You mean just plug the HID bulb into the original halogen lamp casing ?

yea.. with balast?

H

---

Added on August 14, 2011, 8:38 pmHID need balast together to function.

This post has been edited by JackNg1985: Aug 14 2011, 08:38 PM

,your are welcome, we all here to share. oem struct bar not yet install, still finding source.


chyapp & ckk, if you 2 got the price of oem struct bar please tell here ya, thx.

haha...2molo i'll call mitsu ipoh n see

dont really like UR bar, i dont know who had his cracked b4..at least OEM not so attractive but more assuring

This post has been edited by ckk125: Aug 14 2011, 09:43 PM

hmm... isn't ultraracing got warranty for their struct bar against crack?

It carries a warranty, but arent you pissed that you have to change it everytime??

The crack happens coz at the top of the struts tower, between the 2 screw points, there is a small "bump" that causes the UR bottom to sit on top of it... when you corner your car hard and fast and does it often, the bump will stress the bottom and causes it to crack...

So how many times (and your own time spent) will you claim warranty, esp if it keeps cracking??

Also, UR bars uses only 2 nuts to secure it to the towers, unlike OEM Mitsu's bar that uses all 3 nuts... which is also steel metal (not aluminium) as it looks like a 1in water pipe welded to two O shaped metals...

This is how it looks like, taken from Raibow Kepong site...

This post has been edited by Poadster: Aug 14 2011, 10:00 PM

i always think that ultraracing one is better, you make me feel my choice is better now so bro poadster, you installed oem one?

This post has been edited by nzh0920: Aug 14 2011, 10:03 PM

thanks for the explaination bro..u fit urs with which bar?

All HID needs a ballast to power the bulbs... Eric prices includes bulbs, ballasts and wiring...

Guest786: I am using 6000K bulbs for both lo beam and fogs... you can change the hi beam to HID too, but you will need to drill a hole thru the casing to pass the HID wires thru, thats y i didnt HID the hi beam too...

Flyaudio also uses china components wrapped inside a "brand", granted you do have much more features such as touch screen, DVD playback, AV input for reverse cams, GPS, BT... but even Flyaudio SQ is worse than stock Clarion HU, and it costs way more.... for the 2K++ china HU, I can get Pioneer RS P90 or Alpine 9887, and Flyaudio will cost you Rm1K more than the china HU....

In the end, its to each his/her own preference, and most importantly, their own money and how they wanna spend it...

---

Added on August 14, 2011, 10:13 pmI am using an unbranded alloy bar + 3 nuts secure type.... bought from Rainbow too...

This is how it looks like....

Didnt get the OEM ones coz even if its functional, it looks way too cheap, like how I described it... a 1in water metal pipe welded to 2 O rings...

This post has been edited by Poadster: Aug 14 2011, 10:18 PM

Poadster u also purchased from eric? For the low beam & foglight just pnp rite? No need any wiring isn't? So the warranty wont void

---

Added on August 14, 2011, 11:12 pmAnd poadster are u using oem mitsu strut bar? How is it?

This post has been edited by Guest786: Aug 14 2011, 11:12 PM

i believe u need to rewired if HID ..
the original connector will need to connect to the ballast and the ballast to the HID bulbs

Guys where can get the hood damper?rhose left and right one? What brand u all recomend? Is it worth it and practicality compare stock 1?

---

Added on August 14, 2011, 11:22 pmi believe u need to rewired if HID ..
the original connector will need to connect to the ballast and the ballast to the HID bulbs

So how bout warranty inspira?

This post has been edited by Guest786: Aug 14 2011, 11:22 PM

As mentioned earlier, installing HID does not void any warranty, they are plug and play items, IF you need to claim the warranty for your headlamps, then before you go, just remove the HID bulbs n ballast, reconnect the ori connector to the halogen bulbs and nobody will ever know you have fitted a HID before, as there is no wire cutting involved.

This post has been edited by SothysSaleShop: Aug 14 2011, 11:28 PM

Tq sothysaleshop, oh poadster u using cidep. How's performance wise?

Anyone here got latest badge inspira without wiremesh for tweeter?does the wire for plug tweeter exist inside the door trim?anyone got checked?

No wiring work needed, as explained by Sothys...

Your existing power wire plugs to the ballast, and the ballast wires plug to the HID bulb.... and you keep your existing bulb.... and if you need to claim warranty, just remove the HID bulb and re-use the ori bulb, and directly plug the ori existing power wire to the bulb....

Not a single wire was spliced or cut.... these are the new HID, unlike the older ones where you need to cut the ori power wire to mod to the ballast...

Guest786: Inspira dont come with the hood dampers, and its actually hood hydraulic lifters and not dampers... the main purpose of the hydraulic lifters is to lighten the "lifting" part, and to keep the bonnet up without using the metal bar to hold it up.... but you will still use the metal as double security as you dont want the bonnet to "slam" down on your head....!!

So the hood hydraulic lifters are not really needed, you still need to lift the bonnet all the way, albeit it being lighter now... technically you can lift the bonnet halfway and let the hydraulic lifters "push" it up, but you dont wanna let it "swing" up as you dont want to loosen the bonnet screw/nut, right...??

So, its a fun and nice to have add on, but not essential... but not that cheap at RM170 per pair... my European branded car front and back pair (4 pcs total) costs the same... so who says conti car maintenance and parts is more expensive than Asian car parts..??

---

Added on August 14, 2011, 11:44 pmThe struts works the same as how a front struts should... it holds the steering tighter during corners, and you get better control and feedback... I dont really care of the brand, more the function...

The wiring for the tweeters are still there, its taped to the body and its green and white wire set...

This post has been edited by Poadster: Aug 15 2011, 01:10 AM

how much is the whole set of hid system?

Tq poadster u are really the master in explanation!!

Try contacting Eric here... his price is RM150 per pair.... installation is extra...!!

And Inspira uses 9006 (low), 9005 (hi) and H11 (fog)...

---

Added on August 15, 2011, 1:23 amPls dont mention it, you asked politely for help... am glad we here can and have helped you with information...

This post has been edited by Poadster: Aug 15 2011, 01:23 AM

I will get CIDEP too because of I think the design quiet nice but I don't know how heavy it is and how strong it is. According to ckk125 he will contact the Mitsu to get info the OEM front strut bar. Im waiting the good news hehe.

Poadster, what VS are you using?Is it really effective of our car? And this weekend im planning to go COE to buy sunglass holder, anything else accessories that I missed-out which PNP to our Inspira?
As I know sunglass holder only from Proton that we can buy,other accessories (can fit to our Inspira) not sure.