Sorry
the application USB (process com.motorola.usb) has stopped unexpectedly. please try again

how to solve?

not sure.. never had this error b4.. why dont u reflash? might solve the problem

thanks!

no problem.. glad to be a help

er... why MIUI auto set My CPU to 1Ghz? how to set it back to 800mhz?
did MIUI eat more battery?

Seriously disappointed with my MIUI's camera...
When 1st time get it, the camera used to be darn good, after flashing it, it is as worst as my old 5800camera....
Someone suggested me to update to the latest MIUI, does it fix the camera problem???
Any input please?

I think I messed up my Defy

Tried CyanogenMod last weekend. Wasn't happy with it. Then flash back to Miui. But my Defy now stuck at Motorola logo.

I flashed to Miui using the usual step:
1) wipe data
2) wipe cache
3) install miui
4) reboot

Usually after flash the first boot will take a few minutes. But this time it stuck at the Motorola logo for an hour. I think my batery also dying. What do I do now?

read properly before u flash. its 1ghz in default setting for official miui rom.

flash full sbf again, then:
wipe data
wipe cache
advanced>wipe dalvik cache
install zip from sd card
reboot

u r using which rom before u go into your 1st miui rom? and which cm rom u flashed?

i like MIUI very much but a bit concern about bery life since it OC my CPU to 1Ghz...
and i just know about setCPU.... can somebody teach me how to set my CPU back to 800mhz?

from my read http://forum.xda-developers.com/showthread...=866197&page=10

what mean by 1ghz/56vsel?

for vsel, is it lower value = less battery use?

---

Added on October 17, 2011, 2:01 pm so how to make it 800mhz back?

This post has been edited by adie82: Oct 17 2011, 02:01 PM

1) Stock defy
2) Full SBF for SEA 15 - OFFICIAL RE-RELEASE! 3.4.3-36-1.7
3) MIUIandroid (1.8.xx to 1.9.xx to 1.10.14)
4) CyanogenMod 7.1
5) MIUIandroid 1.10.14

when blue led flashed, press vol-. can u go to bootmenu?

looks like u need to reflash full sbf

---

Added on October 17, 2011, 2:26 pmmaybe u wont get the smoothness of miui if drop to 800mhz?
cant help much coz i m not miui user

This post has been edited by yweising: Oct 17 2011, 02:26 PM

me use my old CSL Spice charger.. faster than stock moto charger.
no problem so far

ok.. test drive 1st before need to set CPU back to 800mhz.... but with MIUI 1ghz i can feel my defy a bit hotter than before!

Yes. Still can.

I tried. Used the guide from the first post in this thread. I highlighted the steps where I faced problems.

3. Erase Data and Cache [MUST DO! SERIOUSLY, YOU MUST DO THIS!]
- Turn of your phone,
- Press and hold Power+Vol.down until android logo appears
- If you previously on Eclair, press right bottom corner of the screen to get the menu
- If you previously on other Froyo build, press Vol.up+Vol.Down simultaneously to get the menu
- Navigation button: Vol.up and Vol.down | Action button: Eclair, use the touchscreen. For Froyo, use power button.
- Do Wipe Data, wait until it's done
- Then Do Wipe Cache, wait until it's done
- Choose Reboot system, BUT IMMEDIATELY JUST AFTER YOU choose reboot, press and HOLD Vol.Up for 5 seconds and release
- You are now on bootloader <<-- How do I know I'm on the bootloader?

4. Flashing the SBF File to Your Device:
- Open RSD Lite 4.9 from your computer desktop shortcut, then click browse button [...] to open the SBF file
downloaded files usually is .7z or .rar, PLEASE extract it first to open
if your computer can't open SBF files, try to shorten the SBF filename, and don't put it on folder, try put it on outside like D:\ or E:\
- Connect USB cable to your device, if it's the first time to flash SBF file, WAIT untill all the drivers properly configured <<-- RSD Lite never detect my Defy no matter how long or how many times i re-insert my Defy
- In RSD Lite 4.9 window will recognize your device, it will says connected. If don't, try to pull cable and plug it again until it's connected.
- Click Start button, wait the process, it takes 7-10 minutes
- When all is done and ready, RSD Lite status will shows "Finished" and Result="PASS"
- You are on official South East Asia Froyo 2.2.2!!

1. Bootloader >>>
2. redownload latest version of RSD? disable antivirus? update usb driver?

I see. In that case, I did NOT manage to get in the bootloader

power on + vol up cant bring u to the picture?

This post has been edited by yweising: Oct 17 2011, 03:24 PM