Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
125 Pages « < 46 47 48 49 50 > » Bottom

Outline · [ Standard ] · Linear+

 HTC Wildfire V4, Hello, Froyo! Guide to updating to Froyo

views
     
prs
post Dec 28 2010, 03:04 PM

Getting Started
**
Junior Member
114 posts

Joined: Sep 2008


a quick question for user 1.15 RUU to 1.25

if we hard reset, what will we get?
squareballs
post Dec 28 2010, 03:05 PM

Look at all my stars!!
*******
Senior Member
4,331 posts

Joined: Jan 2007



i remove the card while doing RUU
BUt Froyo needs SD card inserted, i just copy the whole sd card to my pc..
prs
post Dec 28 2010, 03:07 PM

Getting Started
**
Junior Member
114 posts

Joined: Sep 2008


QUOTE(endymeon @ Dec 28 2010, 02:52 PM)
i used the touch input which already have language selection at the bottom left button...
*
thansk man =.= i got it now
xngjn
post Dec 28 2010, 03:07 PM

Regular
******
Senior Member
1,239 posts

Joined: Sep 2008
follow this http://www.thedroiddemos.com/2010/09/21/ho...eo-walkthrough/

teach u how to install hboot drivers for yours phone.
-download 1.25 RUU
-follow "Removing root from your phone" guide at first page
Snowguy2068
post Dec 28 2010, 03:07 PM

Enthusiast
*****
Senior Member
811 posts

Joined: Apr 2010
From: Penang,Malaysia


user name and password are being requested by http://www1.htc.com. The site says: "www1.htc.com"
xngjn
post Dec 28 2010, 03:09 PM

Regular
******
Senior Member
1,239 posts

Joined: Sep 2008
QUOTE(prs @ Dec 28 2010, 03:04 PM)
a quick question for user 1.15 RUU to 1.25

if we hard reset, what will we get?
*
after hard reset u will get 1.25. if u wan go back to 1.15 then u need get 1.15 ruu. and do the same method
Snowguy2068
post Dec 28 2010, 03:11 PM

Enthusiast
*****
Senior Member
811 posts

Joined: Apr 2010
From: Penang,Malaysia


after i remove root how do i dl ruu into my phone?

and if i done all the above i would able to dl froyo?


Added on December 28, 2010, 3:21 pm 1. Download the unrEVOked modified USB driver and expand it somewhere you will remember.
2. Turn off your phone, then boot it into the HBOOT menu by holding power and volume down.
3. On your phone, you will have to select HBOOT USB at that menu by pressing volume down four times, then power. Wait until the screen flashes through an “SD Checking” message before pressing buttons; otherwise, the phone will ignore keypresses.
4. Connect the phone to your Windows machine with a USB cable and wait for the phone to say HBOOT USB PLUG on screen.
5. Open Device Manager.
6. Click Start, then right click on Computer, then click Properties, then click Device Manager.
7. Under Other devices, you should now see the Android 1.0 device, similar to the picture below.
8. Right click on Android 1.0 and click Update Driver Software. You should then be at the following screen:
9. Click on Browse my computer for driver software.
10. Click on Browse and select the Android USB Driver folder on on your computer, click ok, then click next.
11. You should get a status bar indicating that the driver is installing. If you get any warnings, just click Ok.
12. Your driver should install and your screen will look like below.
13. Click Close and make sure Android Bootloader Interface is listed under Android Phone.


◄●Instructions●►

1. Make sure you downloaded Unrevoked3 for your OS.
2. If you're on Windows, make sure you "uninstall HTC Sync or any other program that might talk to the phone over USB (doubletwist, etc). They will cause problems" (Unrevoked.com).
3. Plug your phone into your computer with USB.
4. Drag down from the notification bar on your phone and select "Charge Only" and "Remember this"
5. Make sure your phone has USB Debugging turned on by going to Menu>>Settings>>Applications>>Development and checking USB debugging.
6. Run the Reflash application that you downloaded.
7. Unrevoked will run its processes. Follow the few instructions it gives and thats it!


You're now rooted!

when i hboot i cant find this
'hboot usb'



This post has been edited by Snowguy2068: Dec 28 2010, 03:21 PM
whitegoh
post Dec 28 2010, 03:22 PM

Regular
******
Senior Member
1,207 posts

Joined: May 2009
wei, after the update RUU to 1.25.
when it say finish, can remove the cable right?


Added on December 28, 2010, 3:24 pmyeah...1.25 already....
update froyo take how long de???

This post has been edited by whitegoh: Dec 28 2010, 03:24 PM
xngjn
post Dec 28 2010, 03:26 PM

Regular
******
Senior Member
1,239 posts

Joined: Sep 2008
QUOTE(whitegoh @ Dec 28 2010, 03:22 PM)
wei, after the update RUU to 1.25.
when it say finish, can remove the cable right?


Added on December 28, 2010, 3:24 pmyeah...1.25 already....
update froyo take how long de???
*
depend yours internet speed. i downlaod is less than 5 minute. install i think got around 10minute
onua
post Dec 28 2010, 03:26 PM

New Member
*
Junior Member
17 posts

Joined: Oct 2010


QUOTE(whitegoh @ Dec 28 2010, 03:22 PM)
wei, after the update RUU to 1.25.
when it say finish, can remove the cable right?


Added on December 28, 2010, 3:24 pmyeah...1.25 already....
update froyo take how long de???
*
its been 1hr now-54%
approx. 2 hrs..
xngjn
post Dec 28 2010, 03:27 PM

Regular
******
Senior Member
1,239 posts

Joined: Sep 2008
QUOTE(Snowguy2068 @ Dec 28 2010, 03:11 PM)
after i remove root how do i dl ruu into my phone?

and if i done all the above i would able to dl froyo?


Added on December 28, 2010, 3:21 pm  1. Download the unrEVOked modified USB driver and expand it somewhere you will remember.
  2. Turn off your phone, then boot it into the HBOOT menu by holding power and volume down.
  3. On your phone, you will have to select HBOOT USB at that menu by pressing volume down four times, then power. Wait until the screen flashes through an “SD Checking” message before pressing buttons; otherwise, the phone will ignore keypresses.
  4. Connect the phone to your Windows machine with a USB cable and wait for the phone to say HBOOT USB PLUG on screen.
  5. Open Device Manager.
  6. Click Start, then right click on Computer, then click Properties, then click Device Manager.
  7. Under Other devices, you should now see the Android 1.0 device, similar to the picture below.
  8. Right click on Android 1.0 and click Update Driver Software. You should then be at the following screen:
  9. Click on Browse my computer for driver software.
  10. Click on Browse and select the Android USB Driver folder on on your computer, click ok, then click next.
  11. You should get a status bar indicating that the driver is installing. If you get any warnings, just click Ok.
  12. Your driver should install and your screen will look like below.
  13. Click Close and make sure Android Bootloader Interface is listed under Android Phone.
◄●Instructions●►

  1. Make sure you downloaded Unrevoked3 for your OS.
  2. If you're on Windows, make sure you "uninstall HTC Sync or any other program that might talk to the phone over USB (doubletwist, etc). They will cause problems" (Unrevoked.com).
  3. Plug your phone into your computer with USB.
  4. Drag down from the notification bar on your phone and select "Charge Only" and "Remember this"
  5. Make sure your phone has USB Debugging turned on by going to Menu>>Settings>>Applications>>Development and checking USB debugging.
  6. Run the Reflash application that you downloaded.
  7. Unrevoked will run its processes. Follow the few instructions it gives and thats it!
You're now rooted!

when i hboot i cant find this
'hboot usb'
*
for RUU u doesn't need Unrevoked3

squareballs
post Dec 28 2010, 03:27 PM

Look at all my stars!!
*******
Senior Member
4,331 posts

Joined: Jan 2007



QUOTE(whitegoh @ Dec 28 2010, 03:22 PM)
wei, after the update RUU to 1.25.
when it say finish, can remove the cable right?


Added on December 28, 2010, 3:24 pmyeah...1.25 already....
update froyo take how long de???
*
I think depends on your internet speed.. MIne almost done rclxms.gif
whitegoh
post Dec 28 2010, 03:27 PM

Regular
******
Senior Member
1,207 posts

Joined: May 2009
mean, definitely need wifi to update, if use maxis 3g..
hohoho...


Added on December 28, 2010, 3:29 pmwei, u all confirm 1.25 sure get froyo gar???

This post has been edited by whitegoh: Dec 28 2010, 03:29 PM
onua
post Dec 28 2010, 03:29 PM

New Member
*
Junior Member
17 posts

Joined: Oct 2010


QUOTE(whitegoh @ Dec 28 2010, 03:27 PM)
mean, definitely need wifi to update, if use maxis 3g..
hohoho...
*
Ya..mine using maxis 3g..so damn slow..haha
xngjn
post Dec 28 2010, 03:30 PM

Regular
******
Senior Member
1,239 posts

Joined: Sep 2008
here is a simple guide :

http://www.unrevoked.com/rootwiki/lib/exe/...-usb-driver.zip
http://shipped-roms.com/shipped/Buzz/RUU_B...2190_signed.exe

1. boot into hboot (volume down + power)
2. now device manager >> Other Device - Android 1.0
3. right click Update driver software >Browse My Computer For Driver Software> choose Android USB Driver( the file u just extract)
4. u will see Android Bootloader Interface under Android Phone in Device Manager
5. restart yours phone
6. enavle USB debuging
7. in device manager u will see ADB under Other device
8. right click select Update Driver Software>Browse My Computer for Driver Software>Let me pick from a list of a device drivers on my computer>android phone>Android ADB Interface
9. after install complete u will see Android ADB Interface under Android phone

10. Download and run the exe file. (attach usb to phone with USB debugging)
11. On the Welcome screen, click Next to begin the RUU installation.
12. Check the listed instructions in the dialog box and make sure you have done them. Click Next to proceed.
13. A message will then be displayed indicating that the utility is verifying and acquiring information about the Android phone as preparation for the update process. Wait for this verification process to be finished.
14. After the verification process, current information about the Android phone will be displayed. Click Update to proceed.
15. Information about the current image version and the new image update version will be displayed. If you are sure that you want to install the new RUU, click Next to proceed.
16. A confirmation message will appear and show the time it will take to install the necessary files (including radio image) to the Android phone. Click Next to begin the update. A progress bar will run through the screen during the update process.
17. RUU update is complete. Click Finish to exit the utility.

after complete yours phone software version will be 1.25.707.1
now u can check for froyo update


new froyo version will be:

Android Version:
2.2.1

Baseband Version:
13.55.55.24H_3.35.20.10

Kernel Version:
2.6.32.21-g6c55ee4

Build Number:
2.24.707.1 CL298423

Software Number:
2.24.707.1


This post has been edited by xngjn: Dec 28 2010, 03:33 PM
Snowguy2068
post Dec 28 2010, 03:32 PM

Enthusiast
*****
Senior Member
811 posts

Joined: Apr 2010
From: Penang,Malaysia


QUOTE(xngjn @ Dec 28 2010, 03:27 PM)
for RUU u doesn't need Unrevoked3
*
then what do i need?
:|
onua
post Dec 28 2010, 03:34 PM

New Member
*
Junior Member
17 posts

Joined: Oct 2010


QUOTE(Snowguy2068 @ Dec 28 2010, 03:32 PM)
then what do i need?
:|
*
juz sync ur WF to PC and run the RUU..simple as that
Snowguy2068
post Dec 28 2010, 03:43 PM

Enthusiast
*****
Senior Member
811 posts

Joined: Apr 2010
From: Penang,Malaysia


wait then do i need to save my contacts or w/e?
cause all my contacts are on my phone memory

onua
post Dec 28 2010, 03:45 PM

New Member
*
Junior Member
17 posts

Joined: Oct 2010


QUOTE(Snowguy2068 @ Dec 28 2010, 03:43 PM)
wait then do i need to save my contacts or w/e?
cause all my contacts are on my phone memory
*
u nid to have backup bcoz after update, evrythg will be gone like hard reset..
squareballs
post Dec 28 2010, 03:51 PM

Look at all my stars!!
*******
Senior Member
4,331 posts

Joined: Jan 2007



Hoho! Instaling Froyo
user posted image

Just to share
user posted image
RM25 for 2, Penang Perangin Mall


125 Pages « < 46 47 48 49 50 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.7523sec    0.77    6 queries    GZIP Disabled
Time is now: 17th December 2025 - 09:04 AM