eh.. stumbled on this thread... DEKA Ceiling fan also got Fan..

anyway, i got 5 Deka x5h (name something like that, 5 blades, remote).

the fan damn annoying, got 'ringing' sound (vibrating center plate, (the 1 with the remote receiver) with the surrounding cover.)

its a metal to metal vibrating contact.. have to tape that bloody thing to dampen the noise.

any1 know how to dismantled the big motor cover?

Adjusting to other speed also slow?
Maybe capacitor at fan there broken. Can change that capacitor.

might be the bottom cover of the fan.
mine having some sort of sound like that..
have to open the bottom cover, and retighten.

the center middle cover, just need to twist it to open.
the bigger cover got 3 screws under the center middle cover
btw, this is my fan la.. but seeing ur model looks like the same design bottom part.

in other matter, last time i bought 2 box (4 unit fans).. and bought another single 1.
but the speed for the 1st 4 unit kinda slow than the single 1 unit i bought.

opening up the circuit, reveals that the earlier 4 unit using 450V 2.0uF starting cap.. but the latest one 500v 2.0uF.




i have replace/upgraded the capacitor from 2.0uF to 2.2uF for the 4 unit 450v.



now the fan much more faster

i seems u have replace the capacitor in same model.. im thinking y u need a manual to open?

ringing sound?
mine got the ringing sound.. the round bottom plate (the 1 with ir sensor) vibrating against the big motor cover. as both item made by metal.
if u want to open, just spin the bottom plate.. but not sure urs same design with me or not.

u can try search youtube how to open the bottom cover.
try search deka+fan+capacitor.

from there can find suitable videos..

ive open mine and re-tighten all screw inside (btw, some screw too tight will vibrate hence need trial and error)

do u have any other IR devices in ur room?
i notice if i press my led light remote (IR) and slightly pointing to fan, it will beep receiving IR commands, but not sure what command.

Most probably capacitor as only 1 speed effected..

Or might be relay, if the circuit using relay for speed selection.

Usually buzzing comes from motor not enough 'current' to turn.
Might try change capacitor 1st.. cheapest solutions if diy.

Btw, what model?

Got 1 pana fan in my mil house.. buzzing also.. and slow spinning..
I changed capasitor (i changed all 3-4 coz donno which 1 problem) .. then it works fine..

Slowing motor most probably the caps broken..
Cheap solution is just to soldered out the caps and replace with same spec.
Any other brand also same.. just depends on the quality of the components..

Open ur hp camera, point the IR to ur hp camera and press2 button.. See got light emitted or not..

No light means remote not functioning...

This post has been edited by Max: Apr 23 2020, 10:36 PM

OOoO.. dem.. this is scary...
Very dangerous.. looks like their plastic quality not good..

Depends on the circuit boards. Need to take out boards, and examine the caps value.
Just now replace KdK 3 speed remote fan caps. Changed all 5 caps (3 actually degraded) 1 shot.

slow speed most probably capacitor broken.
try changed capasitor 1st. its cheap fix.. around rm15-20 for 5 pcs capacitor. but need to use soldering.
motor seldom broken.

Some pics of ur circuit board and caps value maybe can help.

urs maybe use clips.. try peel slowly if still cant turn..

u turn the center plate or the outer casing?
if cant turn, sorry im not sure how to open.

mine other model, but need to turn the center plate. need something 'sticky' like the phone holder gel mate to get a grip.

This post has been edited by Max: Dec 28 2020, 09:08 AM

got ur answer already @MorningBoyz ?

Doesnt have led indicators for speed, so the beep to acknowledge the fan received remote signal.

most probably the min capasitor.
if u can diy, just change all the caps. usually 3-4pcs only. cost less than 30 bucks.