Are you sure? Personally I think E3100 bass is overwhelmed but is not muddy. My roomate brought it here when it first arrive. Totally cover my M1335 bass. Bass can be heard even at low volume on E3100 but not M1335.

I don't feel it being muddy though. Maybe I don't think that while it is.
and yeah... It must be tuned down, which my roomate didn't think so. When he got that here, he got the bass knob on max, even though volume isn't max. The bass from it is that annoying until I asked him to tune it down. It's overwhelmed that it covers mid and highs.

Lolz... Kena clipped? Hmm...

No matter 360 390 or 410 it's still quite valued compared to other brands. You get nice solid thick awesome superb incredible MDF housing (including my RM109 M1335) for nearly entire series of Edifier. There are models that are not made of MDF though.

MOREEEEE WATTS to shake your house

I use M3400 for my TV I also think more than enough d xD RM14X only~

Speakers are sensitive to position changes. No?? Only those home theatre designed for big space is less sensitive, I mean less, still got the sweet spot for best experience la xD I don't know where I read something about this. Whatever~

Maybe next time they should specify in manual the placement of the speaker and the sweet spot for it

Eg:
Distance from wall
Height of speaker
Separation distance of speaker
Relative position of subwoofer to satellites
... ... ...

*You know I'm just trying to make some fun stuff here *

Me based on my laptop, speaker facing right front as I'm putting my laptop just in front of my speaker (both subwoofer and satellite) Laptop on the floor with cooler, subwoofer and satellite on the same level of my "entertainment centre" (Bought from jusco. Nice naming. Just something like a coffee table big enough just to do homework and put my laptop+ some books/wallet on it. Double... storey?? Subwoofer on the lower one but when I put my laptop on the floor, in front of my tilam, i will place satellites at the same level too.)

Basically just

___ ___

___		___

L R
================
Lappy Screen

Nice drawing right?? Satellites line cannot straight. Don't care le.
Just about 2~3 cm from each side of my laptop screen. FYI, a 15.6" Laptop.

---

Added on November 10, 2011, 6:13 pm== LYN cut all my spaces. ~~ Lazy edit

---

Added on November 11, 2011, 9:34 pmJust tried, both M1335 and my laptop speaker. No problem hearing the separation L, Middle then R. M1335 satellites are just half meter away from each other. My laptop, about 33 cm distance from L to R

This post has been edited by IwanAGP: Nov 11 2011, 09:34 PM

M1335 will give you moarrrr power, louder perhaps.
M1360 is too small for me. 8.5w RMS only.

Actually it depends on your usage. Do you need volume? Sound quality wise, all 3 should perform about the same. X220 got 22w RMS but no remote. Consider remote if you want to place the subwoofer on the floor or wherever.

M1335 is the oldest of the three. I'm using it. Bought it @ RM109 with 2 years warranty. No shop offer this price now and it's quite hard to get. Even if you get it, it's old stock. It's replaced by M1380 I think...

Another thing, M1360 has downward firing subwoofer. The driver unit is exposed. Never try it before though but I believe edifier won't perform below par at its price. You should really try them out at lowyat before buying. Choose some time when lowyat is not crowded and noisy so that you can listen clearly to those speakers.

M1335: More power (30w), worst in design though, Got remote with headphone jack, old model(doesn't mean not good but maybe not that easy to get)
M1360: Least power (8.5w), for small setup/personal use, cranking up the volume won't fill up a small room I think, downward firing sub, extremely light(i think i held it before and I'm shocked... Small and really light.) Don't expect too much from this, No bass knob(don't think you'll need one too)
X220: 28w, look nice but the cotton layer(cotton? whatever), in dusty place(complaining my condo here... super dusty due to nearby construction site. Need to "brush" my M1335 satellite once in a while) collect lots of dust (even subwoofer got that layer of thing), NO REMOTE (if you're that type of person who loves to control volume from PC/laptop, not a big problem-I love to rotate the button on Edifier remote xD), there's only ON and OFF button for bass(not sure how this works...)
You should go and try them out. Based on ur budget and personal preference, do the purchase. Maybe you should look into certain models with Separate midrange and tweeter instead of full range. Based on my experience on my M1335 and M3400, it does really matter. M3400 gives me a lot more details compared to my M1335. Nevertheless, both these speakers live up to standard for the price I paid.

OMG... Found out that both Edifier speaker I got are discontinued
They're still nice for me though

Volume and all the ports are at the side

Unless edifier.ca pics lied to me

Bass head you better stick back to Logitech

Normal for edifier right...
Thought u doing spm like a boss. SPM finish d meh?

Maybe next time should organize some small game at edifier booth for giveaway. Especially old customer =)

So... PC fair is getting more and more dry... Went this noon. Nothing in the audio hall stops me from moving to next hall. <5mins in audio hall

Edifier price increase quite a lot? My 1335 bought 1.5 years back 109. Now, the equivalent successor I think is 159 from All IT.

Off topic... Thailand flood causes hard disk price to increase hell a lot over months. Bought 1TB 3.5" half year back for 190. Exact model now sells for 320 ==

If got car, why don't you get it from somewhere nearer. Any free gift/warranty extension for PC Fair??

Come come sell me C3 for RM50

I remember Mr. Edifier is bringing another brand... Forgot the name though. What boss?? d what what what... Really forgot. Tried them out. Quite surprising for a speaker with nice design, not quite big in size, designed for I Products to have quite nice sound and certain level of bass. Mind Mr Edifier clarify =P

The brand is Doss. Mr. Edifier just clarified it for me