hav guide to oc e8400..better c there..i usng e8400 too dun hav prblm to oc..

? thought cstkl1 and I already explained....

This post has been edited by campsol2k: Jun 15 2008, 03:02 AM

er...i guess have to see ur cpu-z to be clear

since you insist, okay, I will edit this post either tonight or tomorrow.

P5N32-SLI ???

is it a nvidia SLI mobo?
680i chipset mobo?

rgds

Yes

? thought cstkl1 and I already explained....

to see more sifu here


This post has been edited by hawkl: Jun 16 2008, 12:15 AM

hello all guru!

i have a problem here. I just bought a gigabyte ma-57sli-ds4 mobo runs by athlon x26400 be with 4gig horsepower. Im still new at this OC thing but ive tried a few on my previous biostar and it works.

With this mobo, everytime i switch the hertz, volts a bit, its stop functioning until i restart several time. Gigabytes overcloaking software also didnt work well. i can only manage to increase 0.1-0.4hgz and the rest it jammed.

Any solution

quite sad jus cn oc a little oli..y dun buy p35 ds3 ka suitable 4 oc...

Where?

asking to all sifu..guru and sensei.....wat the max E4600 can go....

may i ask

what is pencil mod?

i wanna mod

i wanna try

IM A DAREDEVIL!! ^^

I do tried until 1800MHz FSB for my 9300.
Not problem at all for the 1st few hours for those who know my story.

-pWs-

Yesterday manage to overclock to 3.6.Run prime for 4 min no problem. After that the machine starting to hang. After restart, hung at Windows Start-up Screen. Restart again hung again. Damn tension now. Pls assist sifu. Below is my settings.

FSB Memory clock mode - unlinked (Try also link)
FSB (QDR) MHz - 1600
FSB Memory ratio - Auto
FSB Memory - 800
Vcore volt - 1.25
Memory volt -1.85
1.2HT volt - 1.35
NB volt - 1.35
SB volt - 1.55
CPU VTT volt - 1.35

no one replied me T_T

ask here?

http://forum.lowyat.net/index.php?showtopic=357312&hl=pencil

E8200 + Gigabyte EP35-DS3 at 3.2GHz (400*8).
My Vcore at normal. ddr2, pci-e, fsb,mch, +0.1v
idle at 43 °C
full load (dual prime95) = 60 - 63 °C
FSB:DRAM is at 1:1.
1gbx 1 aeneon ddr2 800

Cpuz show, core voltage = 1.152 - 1.168 v

is this normal? is the temperature high?...
i change the hsf with pentium d 805(copper medium) and use STARS 700 thermal paste.
Scare gonna fry the PROC.. lol

furthermore, dual prime 95 and orthos , which 1 can detect error faster?..

Advance timing control put auto so it automaticly adjusted to 6-5-5-18.
sticker wrote 5-5-5-12, and spd wrote 5-5-5-18...

This post has been edited by decarusz: Jun 23 2008, 07:39 PM

actually u can just leave all ur pcie,fsb and mch on stock...u don need to add those now on such mild clock...

since u are using stock hsf fan...those temps are kinda normal...i have seen others getting around the same as u too....if u are scared then go get a good cpu cooler ba

i normally prefer to use orthos small fft n set the priority to 8....got timer for u to see how long u stress liao and no lags at all n u are free to do all other stuff that u want like gaming

This post has been edited by tkh_1001: Jun 23 2008, 08:50 PM

i read from tweaktown..best to add those for alittle extra stability.. hehe..

But i use stressCPU - Stress CPU with Gromacs core.. which 1 better? o.0?
priority 1.. while installing game, and playing mtv and serving web and webthunder'ing...lol

as i can remember i dont need to add those when i use the mobo last time...u only add those when u are overclocking ur ram or when ur cpu cant get stable by just adding vcore...

personally i have never tried gromac core before... but small fft nvr failed me so far

I put them back to normal.. Still stable so far.. playing NFS pro street.. (damn smoooth) lol.... Hoping it wont bsod suddently...
is 20% Oc consider mild OC?.. how is moderate?.. 50%
how much will mild oc reduce the life span, 1/5 of its life?.