yep u can easily clock it at 3.5G at 250fsb.
vcore around 1.5v

-Original CPU/Socket :2.4A/S478
-Stepping :
-Date : May 05
-FSB :133
-Clock Speed : 2.4GHz
-Voltage (CPU/RAM/Chipset/AGP) :1.4/2.5/NA/1.5
-Chipset :865PE
-Ram Type/Speed/Timings :DDR/333/2.5-8-4-4
-------------------------------
Results.(Min. 3 Filled)

-Highest FSB : 211
-Highest RAM : 211
-Highest Clock Speed : 3797
-Highest Vcore : 1.425
-Highest VDIMM : 2.85
----------------------------
Benchmarks/Stability Testing/ Proof Of Testing. (Min 3 types of testing)
-CPU-Z Validation :

-Prime95 / PrimeTest :
-Super PI/ Super PI MOD :
-Memtest :
-Sandra Memory Bandwidth :
-3DMarks 2005 :
-3DMarks 2003 :
-3DMarks 2001 :

my intel proc kena locked by Dell...=(....3.2 640 jz like that...no where else to go

Change motherboard and you can overclock

Currently mine I OCed from 2.4Ghz to 3.21Ghz 178Mhz FSB 1:1 stable with stock voltage between 1.49V-1.52V

Mine is the old school 2.4B processor C1 stepping

change mobo?..exp ler..currently wanna spend on GC only.if wanna OC intel must need extreme cooling lor..saving money for water cooling also.

which mobo is cheap n good for overclocking if i buy 3.0ghz E..?Intel?Asus?

intel boards cannot oc

asus and DFI are good bets

-Original CPU/Socket : P4 2.4c Northwood
-Stepping : 9, Revision : D1
-Date :
-FSB : 255
-Clock Speed : 3064mhz
-Voltage (CPU/RAM/Chipset/AGP) : default/2.9/default/default
-Chipset : i865pe
-Ram Type/Speed/Timings : BT-D43/DDR510/8-4-4-3
-------------------------------
Results.(Min. 3 Filled)

-Highest FSB : 255fsb
-Highest RAM : DDR510/8-4-4-3
-Highest Clock Speed : 3064mhz
-Highest Vcore : default
-Highest VDIMM : 2.9v

2.4c + AI7

About the benchmark......very lazy to do it.
May update my stat when I oc more.

This post has been edited by allenultra: Aug 24 2005, 10:13 AM


Attached thumbnail(s)

hi all, this one not world record rite?

omg !!! 7ghz?!! wow wow !! here's mine

-Original CPU/Socket : P4 2.4c Northwood
-Stepping : 7
-Date :
-FSB : 150
-Clock Speed : 2700mhz
-Voltage (CPU/RAM/AGP) : 1.525/2.6/1.55
-Chipset : i865pe
-Speed/Timings : DDR375/2.5-4-4-8
-------------------------------
Results.(Min. 3 Filled)

-Highest FSB : 160fsb
-Highest RAM : DDR380/2-4-4-8
-Highest Clock Speed : 2900mhz
-Highest Vcore : default
-Highest VDIMM :

--------------------------------
3dmark01se : 11182
3dmark03 : 3533

This post has been edited by pengster: Aug 26 2005, 02:21 PM

hi, also a newbie on overclocking. planned to overclock my P4 2.4C to run at 3GHz. questions are:
1) using only stock HSF and Icute PSU(450W i think), can go how high? any risk of overheating or under power?
2) using the Abit Is-7e mobo. tried to overclock it with 250Mhz FSB but it cannot boot and giving me the beep sound. FYI, i think i did lock the bus speed for AGP and PCI.

sorry, i know i should have search around first but i think most of the articles i see is using 3rd party HSF and some good PSU. planning to stick with my current HSF and PSU.

Thanks.

davidjun, for ur case. Heat will be a big issue.

I'm using xp90 + delta focusflow and I get 47c temp.
With stock hsf.......around 60c?


and then what ram u using?
if u using a ram that cannot stand high fsb, use the divider.

But then if u want to overclock ur 2.4c, change the PSU and the hsf.

and pengster, 2.4c should run at 200fsb in default.
u sure u using a 2.4c?

This post has been edited by allenultra: Aug 23 2005, 06:21 PM

I would say sell it off and get AMD64/sempron-x64.

Watercooling not necessary anymore unless for freaking high OC.

Well watercooling is necessary if you have a presscott and want to get a high stable overclock.

yo, want to ask all sifus here
overclocking intel just imcrease the FSB only, rite ??
i am a lil bit confused with intel....coz...although some say support DDR400, but the ram only running at 266 or 333 MHz only ??

it mean that the computer can boot and run using ddr400 but the speed of the ram is just running at ddr266 or ddr333. depend on the processor fsb. so if u want to fully utilize ddr400 ram, at least 200fsb is needed. correct me if i'm wrong.

wat model of intel proc that run at DDR400 at stock ?
then if the ram speed is less than a DDR400, then y use DDR400 ?
just for bandwidth purpose ?

any proc that with 800mhz of fsb. using ddr 400 cos if u oc to 200 fsb, u still run at stock timing. if u oc ddr 266 or ddr 333 to ddr 400, u need to find a new timing.correct me if, i'm wrong....

btw, ddr 400 is cheaper.

I'm talking about AMD64/sempron-x64....

not the super hot baby presscott.

Why you say that? AMD 64 better?