slow on All Speed or certian speed setting?

noise, u have to check, what type of noise.. grinding noise, nyet2 noise..ringging noise..

For those wish to using manual without connect the remote PCB, this is helpful. However, capacitor still needed, usually 2uF is enough. Ypu may change to 3uF to make it spin fast.

**Update correct wiring**
Red(Live) + Yellow(Speed 3) = connected
Orange(Motor Live) + Black(Neutral) + capacitor = connected
Blue(Motor neutral) + capacitor = connected



This post has been edited by cgamer: Aug 4 2023, 06:27 PM

Uusally the 0.68uF capacitor also need replaced. The default value is 1uF if you check clearly in PCB, it print 1uF, 450V

Is stuck on speed 2/4. Won't get faster if I choose higher speed.

Noise: subtle nyet. Tolerable at this level but still if can get rid of it I would be happy.

This one might need soldering kit. So far the "wire" solution was easy to perform. Not really happy about DEKA fans at all.

Is time try direct connect without PCB…. Set it to Speed 3

Anyone knows what is the issue with the fan in the video below? It kept moving and stopping with beeps in between. Model is F5DC

https://youtube.com/shorts/_mAWtIqAyU8?si=ny5g1pbccgm09zrb

This post has been edited by Songchien: Feb 29 2024, 11:26 PM

Replace the Capacitor........mostly the capacitor inside no more value.Dried capacitor.

I suspected so. Do you happen to know what capacitor this model uses?

Usually is 1.5uF till 2uF. For correct value, please open and check

How to claim warranty for deka fan? Been searching their website didn't find any links

Looking at getting some new ceiling fans for my new place and great to stumbled on this post. Yeah, I also have some Deka fans for my current place and out the 4 Deka fans, I have had my fair share of bad experience.

I will stick with mainstream Japanese brands for my new place.

What parts need to change?

https://deka.my/about-2/

"Founded by three dedicated men who believe in making fans that anyone would want to get along comfortably every day."

Should change it to three men who are dedicated to making crappy failure prone fans. Wonder if their water heaters are also problem cases.

This post has been edited by imbibug: May 1 2024, 05:42 PM

just the pcb. The cheaper 3 blade ones suffers this problem after 5-6 years. depends on model, pcb on shopee is like 20-30 myr only.

Hahahaha not to mention countless blade patah cases

guys, i got a dc fan from deka. 2yrs 8month, now the problem begin yday, when turn on the power, got tik tik buzzer sound from fan then not spinning, if do something with remote let say press turn off, turn light off, then press back turn on, sometime it work normally till off, then sometimes problem cam e back after awhile when turning on.

any idea why this happening ? all other function is smooth

any recommendation for those mainstream japanese brand?

does anybody know how to access the capacitor section of this stupid deka fan? model DC2-311
i only managed to open until here then i dont know how anymore. very complicated and the metal plate is like 1 whole piece.




This post has been edited by Carlos_Santan: Jun 10 2025, 06:00 PM

this model electronic module is at top. not under motor like other model.
try check the top cover (the 1 at ceiling)