i want to load the Touch X-Power ROM. i read out all the instructions but got some questions:

1) I'm running on Cognition S2 Kernel:Ninphetamine-2.1.3. do i need to change this value before i load the X-power rom?

HOW TO GUIDE, IF CHANGING KERNEL located in \system\etc\init.d\s98undervolt & maybe another... check all with name undervolt in them....

If you are changing kernel to another, first check how many Mhz states it has.

siyahkernel has 7 values like this

echo "1350 1275 1175 1100 1000 900 850" > /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
echo "1350 1275 1175 1100 1000 900 850" > /sys/devices/system/cpu/cpu1/cpufreq/UV_mV_table

Ragemod kernel has 6 values like this

echo "1275 1175 1100 1000 900 850" > /sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
echo "1275 1175 1100 1000 900 850" > /sys/devices/system/cpu/cpu1/cpufreq/UV_mV_table

YOU MUST change theese values BEFORE flashing new kernel, otherwise it will lockup all the time

2) i can use the CWM to load this ROM right? does this ROM will perform the full wipe?

Malaysia Singapore new ROM is out on kies

PDA:I9100DXKI2
PHONE:I9100DXKI1
CSC:I9100OLCKH1

i got the zImage file and tried to flash it through CWM. but my phone stuck at the SGS2 screen with the yellow triangle. zImage in not a kernel right?

where to find that script?

i'm was using the Cognition ROM with Kernel:Ninphetamine-2.1.3. i tried to load the zImage but nothing happen. so i load the stock kernel now..i'm not sure whether this is the correct zImage or not..

still 2.3.3

can i at least do a backup of it? just in case anything goes horribly wrong

oh ok i'll go do it now. thx for ur help! right now im on ninpo kernel, should i go back to siyah?

oh ok so i'll use ninpo awhile, see if still give me prob or not. lucky i haven deleted them yet  shud i delete the virtuous oc folder?

i just flash to siyahkernel now, in the init.d folder, theres no undervolt file, only got 74-ocdaemon. could it be cause i froze the daemon controller in titanium backup?

because 4 is not a good number in Asia?     

there's no s98undervolt in init.d i havent deleted anything yet but got s98TX though

hi im newbie here... to all sifus. please help me.. its about my mms apn setting.. can"t send mms.. the pict stuck at sending.. by the way , are we need to enable "use packet data" to send mms? .. anyone have the right mms setting please pm me... tried the telco setting on the 1st post.. not working..please help! TQ

could be cause i underclock too much? last night i underclocked it to 800mhz max, i think that could be the cause. i think i'll just see if still have this issues or not

strange, i didnt see it in my /mnt/sdcard

anyone using profile in setcpu? is it recommended to create profile? if yes, then what is the recommended profile ^^ Thanks in advance!

ah one more thing, should we tick "set on boot"? how to set undervolt all to 100mhz?

Thanks!
sleep profile set to 500mhz is it ok or too much/low? 
for undervolt i just leave it as default value and tick "set at boot" safe? or the changes only apply after reboot?
no idea about how to set undervolt, any guide? 

i tried, but there's only UNINSTALL shown.

where to get my titanium backup pro key to backup?

already done. re-download the file and flash it with CWM.

reflash with ninphetamine 2.1.3 kernel to enable CWM recovery mode.. Thanks!!

As to edit the undervolt stuff, we need to edit it through CWM recovery mode right? i don't think that we can check it through normal use. Sorry, a bit noob and still new on this part..

dont wait. it'll come but very2 late so dont wait for it. use what you comfortable with. i'm used to unstable and testing systems so i'm good. got few minor things that will affect your daily usage if you use CM, especially the notifications and while calling, really2 not good quality.

downloading DK roms

what music player did you guys use ?

Once I update through Kies, will I lose my root?