Who says cannot?

First of all you need to kaotim with the bengkel and must bring replacement parts. Exp: taking out the meter, you need to bring another similar meter

Normally what ppl do is they just take out the performance parts and replace it with stock parts...

That's the reason why i want the meter and aircond vent hole only coz im using LMST as well.

If you dont do it, other bengkel people sure will sapu your bro car parts....

---

Added on June 12, 2011, 12:18 pmDoors cannot la bro unless same color

This post has been edited by Notoriez: Jun 12 2011, 12:25 PM

You just need to bring me there and talk to the bengkel owner...i'll pay for everything and do the dismantling job...

---

Added on June 12, 2011, 11:29 pmNot sure bout the latest model meter (no blue light)...

But the 2004 model do have the rev limiter light (activate @ 7k), buzzer sound when overheating and light is switch on when key has been taken out..

---

Added on June 12, 2011, 11:31 pmAs we discussed before, just try to source for 2nd PZ extractor which gonna cost around RM200-250. Just ensure there is no crack or additional welding (means got crack before)...

Then 1.7 full piping size (crushed bend) would be around RM170-200.

Mandrel bend is around RM400

This post has been edited by Notoriez: Jun 12 2011, 11:31 PM

If PZ offer mandrel bend pipes then it's worth it...if normal crushed bend, any ah seng, ah beng shop would do....

Go google what is the diff between mandrel and crushed bend..

However i dont think PZ offer mandrel bend piping..

Sure or not? Do you know how to differentiate betweel mandrel and crushed? I think it's the extractor only not the whole piping....extractor should be mandrel bend especially those branded ones.

Redline yes...proven on balancing machine...

Others, like some people says, there are no such thing as good cheap things

But in the end of the day, just spend what do you think is worth it la....i got my Mythelogy @ bargain price...pasang trus no problem unlike the another brand, used for one month also still noisy in the end kasi scrap to other people

---

Added on June 17, 2011, 3:16 amNope you never offended me

Hope you let us know the results ya...

This post has been edited by Notoriez: Jun 17 2011, 03:16 AM

Common problem with our engine la...some more if you are a high revver...

As long your semi engine oil can last to 5k after top up is more than good enough.

You don't want your oil to evaporate so fast? Use 50w series oil...that will last you long...malas to elaborate but i used full syn oil on my car and change every 5k due to fast evaporation. But when i used Mobil 1 full syn 5-50w, can last till 7k

Only thing bout 50w oil is a bit heavier, so you will feel your engine hard to rev...but still feel smoother for Mobil 1 oil

And as for LCP, trust me it will only help you to achieve better mileage when switching on aircond as it lessen the compressor load at least 90% (for undersized LCP)

Click the link on my sig...elaboration has been done there...

---

Added on June 19, 2011, 12:19 pmput la...dun blame us if got something wrong happen

---

Added on June 19, 2011, 12:20 pmLucky no people under ur car

This post has been edited by Notoriez: Jun 19 2011, 12:20 PM

Sent you PM

What do you expect? RM1k-2k?

If you don't want then is ok. Let the bengkel shop kaotim all the parts instead helping your fellow forummers

Why airfilter cover full with karat one..

My one always look very bling

I think Under5 gave better package (definitely more than 4 runs) till you satisfied. Around that price as well...

Too bad to hear that bro...

It seems some knocking and repainting would do...i know a place where can help you to kaotim all @ one time. Estimated cost RM300. Why? Have to paint back whole bumper, bonet and fender

I know people mah

---

Added on June 29, 2011, 3:04 amdepends on what BAR being installed...

just to let u guys know, for our cars the front strut bar is utter useless why? our chassis is too lembik...just for decoration purposes...

Just get side bar, fender and anti roll bar..this would satisfy most Saga/Iswara owners..

Total costs? Side Bar - RM300 with installation, Fender - RM250 with installation and anti roll bar - RM300 with installation @ UR coz need welding

This post has been edited by Notoriez: Jun 29 2011, 03:04 AM

Quite familiar with this story..

That's why i wont use pariah tyres anymore. Period

---

Added on June 30, 2011, 5:49 amDIY lo...

Get KR8ZV or Sid to help you out...they are used to removing their bumpers

This post has been edited by Notoriez: Jun 30 2011, 05:49 AM

Reached 200km/h tonite...

All Zaini, Sid and Yewwing punya pasal...say 140km, in the end tekan till dunno go holland

If you can find the answer...please do let me know...

I guess ex-accident Sagas will have this problem...

---

Added on July 4, 2011, 11:01 pmSeriously mau whack...

But with good suspension, chassis strengthening bars and tyres would really make our cars STABLE @ 200km/h...seriously like driving heavier sedan cars like Persona

This post has been edited by Notoriez: Jul 4 2011, 11:01 PM

Go to SagaIswaraClub (SIC) website and try your luck there looking for 2nd ones...if not most, majority kaki Fiore so the behind part kasi scrap only...

And it's quite easy to remove the side mirrors...kasi bukak few screws...kaotim...

For the price and the amount of power gain, really not worth it

RM30-50 still can consider even though it's a 'BRANDED' performance product...

Sudah pakai no need waste money...wind noise la...squeaking noise can kaotim quite easily

I am using Michelin PS3...so how? And i know how to differentiate between wind noise and tyre noise..

My car almost quiet when crusing below 100km/h. but upon reaching the speed, no need to say la...much more louder on driver side. Maybe because i crashed twice on the right side before...

As for squeaking noise, just find the root cause and tighten the screws, spray WD40