Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 > LYN Proton Saga/Iswara Drivers' Forum! V24, Still running strong as seen on the road

views
     
fool1988
post Sep 21 2011, 04:00 AM

On my way
****
Senior Member
581 posts

Joined: Mar 2008
From: Singapore / Johor Bahru
QUOTE(Kel89 @ Sep 20 2011, 08:46 PM)
The papan that allow outside air? hard to imagine which? haha. What did u use to block it?Do you have to open the hud to do that??

Btw where do u get the cable tie?  smile.gif
*
U know where is Blower or not? Just under left side dashboard. After u dismantle the dashboard u should able to found the thing like picture below. The one with span. Figure out a method to made it close nicely, normally outside smoke will enter because that one loose already and cannot close nicely. Actually i was seldom (never) allow outside air to entering my car so i just unplug the cable that hook the papan and use cable tie to lock it tight. Imagine is useless, open it and figure out a way urself, main purpose is to close the thing tight, method is depends.

user posted image
[kuaLe]_AGX
post Sep 21 2011, 08:48 AM

Getting Started
**
Junior Member
241 posts

Joined: May 2010
From: Vinovo
QUOTE(shahiryusoff @ Sep 19 2011, 03:32 PM)
Guys, want to ask regarding my car as the picture below.
[attachmentid=2442810] (Driver Side)
[attachmentid=2442811] (Passenger Side)
Does anyone/sifu know why is the passenger side tyre is like more offset or "terkeluar" ? You can really see that the passenger side tyre is more coming out. It is very obvious.  This is the front passenger side tyre. Rear both tyres are okay.

I think that the driver side tyre is okay but there's like some problem with the passenger side tyre. Anyone has had this problem or know why is it like this? Is it the CHASSIS bengkok ? The salesman who sold this car told me that this car has never been in an accident before so I guess it's not the chassis.

icon_question.gif HELP please.  blush.gif

*
this car using stock 13" rims @ 14" rims?

Its the same with my car. And im using 15" rims...the passenger side tyre "terjojol" more obvious..
But my car can go straight without holding the steering no problem
low yat 82
post Sep 21 2011, 02:35 PM

time is nearing to end
*******
Senior Member
4,081 posts

Joined: Aug 2005
to all bro..if given option, which 1 shud u upgrade 1st?

1. suspension (stiffer absorber) + brake pads + yada yada
2. sport rim + tyre + lowered spring+ yadayda
3. UR bar + yadayada
[kuaLe]_AGX
post Sep 21 2011, 03:15 PM

Getting Started
**
Junior Member
241 posts

Joined: May 2010
From: Vinovo
QUOTE(low yat 82 @ Sep 21 2011, 02:35 PM)
to all bro..if given option, which 1 shud u upgrade 1st?

1. suspension (stiffer absorber) + brake pads + yada yada
2. sport rim + tyre + lowered spring+ yadayda
3. UR bar + yadayada
*
sport rim is a must for me, suspension (absorber/springs)....depends
DSV4600
post Sep 21 2011, 03:18 PM

Casual
***
Junior Member
432 posts

Joined: Dec 2010
QUOTE(low yat 82 @ Sep 21 2011, 02:35 PM)
to all bro..if given option, which 1 shud u upgrade 1st?

1. suspension (stiffer absorber) + brake pads + yada yada
2. sport rim + tyre + lowered spring+ yadayda
3. UR bar + yadayada
*
Depends on your budget and what parts are already badly worn out lor...
If it's still new or in good condition, better use them till kopak first mah...
Peekab0o
post Sep 21 2011, 03:42 PM

New Member
*
Junior Member
5 posts

Joined: Dec 2009
QUOTE(low yat 82 @ Sep 21 2011, 02:35 PM)
to all bro..if given option, which 1 shud u upgrade 1st?

1. suspension (stiffer absorber) + brake pads + yada yada
2. sport rim + tyre + lowered spring+ yadayda
3. UR bar + yadayada
*
If wanna change tyre... recently theres this Kumho Ku31 model poison brows.gif google it ... Cheap and Good tyre 15" rim prices are below RM 200 / pcs ...
Lowenkreuz
post Sep 21 2011, 04:10 PM

New Member
*
Newbie
0 posts

Joined: Apr 2011
upgrade your brake pads first! iswara brake is very paliah in my opinion.... T_T
If no skill like me, the brake will fade and lock easily, thus increasing the already long stopping distance.
lyordson
post Sep 21 2011, 04:11 PM

New Member
*
Newbie
0 posts

Joined: Apr 2011
From: outerheaven
peekaboo, when u bought the block, it include what parts? pistons, conrod, etc etc?
low yat 82
post Sep 21 2011, 04:38 PM

time is nearing to end
*******
Senior Member
4,081 posts

Joined: Aug 2005
QUOTE(DSV4600 @ Sep 21 2011, 03:18 PM)
Depends on your budget and what parts are already badly worn out lor...
If it's still new or in good condition, better use them till kopak first mah...
*
all those options i list out will b around rm8xx each.. all my suspension n brake r still in good condition means no rosak.. mayb upgradin UR is better choice??

QUOTE(Peekab0o @ Sep 21 2011, 03:42 PM)
If wanna change tyre... recently theres this Kumho Ku31 model poison  brows.gif  google it ... Cheap and Good tyre 15" rim prices are below RM 200 / pcs ...
*
huhu... if i choose 2nd option, i jus take any 2nd hand tyre lo... sweat.gif sweat.gif


QUOTE(Lowenkreuz @ Sep 21 2011, 04:10 PM)
upgrade your brake pads first! iswara brake is very paliah in my opinion.... T_T
If no skill like me, the brake will fade and lock easily, thus increasing the already long stopping distance.
*
ooo... not sure la.. but think its better than saga blm? coz last time i tried b4... when rainin heavy, i drove saga blm at around speed like 60kmh, then sudden brake coz front car stopped. kanasai, d saga blm tyre look up..somemore liek go left n right... i was like wtf. 1st time like this. its on new car! my saga lmst seems better, never lock up, but can really feel d brake is not enough powaa..lol
fool1988
post Sep 21 2011, 04:48 PM

On my way
****
Senior Member
581 posts

Joined: Mar 2008
From: Singapore / Johor Bahru
QUOTE(low yat 82 @ Sep 21 2011, 04:38 PM)
if i choose 2nd option, i jus take any 2nd hand tyre lo...  sweat.gif  sweat.gif
*
Second hand is simply over RM120. Why not buy New if new was low than Rm200.
Peekab0o
post Sep 21 2011, 05:11 PM

New Member
*
Junior Member
5 posts

Joined: Dec 2009
QUOTE(lyordson @ Sep 21 2011, 04:11 PM)
peekaboo, when u bought the block, it include what parts? pistons, conrod, etc etc?
*
Yah... pistons conrod everything are the internals in the block...


@lowyat 82 ...

2nd hand tyre i won't take the risk buying it ... Tyre's / Brake are part of our life too ... i won't wanna risk my life for it ... and kumho ku31 for 15" a new piece is only Rm 190/pcs ... Google round the reviews... 9/10 will give u good feedback about it ... It's just that this brand are not so famous yet in Malaysia ... Same goes for Hankook ... It wasn't that expensive / famous when it 1st came in ... but now ... Rm 240/pc i asked ... for the same size... but cheaper one's perform same / even better ...

Soon when this become famous ... Prepare the price hike cry.gif

This post has been edited by Peekab0o: Sep 21 2011, 05:12 PM
lyordson
post Sep 21 2011, 05:33 PM

New Member
*
Newbie
0 posts

Joined: Apr 2011
From: outerheaven
QUOTE(low yat 82 @ Sep 20 2011, 10:04 AM)
source from br clutch
+1  nod.gif
more info la.. dun write 1 line niaaa
dunno bro. but, u really need dat big rim??
*
i dont understand. i just want a comparison.. sweat.gif


This post has been edited by lyordson: Sep 21 2011, 05:33 PM
shahiryusoff
post Sep 21 2011, 06:46 PM

Casual
***
Junior Member
487 posts

Joined: Dec 2006
QUOTE(kuaLe_AGX @ Sep 21 2011, 08:48 AM)
this car using stock 13" rims @ 14" rims?

Its the same with my car. And im using 15" rims...the passenger side tyre "terjojol" more obvious..
But my car can go straight without holding the steering no problem
*
I'm using 14" sport rims.

My car also can go straight without holding the steering. blush.gif


How much is it roughly to change/repair the meter? I think i want to just change the whole meter panel. Fuel gauge and RPM already crazy. See the meter move also can vomit. biggrin.gif
low yat 82
post Sep 21 2011, 07:36 PM

time is nearing to end
*******
Senior Member
4,081 posts

Joined: Aug 2005
QUOTE(fool1988 @ Sep 21 2011, 04:48 PM)
Second hand is simply over RM120. Why not buy New if new was low than Rm200.
*
ya meh... i search search all sport rim pcd 114.3 14" / 15" wit tyre is roughly rm600-750. d bunga is range from 50% - 90% ooo

QUOTE(Peekab0o @ Sep 21 2011, 05:11 PM)
Yah... pistons conrod everything are the internals in the block...
@lowyat 82 ...

2nd hand tyre i won't take the risk buying it ... Tyre's / Brake are part of our life too ... i won't wanna risk my life for it ... and kumho ku31 for 15" a new piece is only Rm 190/pcs ... Google round the reviews... 9/10 will give u good feedback about it ... It's just that this brand are not so famous yet in Malaysia ... Same goes for Hankook ... It wasn't that expensive / famous when it 1st came in ... but now ... Rm 240/pc i asked ... for the same size... but cheaper one's perform same / even better ...

Soon when this become famous ... Prepare the price hike  cry.gif
*
lol. if choose option 2, d main objective is to get sport rim...tyre condition next time onli care..lol.

btw, how come i see some car disc brake rotor, already rust? how come a? mine like clean clean 1? hmm...

QUOTE(lyordson @ Sep 21 2011, 05:33 PM)
i dont understand. i just want a comparison.. sweat.gif
*
ab wat?
fool1988
post Sep 21 2011, 07:59 PM

On my way
****
Senior Member
581 posts

Joined: Mar 2008
From: Singapore / Johor Bahru
QUOTE(low yat 82 @ Sep 21 2011, 07:36 PM)
ya meh... i search search all sport rim pcd 114.3 14" / 15" wit tyre is roughly rm600-750. d bunga is range from 50% - 90% ooo
*
I think that really depend. Based on my previous experience even they claim the bunga is still 50%-90%..when u saw than will be doh.gif
But for sure u can get a sport rim with bunga around 90% with Rm600-750..but they base on ur luck and timing. smile.gif
P/S: Actually i looking 15" sport rim with bunga more than 70% around that price, any link? brows.gif
yewwing
post Sep 21 2011, 08:09 PM

Casual
***
Junior Member
392 posts

Joined: Sep 2007
From: Some where in Malaysia
QUOTE(low yat 82 @ Sep 21 2011, 02:35 PM)
to all bro..if given option, which 1 shud u upgrade 1st?

1. suspension (stiffer absorber) + brake pads + yada yada
2. sport rim + tyre + lowered spring+ yadayda
3. UR bar + yadayada
*
i will go for sport rims + tyre first if i want to upgrade smile.gif
then go for UR bars thumbup.gif

Added on September 21, 2011, 8:14 pm
QUOTE(low yat 82 @ Sep 21 2011, 07:36 PM)
ya meh... i search search all sport rim pcd 114.3 14" / 15" wit tyre is roughly rm600-750. d bunga is range from 50% - 90% ooo
lol. if choose option 2, d main objective is to get sport rim...tyre condition next time onli care..lol.

btw, how come i see some car disc brake rotor, already rust? how come a? mine like clean clean 1? hmm...
ab wat?
*
brake rotor can easily get rusty even it is new after there is contact with water, the rust will automatically clear off once u start driving around smile.gif

This post has been edited by yewwing: Sep 21 2011, 08:14 PM
lim47
post Sep 21 2011, 10:05 PM

Regular
******
Senior Member
1,210 posts

Joined: May 2005
From: Selangor
Hi guys,its rainy season .Any one of you experience water leak into boot on LMST? which part to seal? side lamps or reverse light cover inside? sweat.gif sweat.gif

Thanks in advance.
Peekab0o
post Sep 21 2011, 10:22 PM

New Member
*
Junior Member
5 posts

Joined: Dec 2009
QUOTE(lim47 @ Sep 21 2011, 10:05 PM)
Hi guys,its rainy season .Any one of you experience water leak into boot on LMST? which part to seal? side lamps or reverse light cover inside?  sweat.gif  sweat.gif

Thanks in advance.
*
Not only LMST iswara/saga aeroback version always have ini miaa problem 1 ... brows.gif seal where ah... wait sifoo reply notworthy.gif
lyordson
post Sep 21 2011, 11:40 PM

New Member
*
Newbie
0 posts

Joined: Apr 2011
From: outerheaven
QUOTE(low yat 82 @ Sep 21 2011, 07:36 PM)
ya meh... i search search all sport rim pcd 114.3 14" / 15" wit tyre is roughly rm600-750. d bunga is range from 50% - 90% ooo
lol. if choose option 2, d main objective is to get sport rim...tyre condition next time onli care..lol.

btw, how come i see some car disc brake rotor, already rust? how come a? mine like clean clean 1? hmm...
ab wat?
*
the clutch
ziggy87
post Sep 22 2011, 01:25 AM

nom nom nom nom nom nom nom nom nom nom
******
Senior Member
1,519 posts

Joined: May 2006
From: madness city
yo guys..saga iswara carbie owner too..very very stock 4g13

but now got problem..

car can start, can idle. but once start revving, when engine slows down, straight mati.

very light revving can continue idle, like very slightly above 1k rpm revving. it will still slow down more than idling rev, but wont mati.

what's the problem ah? cant go work tmr..now very dangerous to drive. have to start engine everytime wanna start moving after stop.

reliable mechs nearby PJ SS2?

sifu sid, do u do on-site? haha
« Next Oldest · The Fast & The Furious · Next Newest »
 

126 Pages « < 84 85 86 87 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0353sec    0.91    6 queries    GZIP Disabled
Time is now: 18th December 2025 - 01:10 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.