Outline ·
[ Standard ] ·
Linear+
INTEL OVERCLOCKING THREAD, TIPS,Q n A, Results...Great For NueBis
|
Hungry_Wolf
|
 Aug 4 2005, 02:44 PM
|
|
-Original CPU/Socket : Celeron D 2.4GHz-Stepping : 4-Date: N/A-FSB : 211-Clock Speed : 3.8GHz-Voltage (CPU/RAM/Chipset/AGP) : VCore: 1.41 VDimm: 1.65-Chipset : Mobo: Intel 848 RAM:KVR BT-D43-Ram Type/Speed/Timings : Stock-Highest FSB : 211-Highest RAM : 211-Highest Clock Speed : 3.8GHz-Highest Vcore : 1.425V-Highest VDIMM : 2.7VCPU-Z Validation : HERE-Prime95 / PrimeTest : -Super PI/ Super PI MOD : -Memtest : -Sandra Memory Bandwidth : -3DMarks 2005 : -3DMarks 2003 : -3DMarks 2001 : 8659(ATI Radeon 9550: STOCK) This post has been edited by Hungry_Wolf: Aug 23 2005, 06:22 PM |
|
|
|
|
|
Hungry_Wolf
|
Aug 23 2005, 11:18 PM
|
|
|
QUOTE(LittleLinnet @ Aug 23 2005, 11:02 PM) yo, want to ask all sifus here overclocking intel just imcrease the FSB only, rite ?? i am a lil bit confused with intel....coz...although some say support DDR400, but the ram only running at 266 or 333 MHz only ?? it mean that the computer can boot and run using ddr400 but the speed of the ram is just running at ddr266 or ddr333. depend on the processor fsb. so if u want to fully utilize ddr400 ram, at least 200fsb is needed. correct me if i'm wrong. |
|
|
|
|
|
Hungry_Wolf
|
Aug 24 2005, 01:05 AM
|
|
|
QUOTE(LittleLinnet @ Aug 24 2005, 12:17 AM) wat model of intel proc that run at DDR400 at stock ? then if the ram speed is less than a DDR400, then y use DDR400 ? just for bandwidth purpose ? any proc that with 800mhz of fsb. using ddr 400 cos if u oc to 200 fsb, u still run at stock timing. if u oc ddr 266 or ddr 333 to ddr 400, u need to find a new timing.correct me if, i'm wrong.... btw, ddr 400 is cheaper. |
|
|
|
|
Quote
0.0432sec
0.39
7 queries
GZIP Disabled