@munzamir
thanks mate...
should try WC bro,u will forget abt air cooling....

@owikh
yeah the AVX thingy on SP1...hope my cooling can cope @ 5ghz with the brutal W7 SP1 environment....

@FiragaZ
thanks bro...
yeah the temp quite nice...but i think my system need to be stressed on W7 SP1,if pass than can consider legit...hehe


@lichyetan
10c diff bro??
why dont u try RMA ur proc??that proc can consider faulty right??
i also dont understand abt the quality of intel's proc from MY...
izit that bad??hmmm...

already try clear CMOS?

or maybe u can try update new bios to fix the bug/problem??

@linkinawe
DRAM voltage seems quite low to me...try set auto 1st and enable spread spectrum

@DesktopLimousine
u should read more about EIST...
with proper cooling u can run 24/7 @ 4.5Ghz speed or even 5Ghz like owikh and others did...

5Ghz on 2600k bro?if yes really nice temp...

Edit : ok,surfing with phone,kenot see ur sig...now can...nice



This post has been edited by selfdz87: Jun 10 2011, 10:25 PM

guys izit safe tu run 1.7-1.72v vdimm 24/7 on SB with PSC's chip?
ive done 1.7v b4 on 1st gen i7...not sure abt SB...thats why i ask...

@owikh
is this normal GFlops for 4.8Ghz on W7 SP1 bro?
i still cannot get the 100++ GFlops...



ignore the wrong double cpu-z ss,1 should be mobo tab...

This post has been edited by selfdz87: Jun 16 2011, 08:35 PM

owikh,thanks...
i already try the latest linx u gave...seems u are right...
im using the older version...
but i cannot set mem above 3mb...
not even 2mb i can set...
mybe bcoz im using 32bit win7 sp1...
but the temp really shoot up....



This post has been edited by selfdz87: Jun 17 2011, 12:36 PM

yeah,its 32bit limitation...
but now i already move to 64bit SP1,its really crazy mang....my OC setting on W7 32bit SP1 n SP0 cannot work anymore...BSOD,its need more vcore,really crazy
i get average around 127GFlops on 64bit with same setting...just vcore need to add more
still running Linx now,hopefully can pass with minimal voltage bump...

finally pass 20 loop on 64bit SP1,without voltage increase....
b4 this it failed bcoz of unstable DRAM setting...1866Mhz C9 need more than 1.65v for my noob ram to stable ...127GFlops average
back down to 1600Mhz C8 and i get 129GFlops average....clearly linX likes lower latency RAM...



This post has been edited by selfdz87: Jun 17 2011, 06:07 PM

owikh..running 3x quad rad in LD already??or still in TJ07?
btw nice clock...Dom GT doing quite good...tRCD cannot be tighten anymore?
i wish i have some money to buy a pair of good RAM for myself...

8c is a big decrease in temp bro...good job!!!
wheres ur ripjaws-x C7??
wanna see the performance of that kit...
thinking to grab one...

yes bro loius
this kit is seriously good...
can do 2133 7-8-7 bro??

fuu...thats hot bro...
do u disable intel speedstep and all power saving options?

my cooling n processor suffer a lot in win7 SP1...for 5ghz even i set vcore 1.48v still not stable,...
normally 1.4v-1.41v on Win7 SP0 already stable for 5Ghz...
i managed to run it stable 4.8ghz @ 1.38v only for now...
extra 200Mhz need more juice than i can imagine...

wow onboard SSD...1st time i saw it...
enuf to install OS...

This post has been edited by selfdz87: Jun 29 2011, 11:03 PM

@dj2004
still good...can push more and try to stay below 90c...

@sniper69
u running on W7 SP1 bro?

the temp diff is normal on SB i think coz mine also like that...
i never try 4.9Ghz...lol
from 4.8 straight to 5ghz(1.4v solid stable for me) on SP0...
but SP1 suck too much voltage for my chip to get stable @ 5Ghz <--------------- kenot brain this
thats why i stay @ 4.8Ghz for now...