i think it is.. or maybe I've seen the Type-C

orly? demm

okay... I see.. thanks for info!

after seeing how the decal stickers on my Mk-II turned out to be not that good, now thinking of getting water slides..
the dry transfers on the hand looks awesome on the dark coloured parts

..and now comes the matter of getting one

I did notice some shops have them.. but not really checked the availability..

I'll find some time to walk around..

I'm using Tamiya silver paint marker.. got recommended by the shop staff himself (from GA).. he said that it's better than the Gundam marker..

the silver colour didn't rub off easily, but still your fingers will have some stain.. but it is very hard to get it off (in case of screw ups and need to scrape off everything )

tissue? i used grade 1000 sand paper and lots of water.. dun have any thinner around
not to forget waiting overnight to make sure it's dried completely...

>>this one should be discussed here: http://forum.lowyat.net/topic/1397850

This post has been edited by rihuhs: Apr 30 2011, 05:44 PM

yeap. unless you can find super-cheap ones

well, I did ask that dude before making my choice

what's the actual use of the wd-40 no mess pen? can it be used to remove paint?

yeah. a lot less problem.. and u can carry it home (or even assemble) right away after u made payment

00 series is relatively new.. for now there's only a handful on MG kits.. if not mistaken only Exia, 00 Qan[T] and GN-X.. coming soon is the 00 Raiser

no one from UC?

thinking of letting go my Zeta Plus.. to let go or not to let go?

Exia is skinny compared to Mk-II



This post has been edited by rihuhs: May 1 2011, 01:53 PM

my Zeta Plus is now officially gone

went to Endah Parade, but unfortunately GSE was closed. it'll only be open on 3rd May
...just when I thought of looking around for any RG Aile Strike

aiyah.. who knows.. they did mention their business hours on Sundays/Public Holidays.. so when I'm just around the area, thinking of having a look..

also want to get another Gundam marker.. the black one that I have now already messed up the tip due to rough jabbing through air vents and stuff.. when used for panel lining, it became thick

it's urs now. I dun care what u want to do with it..

I bet u're gonna be laughing when looking at my building skill

orly? I don't see anything wrong with ur Unicorn.. plus the pic not really clear so cannot say much

the time when I'm building the Zeta Plus, I didn't have any plastic model side cutter yet.. so I'm just using my trusty ol' nail clipper, plus some trimming with a knife.. I only got to use one once I started my Strike + IWSP..

just using what is available

now my side cutter feels a little tumpul oledi..

the same case with Exia..at first tried to put it on, but ended ruining the sticker due to round surface

you might need to cut about 1mm away from the part, and then trim it with a knife

MG Exia was my first gunpla. that time I just follow whatever there is in the manual..

---

Added on May 1, 2011, 8:38 pmI'm not sure about universal water decals.. but I notice mgs2u got some labeled as "mgs2u special" that looks quite different from what Bandai has produced.. maybe it's their own custom made ones? try check it out.. maybe there's some that you're looking for

This post has been edited by rihuhs: May 1 2011, 08:38 PM