can i knw for myvi... RM300 is included doing whole chasis below? u put there RM100 for A-pillar mean is additional is it?

Okie bro, wait for you next week and let me know how the foam "perfoam" on your sweet celica!



The red box is where the cover are, these are smaller then the current BMW covers as we cant see the chassis beam, so it must be under these red boxes. The rear blue box is the rear chassis that we going to foam. Hope its clear. If you are keen and seriously want to foam it, do pm me /sms me so i can arrange a day with the other workshop to dismantle the cover.
Thanks!

---

Added on October 11, 2011, 1:54 pmYes, RM300 inclusive of both left and right (some 4 beams/some 2 beams ) , and rear beams (some 1 beams, some 3 beams).

A pillar is additional add on for those who want to reduce wind noise and improve stability at the front plus less body flex during emergency braking. Other competitor is doing RM250 for A pillar. And some dont recommend to do it but we will do it according to your preference . Do drop by so i can explain more and you will understand.

You can sms me at 016-6960886 for appointment or drop by when you are free.

This post has been edited by IceCube: Oct 11 2011, 01:54 PM

Would like to check with you on your time availability for Waja do up.
Do PM me

Its BLM bro Kevin...too many customers already is it? hahah....LOL.

foamed my vios + A-pillar just few hours ago, even not fully cured, already can feel the different.

1) steering have better handling ( feel harder), cornering at 60~80km/h also feel stable.

2) Purposely go through bump or hole with higher speed to test, feel more comfortable.

for the sound/noise reduce, still cant feel it yet.

wait for another review after a week. thanks kevin for the good work. ( thumb up)

The BMW E60 had some difference after foaming the undercarriage so please support Kelvin

im still waiting for ur mobile team come up to pg.

Hi bro, please pm me best price for honda city. place for installation and how long does it take? thanks

Daily 10am to 4pm (if come at 4pm will finish by 6pm). Please sms me to confirm your time slot so i can lock it for you. Sms 016-6960886.

BLM kar? Oppss... I tot you is markblueberry *hehe*

Thannks bro. Didnt know you so nearby only! Anything you can drop by and let me know. Thanks for the support!
Your E60 handling improvement eh? Did you intro one guy also E60 to my place?


Hi bro,
Sorry to dissapoint you but currently we are quite busy at the moment. And the team is not ready yet for outdoor foaming. We are still working on it. If you have time, do drop by as its very worth the drive and effort.
I remember I drove to penang purposely just to buy 3pcs Gold arowana there once.
It would take 2 hours plus minus. Pm you the price already. Please let me know the time and date before you come over . Cheers~

Bro, what the rate of doing on a proton Savvy? If make an appointment for Dec is it too early?

Regards

i got some question to ask... better face to face talk about it... kindly pm me yr address... ty =)

Savvy is RM300. Can make appointment first if you really confirm coming even for Dec.

dec is christmas month. so wan become santa clause n give big promotion? hehe

I would love to be the receiving end for all the presents and greeting cards. Jk jk.

bro, how much per bottle?? wanna DIY
thanks

Sorry I dont sell per bottle.[I]

Someone else is selling but in a smaller can of 320ml .With that amount, you need around 7 bottles for undercarriage only and 14 bottles for a full car.

That mean 320ml x 7 = RM70 x 3 = RM490 (I do for you all in labour and stuff only RM300 [normal sedan] , u have to buy masking tape, gloves, acetone and get your garage & hand dirty somemore).

Always remember, more is better then less. What happen if you buy just 3 bottles and ran out when filling half way ? You cant go and cod again with the seller and the thing will be non sticky within 30mins.

Happy DIY!

bro i wanna do this foam under my car what's a piller by the way? where's your location and price range for my car altis 05 ninth generation

A pillar is this one,
refer to the below picture

http://forum.lowyat.net/index.php?showtopic=2035882&hl=

More details at the link. A pillar is the front pillar.

Location also stated on the first post at the end of the posting... here i copy for you.

Office Address: B-0-8, Block B, Jalan 3/144, Megan Pheonix (Behind Pheonix Plaza).
GPS : Longtitude 101° 44' 38.49",Latitude 3° 4' 41.30".
Email : EcoAsiaGlobal@yahoo.com
Maybank: 564856114026 (Eco Asia Global)
H/P: 016-6960886 (prefer SMS if cant reach or no answer)

Direction: : If coming from Leisure mall (Loke yew road/Mrr2), go straight after leisure mall you will pass by Esso and Caltex station on your left, go straight and follow "TMN LEN SEN" signboard. After a sharp 90degree turning, turn left on the first small junction. Go straight and you will see a guardhouse infront of you, (its a small umbrella and table with pole), drive into the guarded area and you will see a motorshop and my shop is just behind that motor shop. Drive to the rear of the motor shop and look for B-0-8.(Block B, Ground floor, lot no.8).

If coming from Counaught (from Federal/Kesas), go straight after you pass counaught Giant/McD (on your right) and follow Tmn Len Sen signboard also. After a sharp 90degree turning, turn left on the first small junction. Go straight and you will see a guardhouse infront of you, (its a small umbrella and table with pole), drive into the guarded area and you will see a motorshop and my shop is just behind that motor shop. Drive to the rear of the motor shop and look for B-0-8.(Block B, Ground floor, lot no.8).

Kevin,
see you on wednesday. Time? i dun knw yet. When you see me, mean have to start doing already.....