Hey guys , from where I can download the kernel - 2.6.35.13 cyanogenmod rmcc@tenkian #2 in zip format ?

dear bro, cant access this mode at all...straight away boot into gaia boot screen, then miui bootscreen and bootloop happens...

same goes for download mode

how bot using phantom rom nbo, n release ur sd b4 rebooting device

tried flashing phantom rom nbo but continue to fail..., no sd card btw...

use adb to install recovery by fastboot n windows, instruction has been given together with phantom nbo if u download da folder of sky rev

---

Added on May 16, 2012, 5:40 pmn mr angelictears......any progress?

as i never seen any release from u n still, please create a perfect zip updating recovery,boot image n splash screen,n please... no slow boot as my fone suffer really serious problem from da result of slow boot. sorry if i offend u.

---

Added on May 16, 2012, 5:49 pmbut no worries, only my sd went corrupt as a result.managed to save my fone back.thanks to phantom....sorry, former phantom rom creator advises. it back to normal again.

let me brief my report. when flashing ur Gaia2.0.1RC_2.zip from eav, first boot took about 20 minute to reached os, still .com provision still in there, no problem on it, but on second boot it went up to 30 minute to boot and third boot not success, suffer problem like taeru, not booting at all, cannot flash using zip and if use nbo, it will fail, but i manage to force boot but only loop boot animate occur as i need to reach os to go into recovery. last result, using adb and install 2.1 stock again to regain my corrupt system. and da result, as i said before, my sd went berserk n cannot be access from any reader.

thats all, its seem not all tester suffer this problem as it takes lots of time to think of da best way to recover my fone

This post has been edited by terry@android: May 16 2012, 05:49 PM

dear terry@android,

how to flash using adb, is there any command i must type??? in the folder for phantom, there included few .bat files....i followed both instruction

1) boot in fast boot, run-> install original recovery.bat, succeeded, phone reboots and go to bootloop...remove battery and normal power on, fail, try to boot to download mode....still in download mode, not CWM
2) boot in fast boot, run-> Install ClockWorkMod Recovery.bat, succeeded, phone reboots and go to bootloop...remove battery and normal power on, fail, try to boot to download mode....still in download mode, not CWM
3) after flashing both, tried to flash phantom nbo, fail at sut lr...

so very sorry to appear noob, but how to flash using adb...thanks for showing me the right way!!

This post has been edited by taeru: May 17 2012, 12:58 AM

sorry to ask,r u sure u tapping da rite command to go to recovery mode, i mean cam+up+power, coz as i see ur reply repeatedly saying .....'normal power on, fail, try to boot to download mode....still in download mode, not CWM' ..... of course if u boot to download mode, it ll go to download mode. not cwm.

did i say flashing through adb? no, i asking for installing recovery using adb by fastboot (using window) not flashing nbo using adb but if i m wrong, sorry... as ur problem cannot getting through cwm recovery, did u try downloading da original software for mi300 that will flash ur mi3 to original rom from india? try that, and also dont use da software, suck out da nbo while da software still running. and also, what error occur during last stage of nbo? da number? did u check ur cable?try replacing it.

Didnt know any other method, but try this, when flashing any nbo except phantom, when it says reboot device, unplug ur phone, boot to recovery and plug it back.

I ll try to find other method, thanks for da problem

---

Added on May 17, 2012, 5:57 pmand last question, what rev number or what it saying when u go to download mode on ur fone? can u stated all of da info here.

This post has been edited by terry@android: May 17 2012, 05:57 PM

bro terry,

thanks for your reply...finally i can get back to using mygingerb 1.1.0...the biggest reason is because.....i press different key combo to get in recovery!! >.<

thanks!! thanks!! thanks!! for your concern and detailed explanation!!

finally get my phone to work!!

now, trying out your guide on installing mygingerb v2.0.1 on the mygingerb blog...hope it works!!

ok so the part with cwm...you really helped me alot!!

ok, but i still cant install via sut lr...error im getting is

Error Code: 0xf626

Error: task 1of2, Download image
(QC,OEM,AMSS,APPSBT,aBOOT,aSYS,aRCV,aSPL,aHID) fail,
Error = QPD_ERROR_ARMPRG_HELLO_TBUFFER (0xF626).
Init Mode = Emergency Donwnload Mod

haha finally my phone working, very happy now,

thanks mr terry@android...!!



This post has been edited by taeru: May 18 2012, 08:30 PM

@taeru

normally i would been furious bout that silly problem like "press different key combo to get in recovery!! >.< " but i will let it go this time

here all da combo to remember

Recovery Mode: Vol_Up + Camera + Power
Download Mode: End_call + Vol_Up + Power
Master Reset: End_call + Camera + Power
Fastboot Mode: End_call + Vol_Down + Power
FTM Mode: Vol_Up + Vol_Down + Power

Please ... and please again, remember that ok!

i dont really recommend flashing da beta of GAIA, it still dont fully working, but u re free to try.....

but still, i quite thankful bout da second problem, da Error Code: 0xf626 occur while using SUTLr, so u ll be forgiven. Ok.... here da solving method;

1) like i said before CHANGE UR CABLE !
2) if it still occur while u already changing cable, do this, when da NEXT button starting to flash already push, juz wait for da error, after getting da error, unplug ur cable and change da port into other usb, flash again and u will get ur fone flashed by 3 magical minute...

da words Error = QPD_ERROR_ARMPRG_HELLO_TBUFFER (0xF626). occur becoz there da line between device n pc been disturbed, maybe u really like to flash and flash and flash... quit that... it ll save ur fone life.

and again, please do not again, ever again saying this silly sentence.....press different key combo to get in recovery!!

anyway, enough scolding..... glad ur fone can be use again, so....da agreement before says u did buy me a cup of coffee if it solved, post me da cup and bunch of instant coffee

commemorate my 99th post here

---

Added on May 19, 2012, 3:37 ami ll help in any problem if someone ask, but please make sure it worth it....

This post has been edited by terry@android: May 19 2012, 03:37 AM

what is stable kernel tht support usb tethering?

no new update ?

Quick update..

For staters the rom will be optimize for performance on older devices. This means that code optimization is a priority, still resulting longer development period.

Ics is not a priority since android 4.1 jelly bean is out, so older device is left out cold. So gingerbread is what we have left. Though until now gb ia not very optimized yet, I plan to change that.

And a quick fix for long boot is to reflash the gaia 2.0.1 beta with ungaze data2sd. This for me fixes several long boot issue and as an extra a boost in performance. Though note that this requires sd card class 4 and above (though I use class 2 now ). Overall steps are to do a titanium backup, wipe and reflash, flash ungaze data2sd, flash google apps, restore titanium backup, and install the latest v6 script beta. And you'll all set. Pretty stable for me.

Note for v6 script, enable nitro lag nullifier, and use bullet proof launcher.

Best launcher to date? Holo launcher, available on google play now

waiting patiently for next stable gaia rom for mi300

Help!! My status bar missing after flash to GAIA...

omg got update

Arghhhh!!! Flash again!!

best rom i ever had

Now this phone can BBM

http://forum.xda-developers.com/showthread.php?p=49864441