i read somewhere before flash custom rom need wipe everthing 1st?
by doing backup on cwm means i alrdy backup and just need wipe la?

i read somewhere before flash custom rom need wipe everthing 1st?
by doing backup on cwm means i alrdy backup and just need wipe la?

bro, why s-on back and wanna s-off and flash again?

btw, i personally feel that leedroid v.1.1 kernel v.1.2 works better than current leedroid v.1.2 kernel v.1.3 on my sensation. not so responsive and laggy..consume more RAM as well..

lee is cooking kernel v.1.4 now, according to his latest post before 9am (his local time). hopefully it will be better..

bdr puteri, giant.. 7-8pm... pm me ur tel no. so i can sms u

@vemp: to s-on, just plug the phone to pc via usb, select charging only. then run the RUU xxx.exe from pc, that's it rite?

STEP 4. WRITE SUPER CID [YOU ONLY NEED TO DO THIS ONCE]- (continue from step 11 below if you have already done this)
(allows you to flash ANY ROM to the device regardless of the carrier. Just click RUU.EXE)

1. Download adb tools here: download for WINDOWS or download for LINUX or from the attachments below
2. On your pc click on your local disk C: Drive (or D: drive for some) (WINDOWS users: Start > My computer > Local Disk ©
3. Create a new folder called "adb" and extract the files from adb.zip into it. Make sure it doesn't create another folder in the adb folder when extracting

4. open command prompt (or terminal for linux) and type "cd" "followed by the path to your adb folder" (windows users can type "cd C:\adb")
5. Ensure your phone is switched on (regular home screen) and connect it by USB in charging mode (Ensure usb debugging is on settings)
6. enter the command "adb devices". This is to confirm your phone is connected. (It should come back with list of devices attached and your serial number)
7. enter the command "adb reboot-bootloader". (nothing further required device WILL reboot in bootloader)

IF it doesn't you can Manually put the phone in the bootloader/hboot mode
Navigate to fastboot by pressing volume down and pressing power button to select (power off > vol down + power on)
It will take you to the fastboot bootloader screen on your phone
Connect your phone via USB
Your Screen should now read fastboot USB

8. enter the command "fastboot oem writecid 11111111"
9. enter the command "fastboot reboot-bootloader (Wait for it to reboot the bootloader)
10. enter the command "fastboot getvar cid" [it should confirm your CID is 11111111]
11. enter the command "fastboot reboot"
12. You can now flash any ROM you like.

To reinstall any stock ROM after this or De-brand or reinstall a different type of Rom (European, Asian, US).
Just click here to download an Official Rom,
Connect to your phone in charging mode. click the "RUU_pyramid_*****.exe" file you downloaded and follow on screen instructions.

I can confirm SuperCID is successful as i just flashed a Tmous Rom (1.25.***) to my EU unbranded device to check. (added t-mobile tv and other carrier stuff to my apps list)


STEP 5 - CHANGING BACK TO S-ON - PROCEED WITH CAUTION READ BEFORE GOING TO STEP 1.
YOU MUST Follow this correctly otherwise you could semi-brick your device. If you follow it correctly YOU WILL GET S-ON SUCCESSFULLY -confirmed by other users
I cannot be held responsible if anything goes wrong but i will help in every situation.
First time i did this with a custom ROM installed - semi-bricked my device (couldn't boot due to security warning as S-on doesn't work with custom roms), restored it using RUU.exe
Second time after S-off i took the following steps and successfully went back to S-ON without any problems and booted up into stock rom.

Confirmed to work by several others as well as myself
1. Follow Step 4 above to get SuperCID - Skip if you already have it
2. Restore your official stock Rom: Just click here to download an Official Rom RESTORE STOCK EVEN IF YOU JUST RESTORED IT RECENTLY OR ARE ALREADY ON STOCK ROM. This is to ensure nothing gets changed in stock for S-on to be successful
So if you are already on a stock ROM or you just went back to stock ROM, i don't care, restore the stock ROM again using the RUU.exe if you don't want to be bricked!

Connect to your phone in charging mode. click the "RUU_pyramid_*****.exe" file you downloaded and follow on screen instructions.
3. Make sure when you download the RUU. download the same or similiar RUU version as your phone came with (e.g. Tmous or EU or Asian etc). As long as you install a stock rom similiar to what you had you should be ok. FAILURE TO DO THIS MAY BRICK YOUR PHONE.

4. Switch your phone on now and let it boot for the first time and just skip through the welcome screen.
5. Go back to Step 4 - SUPERCID and go through 1 to 7 to get to the fastboot bootloader. (so just do what you did before, put adb files in local disk, adb reboot bootloader etc)
6. enter the command "fastboot oem writesecureflag 3" (Thanks Dazweeja)
7. Reboot into bootloader using "fastboot reboot-bootloader" or remove & reinsert the battery and press power on while keeping hold of volume down.
8. Bootloader should now read Pyramid PVT Ship S-ON RL.
9. Remove and reinsert the battery. Press power on as normal

You should now have S-on back and you can return your device or do whatever it is covered again under warranty.

10. IF IT DOESN'T REBOOT and bootloader says ***Security Warning**
Remove and re-insert the battery and go back into bootloader and holding Volume Down +power button select fastboot
11. Run RUU_Pyramid_***.exe to reflash stock rom. (the one u just downloaded in step 1) and then reboot. It should work now

guys, noob question here, how to wipe? use what app?

Ask him the price for yoobao 4800 and 6600mah and if he do postage plz, thanks!!!!     
I do recommend everyone to get 1 battery pack at least... super useful when traveling

If u using ARHD, Where u Download the rom under it got anotehr Download, Name SuperWipe, Download it Put In ur SD Card. Boot Into Revovery, Sellect Install Zip from SD card. then select the super wipe, it will auto run

if other than ARHD, i cant use SuperWipe?

When I bought my sensation the screen protector that the seller gave me didn't cover the entire screen.. Can anyone recommend somewhere to get a good screen protector, and a good quality cover

guys, noob question here, how to wipe? use what app?

bro mana u?

miscall me..meeting fren at kinrara 1st,on my way

When I bought my sensation the screen protector that the seller gave me didn't cover the entire screen.. Can anyone recommend somewhere to get a good screen protector, and a good quality cover