For those wish to using manual without connect the remote PCB, this is helpful. However, capacitor still needed, usually 2uF is enough. Ypu may change to 3uF to make it spin fast.

**Update correct wiring**
Red(Live) + Yellow(Speed 3) = connected
Orange(Motor Live) + Black(Neutral) + capacitor = connected
Blue(Motor neutral) + capacitor = connected



This post has been edited by cgamer: Aug 4 2023, 06:27 PM

Uusally the 0.68uF capacitor also need replaced. The default value is 1uF if you check clearly in PCB, it print 1uF, 450V

Is time try direct connect without PCB…. Set it to Speed 3

Replace the Capacitor........mostly the capacitor inside no more value.Dried capacitor.

Usually is 1.5uF till 2uF. For correct value, please open and check