This 2 is the most detail unifi setup guides:
http://www.mikrotik.com.my/setup-for-unifi/
http://klseet.com/index.php/mikrotik/mikro...setup-for-unifi

good luck

Get us more info and I'm sure someone here can help.

Is your PPPOE connecting?

Can you ping the net from your PC? Can you ping the router from your PC?

Is your PC getting IP/DNS address from DHCP or manual?

Do a /export compact from your RB951 and post here.

able to ping 8.8.8.8 from the pc and also able to access the router from outside of the network. just cannot access the internet using the pc. the pc also getting IP from DHCP.

If you can ping 8.8.8.8 then routing should be OK. Maybe DNS problems? Can you ping, say, bbc.com (or choose a website that you haven't been to before) from your PC?

This post has been edited by soonwai: Jul 4 2014, 01:01 PM

should be dns problem, and did u setup ur DHCP server correctly to lease the correct settings?

how to setup the ip object by group then add it them by firewall here?

sifus, is there any way to monitor the usage for each wifi device?


and also recently my internet wont even move i found out there's some outgoing connection even though no 1 is using. any ideas?


This post has been edited by Vio: Jul 27 2014, 02:23 AM

Ref to this:
TO BLOCK DNS ATTACK on WAN INTERFACE

http://aacable.wordpress.com/2011/08/15/mi...m-lanwan-users/

Hi All,

I was wondering if we are able to configure Astro IPTV on Mikrotik 715U HnD on Maxis Connection. I am able to get the internet work but not IPTV....

editeddddd..

This post has been edited by zr125: Aug 5 2014, 12:07 PM

Hi guys, just bought my MikroTik RB2011UiAS-RM router yesterday as I'm switching from PFSense to MikroTik for cost issue. As I am trying to change the DHCP IP from 192.168.88.1/24 to 192.168.1.1/23 and the IP my client get from the router is 192.168.1.X with subnet mask 255.255.255.255. Any idea what is wrong here?

Have you check the Pool

Yerp. All set to the same IP. I can get the leased is just that the subnet mask is weird 255.255.255.255.

Can share output from

/ip dhcp-server print
/ip dhcp-server network print
/ip pool print

This post has been edited by amirsubhi: Aug 6 2014, 12:21 PM

will do later. was not at home plus its a new Unifi installation. thx in advance.

Hi guys, encounter a weird problem. When I set my address to 192.168.1.0/23 the network automatically changed to 192.168.0.0. wonder why is this happening. And what is the default bridge-local do? Really new to mikrotik. Thanks in advance

I don't use Astro IPTV but I believe it uses vlan 823. That's all I know, sorry. Maybe try setup like HyppTV but use 823 instead of 600.

What are you trying to achieve actually?

It's correct, for 192.168.0.0/23 network, address range is 192.168.0.1 - 192.168.1.254.

Don't remember exactly what the defaults are but bridge-local is typically used to bridge the 2 switches and the wlan on the RB2011UaS-2HnD. That's how mine is configured (everything is on the same network). Except ether1 which is my wan port and ether10 is for iptv.

This is what I do to monitor traffic for an IP address.



You will need to know the IP address that you want to monitor which you may be able to discern from the DHCP Lease table if static IPs aren't allowed.
I have rules for 10.0.1.2-10.0.1.254 but they're disabled until I need to look at them. Having all the rules enabled increases CPU usage significantly.

Another way is to enable /ip traffic-flow and use a Netflow client on your PC to observe.

This post has been edited by soonwai: Aug 9 2014, 04:20 PM

Noted your reply. But the problem is when I enter 192.168.1.0/23 network, address should be 192.168.1.1-192.168.1.254. But the mikrotik router automatically put it as 192.168.0.1 for the network. This is not a logical addressing schema. Btw I've entered Google DNS server but when my client connects to the network I will get TM DNS. It appears in the DNS as Dynamic DNS.