Refering to HERE (The gallery which I wanted to see the I/O panel)
DA5000 Pro can accept both stereo or 5.1ch input.
Ur device must able to output 5.1 in order to utilize it by connecting to 5.1ch input. If your devices have only stereo output, just connect them to PC (Left/Right for White/Red with RCA cables). You can find exactly the same looking port somewhere around your TV with both red and white audio output. If your TV has 5.1ch output which is quite rare.
Referring to HERE, PS3 can output 5.1 via HDMI. If your TV can handle 5.1audio and accept HDMI input, you may use your TV to decode the digital signal and transfer the audio signal to ur speaker. You'll be connecting your PS3 to TV's input and then output audio from your TV. Maybe you should wait for some DA5000 pro owner here to give comment. If u're just using the Stereo Input on DA5000 Pro, I'm not sure whether the speaker is capable of upscaling 2.1ch to 5.1ch to play on all satellites though.
Afterall, just something from me. Need experts to clarify it as it's 5.1. If it's 2.1, just simply connect through RCA or from 3.5 out to RCA for left and right only. 5.1 got Front/Rear/Center/Sub which is more of a mess xD.

Thanks for the insight IwanAGP.

This means that i would need to get an amplifier that has HDMI to support 5.1 input. am i right?

I have no experience in getting amplifiers. What is the cheapest one i can get with 5.1 and HDMI support??

nope... you don't need amplifier as DA5000PRO alone inside already have amplifier

you need a DAC (Digital to Analogue Converter)

Yea... if you get another amplifier, your DA5000 Pro might "explode" JK but it will spoil. Why don't you just connect ur ps3 to TV and output audio from TV? LCD/LED tv nowadays mostly got HDMI input which these tv will decode the av digital signal from input.

But that would means that i have no use for my DA5000 pro?? I connect my PS3 to TV and then i want the audio from the TV to output to my speakers. Where can i get this Digital to Analog converter??

---

Added on May 29, 2011, 6:18 pmIs there a DAC for 5.1??

This post has been edited by zeropulse: May 29 2011, 06:18 PM

what a Amp does for PC Speakers?
and
where can i get AMP for PC speakers?

Can i Use a 5.1 DVD Player to connect HDMI to TV and output sound via DVD player like those home theatre?

If you're not connecting your PS3... Yes... But ur speaker is connected to the DVD player instead of TV. There will be something weird. Sometimes, ppl is used to switching off TV in which when the display is gone, your sound is also gone. If you output via DVD, you switch of the TV, not the DVD, the sound still going on. Lol~ I really think rarely got 5.1 output on TV la. Look at THIS. Maybe something that you want but it should be quite expensive. Let other sifus help you out. gtg packing~

That's an AV Receiver. IT is expensive. haha.
Thanks, But that's is the current setup of my home theatre. When TV not on but DVD on, then got sound. Lol. maybe will try that way cause I dont mind as long can output 5.1


This post has been edited by zeropulse: May 29 2011, 11:16 PM

Then?? How about other decoders? Astro? ... ... All sound output from TV arh?

My home astro also go through home theatre. But now my setup is use with PS3 and Laptop only. should be fine kut.

try finding in the audio sales section, look for desktop amp or just amps, they generally increases bass power and clarity of the speakers, "lower volume on amp" will still give u near equal "higher volume loudness without amp"

most PC speakers already have built-in amp so it pumps out power to your speakers. that's why you plug your active PC speakers to wall electricity outlet. if you add another amp, it will overheat the PC speakers built in amp as it try to process amplified signal even further. in long term probably will damage or burn the built-in amp.

Got myself an S330 for about 2 months now. I thought i read somewhere that the wired remote powers down the speakers. But when I got mine, it didn't do that. I thought never mind, maybe it's only for the S330D.
But then today I came across the same article about the remote, and i started to dig out more info about the remote. So now I'm really bugged.

Does the remote for the S330 also powers on/off the speakers? Is my remote defective?
Can I go to the service center and just have my remote replaced or do i need to bring in everything?

Thanks in advance.

I recently bought the HCS2330. The speaker is great but it dosen't save my settings I set for bass and treble. It always reset when off. Is it like tat?

Yes, theres a trick to avoid it but cant recall how's the method. Wait for someone who know how to do it to show up

Or just do like me, dont turn off the speakers

If i'm not wrong... that trick is for C3 right? Mute then power off. I think they said it b4.

What is the difference with Edifier M1310 and Edifier M1335?
Kinda curious~

This post has been edited by zhihao4456: May 30 2011, 10:06 PM

it's for any Edifier speakers with the epic blue LCD screen only
like
-S530D
-S730D
-S550
-C5
-HCS5640

---

Added on May 30, 2011, 10:25 pmextra radio function?
and slightly more expensive

This post has been edited by power911: May 30 2011, 10:25 PM

I still don't get it. How can I utilize DA5000 Pro surround sound with PS3? Definitely need an AV Receiver?