Undermount
1) save space, as you do not have the outer ring.
2) As you do not have the outer ring, water, food and dirt are all inside the bowl instead of on the outer ring and you can clean it easily.
3) More beautiful but Expensive.

Double bowl or single bowl is actually depend on ur need & preference. If u have more space, get a double bowl. If ur space is limited, get a single bowl.

zheilwane cant pm me pricing ma? you said you carry.

zheilwane , i've PM you. maybe you can share with us some nice picture of undermount sink u carrying now.

DOnt have much undermount sink model but this is my best seller.

Bought by Ryansia - http://forum.lowyat.net/index.php?showtopic=1761806&hl=






For Top Mount, can seriously consider SORENTO. THese are my best sellers





This post has been edited by zheilwane: Mar 30 2011, 10:26 PM

If I'm using laminated wood counter top can I use undermount sink? I'm worried the laminated wood will spoil from contact with water.

Do you have Teka 2 bowl sink with soap dispenser or any similar product and how much is the cost? Which one look nicer and presentable between top mount and undermount with granite table top? Why some hole for the sink tap is on the sink but some in on the table top? Which one is better?

This post has been edited by siti aishah bakar: Apr 1 2011, 10:08 PM

Actually originally the sinks do not have holes. If u decided to get a sink tap that comes out from the wall, then u do not drill a hole on ur sink. If u wan it to be installed on the sink, then u ask ur plumber to tebuk lubang.

If u r looking for beautiful Sink taps, would recommend u to install it on the sink. Hard to explain much here, you will need to drop by my showroom and have a look at the products for me to explain in more detail.

Btw, u can get any sink, then ask ur plumber to open holes for tap or soap dispenser

If u r looking for something good and not too big you can go for this.

Product Details
Product Code : SRTKS8801D
Category : New Arrival
Product Name : Double Bowl
Price : RM 1,xxx.00 (c/w chopping board & soap dispenser)
Material : Stainless Steel 304
Measurements : 825 x 455 x 220 x 1.2mm

Or something Big

Product Details
Product Code : SRTKS 2028F
Category : Kitchen Sink
Product Name : Double Bowl
Price : RMxxx.00
Material : Stainless Steel 304
Measurements : 1090 x 500 x 220 x 0.9mm

This post has been edited by zheilwane: Apr 1 2011, 10:53 PM

zheilwane, can granite sink tebuk lubang for the sink tap?
tq

can, why not. For granite sink, u will need to let us know u wan to put a mixer or cold tap den we tebuk for u

thanks, zheilwane.
btw, what is the brand of this sink?
what is the dimension?

many thanks again

The dimension is 820mm x 460mm x 250mm

Can top mount sink be used as an under mount sink??

---

Added on April 4, 2011, 6:36 pmFor bathroom sink that put on top of the counter, actually what is the height of the couter top so when we put the sink on the top it won be too high.

This post has been edited by REEN YONG: Apr 4 2011, 06:36 PM

Top mount can b used as undermount




For more details, u will need to drop by my showroom as discussed earlier ahhaha, my showroom minor reno has finally completed. So, how is ur survey at Perfect Living?

Bought a lot of things in the Perfect Living. But I will still get the hood and hod from you as promised. Will drop by one day to place the order. The discount still on ya??

no problem. One of the forumer (happyday119) was kind enough to share some photos with me.



This post has been edited by zheilwane: Apr 5 2011, 08:55 PM

Why the induction side look so old and can we put the ring on top the induction side?? I though the base of the pot/wok must put on the induction plate. Am i right?

where is the stock clearance ???

any significant difference between one piece sink and two piece sink? A salesman recommended me to get a one piece undermount sink, RM 1,000+ while two piece sinks are around RM 400 only

actually one piece or two piece, both are equally durable as long as the sink's thickness is more than 0.8mm. Some of sorento sinks are two piece and they are very durable. If the sink is thin like 0.6mm and you weld it, the joints will b thin and when u put heavy things on your sink, it cant withstand the weight. If u get a one piece sink and it is around 0.6mm, you will still have the same problem. One thing u can do, check the kitchen sink that u are currently using for your old house, most probably it is a two piece sink, i bliv it is still OK after so many years.

Teka is good