It is CM stacker older model ....

u can tie the cable or sleeve it into similar color or two contrast color....

too many colors usually end up with messy view although it is not that messy ..

It will be better to sleeve your cable in black colour sleeve. Not so messy.

CM Jet 7+ or something i guess.

looks small...shud be quite noisy right?

anyway.. that jet 7 also quite nice... the design also quite nice last time..

yeah it was last time just like grandpa story ....

now days people talk about heat pipe with aluminum heat sink ...

no comment from case owner after so many comment ???

wonder where is he ??? busy with the case ???

izdihar:

ya sata cable can be sleeved in black 2 look sumthing lyk diz..

or even better, for it to look like this



dat 20-24 pin converter, u can get a longer one for RM5 at Sri Comp, LYP and hide the converter head on the back of the mobo plate.


the SATA power cable, if u r brave enuff to reposition the head, u can try to reduce the gap between 2 sata molex heads to look like this..



lastly, dat mobo power n hsf power cables, try to re-route them using the same path...meaning, combine both cable to reduce the mess around there..

how u shrink the heatshrink tube? using what? last time i did it cause the plastic to melt a bit, are u using lighter or hairdryer

better to use candle and set about 10cm of distance from the fire ..

let it shrink naturally.. it take few seconds before the heat shrink tighten...

patience.... key to success and make sure wear glove ... .

E-J@1: hair dryer n tonnes of patience

Doom: tried using lighter but direct burnt heat is not frenly to some heatshrink... end up wif sum burnt marks.. thus, been using hairdruer ever since..

p/s: my sifu taught me to sleeve using soldering gun.... industrial heatshrink can tolerate dat but Vantec's heatshrink can't..

already tried using hairdryer, but it didn't shrink, dunno maybe i didn't heat it long enough, btw, will it shrink even for an hour i heat it up the heatshrink? i only tried for 2 minutes, got fed up & use the kitchen's stove, damn it melt the plastic thingy a bit

a heat gun is the best way to do it. the cheapest and easiest way would be a lighter...which is what i use and they all turn out fine..

i only use an old hairdryer..and no prob so far

Hmmmmmmmmmmmm, which wise old man taught u that soldering gun trick?

now dat stove trick is a lol .. neva tot of doing dat wor~

use dat on Vantec heatshrink?

i kno i gonna regret saying his nick here, but he is Addario...

yeah...i use lighter even on my vantec shrinks. actually i use lighter on ALL my heatshrinks... be it vantec... uglyvamps, or even jalan pasar's

colors oso either black or whatever other color there is out there.. except UV reactive...never had UV reactive shrinks before.

honestly...the vantec shrinks are the worse... too bloody thick and it doesnt shrink nicely... id rather get shrinks from jalan pasar. those work perfectly for me

fr my experience, i wud not suggest vantec's as well... get uglyvamp's or those industrial heatshrinks from jalan pasar better... Vizo's heatshrink, i'm not sure... wat do u say, ianho? u r lyk 1 heavy user of Vizo's sleeve kit... how does it fair to other heatshrinks?

ya thanx guys for the support, i used the stove cause very lazy to buy a lighter, next time i'm goin to do it the rite way

LOL! U never noticed that all my sleeving work is using good ol industrial grade black heatshrinks? Those Vantec @ Vizo heatshrinks r a joke. Do they even shrink?

Who's Addario?

he's my senior bak in the campus...

his rig: the dual sleeve CM



i think he stopped posting a bit earlier b4 u became a mod here... dunno... i dun see him posting here anymo... but i kno he's reading this... behghey~ hahahahah