, connected at |
|
|
|
|
Oct 18 2012, 04:00 PM
Return to original view | Post
#314
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(blacktubi @ Oct 18 2012, 03:58 PM) You can't run "opkg update" because it required a working internet connection. so i need a networking that come with lan cable to plug in my MR3420 for the LuCI to update the packages ? Added on October 18, 2012, 4:03 pmwell stock firmware get me this speed, consider not bad  think for a noob in linux like me better stay with stock firmware This post has been edited by chuahcs79: Oct 18 2012, 04:04 PM |
|
|
Oct 18 2012, 04:08 PM
Return to original view | Post
#315
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(blacktubi @ Oct 18 2012, 04:05 PM) You need a working internet that come through LAN to update the repo and install the packages then i guess i have to use ZTE MF600 modem,  direct plug in the lan and click update correct ? |
|
|
Oct 18 2012, 05:32 PM
Return to original view | Post
#316
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(blacktubi @ Oct 18 2012, 04:11 PM) ya, this should works after trying everything,I rarely use GUI, do the installation stuff in command through SSH stuck @ modem device : i try all below : /dev/ttyACM0 /dev/ttyACM1 /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3 /dev/ttyUSB4 /dev/ttyUSB5 /dev/ttyUSB6 none of them able to device my both ZTE MF680 or E372 Added on October 18, 2012, 5:52 pmthink for a noob of linux like me better stay with stock firmware as i remember Fruitie say: why try to fix when ain't broken This post has been edited by chuahcs79: Oct 18 2012, 05:52 PM |
|
|
Oct 18 2012, 07:47 PM
Return to original view | Post
#317
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(hairul @ Oct 18 2012, 07:01 PM) But 753s its not lte modem but still have 2 port for external antenna. Mf680 should make 2 port..... that's why external antenna is strong not suggested for DC-HSPA+ modem with single external antenna hole,. |
|
|
Oct 18 2012, 08:15 PM
Return to original view | Post
#318
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
i give up,...
cause tons of headaches, and back to stock firmware now,.. speed is awesome with stock firmware, so i guess i have to stay here as super noob in linux |
|
|
Oct 18 2012, 09:03 PM
Return to original view | Post
#319
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(Ruzumaki @ Oct 18 2012, 08:31 PM) chuahcs79, wow after load the usb-modeswitch & usb-modeswitch-data my ZTE MF680 connect in 1 second after reboot I think the problem that your MF680 and E372 is not detected is due to this 2 module usb-modeswitch and usb-modeswitch-data I having the same problem becos I follow blindly on kizwan guide. kizwan guide is very good already, I think he just forgot to mention on usb-modeswitch and usb-modeswitch-data Remember to reboot router after install all the module I manage to connected to 3G using ttyUSB1  it was done now, whewww,. big thanks to -> Kizwan also thanks to ruzumaki too |
|
|
Oct 18 2012, 09:25 PM
Return to original view | Post
#320
|
|
Elite
6,931 posts Joined: Apr 2011 From: Bolehland for sure ^_^
|
QUOTE(Ruzumaki @ Oct 18 2012, 09:20 PM) kizwan post should really pin on first page, very useful guide =D yea let me get everything down,Big clap for your hardwork and effort chuahcs79, welcome you jump ship to openwrt haha  and pin it in first post, for open wrt wanna be of course do it on your own risk too just now i did everything in less than 2 min only, guess practise make perfect |
|
Topic ClosedOptions
|
| Change to: |  0.0575sec
 0.24
 7 queries
 GZIP Disabled
Time is now: 13th December 2025 - 09:28 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.